BORDO 13mm Drill Chuck suits 3/4″ Universal Shank Mag Base Drills
In StockRelated products
-
Annular Cutters & Sets
BORDO Annular Cutter HSS Metric Kits
- HSS Annular Cutter Sets
- Annular Cutters achieve burr-free finished holes without the need for pre-drilling or step drilling.
- Faster and more accurate than using standard HSS twist drills.
- Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting.
- The precision ground flutes run the entire length of the cutter providing efficient chip removal.
- Increased cutting speed.
- Reduced tooth load.
- Minimized tool wear.
- Extended tool life.
- Close tolerance drilling without runout.
- Reamed quality, burr free finished holes.
- Resharpenable.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
INDUSTRIAL TOOLS & MACHINERY
ITM Pilot Pin – To Suit 50mm Depth
A pilot pin serves three main purposes:.
Ejects the slug at the end of the cut.
Provides coolant feed into the centre of the cutter.
Locates the centre of the cutHOLEMAKER PILOT PIN, 6.34MM x 102MM, TO SUIT 50MM DEPTH OF CUT CUTTERS
Diameter: 6.34mm
Annular Cutter Depth of Cut: 50mm
Overall Length: 102mm(0 reviews) -
Annular Cutters & Sets
BORDO MTS Adaptors for Annular Cutter
- Bordo hardened steel MTS Annular Cutter Adaptors allow the use of annular cutters in drill presses or lathes fitted with an MTS chuck.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutters & Sets
ITM 50mm Depth Annular Cutter
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page