ALEMLUBE GREASE COUPLER 14516
90deg Push On Grease Coupler 1/8″ NPT
• Industrial quality grease gun coupler suitable for standard hydraulic grease nipples
• 1/8” NPT thread
• Fits most grease gun types: manual, pneumatic and battery powered grease guns
• Compact design enables access to difficult to reach lube points
• Poly seal fits most grease nipples
• Length of 41mm
• Weight of 26gm
Related products
-
Fuel, Grease & Oil Equipment
MACNAUGHT Bop 20L UN Stem Kit
The BOP 20 litre (5 gal) stem kit includes 1.5m (5 ft) dispensing hose with gun, common bung adaptors and a 20 litre stem suitable for engine oil, gear oil, hydraulic oil (oils up to SAE140 viscosity), automatic transmission fluid (ATF) and engine coolant.
- Suitable for engine oil, gear oil, hydraulic oil (oils up to SAE140 viscosity), automatic transmission fluid (ATF) and engine coolant
- Drum size – nominal 15-25 litre (5 gal)
- 1.5 metre (5 feet) reinforced transparent dispensing hose
- Lubricating Oils – Flow rate up to 3.5 L/Min (SAE40 at 20OC)
- Heavy Oils – Flow rate up to 2 L/Min (SAE140 at 20OC)
- Automatic Transmission Fluid (ATF) – Flow rate up to 4.5 L/Min
- Coolant – Flow rate up to 5.8 L/Min
(0 reviews) -
Fuel, Grease & Oil Equipment
ALEMLUBE 12V Intelligent Tank Pump 40LPM
Incorporating a new level of pump intelligence allowing the pump to monitor its own activity and performance
Flow rates of up to 40L/min
Pump body in cast iron with anticorrosion treatment
Support base, completely flexible for different installations
Vane type pump with sintered steel rotor and acetalic resin vanes
IN/OUT with hose tail connection, flexible for different customised solutions
DC brushes motor with permanent magnets
Protection IP55Continuous duty electric motor fully protected by amperage and temperature
ON/OFF switch integrated with remote option
Direct connection to level switch LEDºs for working status monitoring
Local file with events memory3/4″ bspf inlet/outlet
10 amp with a 25 amp fuse
Weight: 3.35kg(0 reviews) -
Fuel, Grease & Oil Equipment
MACNAUGHT 240V DIESEL MINI BOWSER 100LPM -6M HOSE
The 240V Diesel Mini Bowser offers a new pump to satisfy operators looking for a robust unit that effectively delivers high volume diesel. This compact unit comes as a complete package that allows refuelling at flow rates up to 100LPM. Equipped with an easy to use, accurate mechanical meter that can be calibrated on-site, this unit also has a smart on/off switch integrated into the nozzle holder. Extremely versatile, the bowser can be installed directly onto a wall or to an existing structure.
- Suitable for Diesel use only
- Flow rate up to 100LPM
- Inlet/Outlet: 1″ BSP(F)
- 30 minute duty cycle
- Built-in nozzle holder with on/off switch
- IP55 protection
- 240V pump with meter
- 4-digit reset total
- 8-digit accumulative total
- 6m x 1″ delivery hose with automatic nozzle
- 1″ x 2m suction hose
(0 reviews) -
Fuel, Grease & Oil Equipment
MACNAUGHT All Purpose Oil Transfer Pump
The MAOP20 All-Purpose 20L Oil Transfer Pump is designed for dispensing most service fluids including engine, gear, transmission, hydraulic and some engine coolants from 20L – 25L drums. An extendable suction tube and two additional bung adaptors ensure that the expanding range of different size and types of drums are easily catered for. Delivery on the down-stoke makes this pump easy to use especially when the drum is low on fluid. An extra-long clear delivery hose gives easy identification of the fluid type and allows better reach into difficult areas.
(0 reviews)