Wind Farm Supplies
Showing 181–216 of 283 results
-
Hardware ConnectorsLINQ Karabiner Triple Action Steel Alloy 26mm
- Opening: 26mm
- Weight: 275gm
- Rating: 30kN
- Width: 82mm
- Length: 123mm
(0 reviews) -
Pole StrapsLINQ Pole Strap 2m Triple Action Karabiner
- Double Action Karabiner also available (HPS20KD)
(0 reviews) -
Pole StrapsLINQ Pole Strap with Snap Hook
- Snap hook at each end
- Custom lengths available
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Rescue KitsLINQ Res-Q Rescue Kit
- 4:1 pulley system provides reduced effort on the rescuer. Every 100kg of mass only requires 25kg of effort.
- RES-Q Kit comes pre-assembled. No hassle with assembly of pulley and rope.
- Static kernmantle rope comes with I.D trace as per AS/NZS 4142 requirement for traceability. Min break load of 35kN providing enhanced strength.
- Raise and lower casualty makes the RES-Q Kit versatile.
- Back up braking mechanism comes standard. This can be engaged by the rescuer or setup to brake automatically.
- Comes with two (2) tie offs to allow for mounting of the RES-Q Kit and to also utilise the braking mechanism as standalone device without being attached to the rescuer.
- Heavy duty bag c/w shoulder straps and the convenience of a stowage area for the rescue pole.
- Standard RES-Q kit supplied with 50mtrs of rope.
- Custom rope lengths available – 80m (RESQKIT-80), 100m (RESQKIT-100) &150m (RESQKIT-150)
(0 reviews) -
Rescue KitsLINQ Res-Q Rescue Kit Bag
- RESQ-KIT Rescue kit bag only
- Heavy duty bag c/w shoulder straps and the convenience of a stowage area for the rescue pole.
(0 reviews) -
-
Tool LanyardsLINQ Self Fusing Silicone Tool Tape
- Self fusing silicon tape for easy adhesion, no heat required
- Hi Vis Orange tape for easy visual location
- Durable silicone provides long lasting adhesion and grip
- Tape Material: Silicone
- Weight: 95 grams
- Width: 25mm
- Length: 10M
- Hammer not included
(0 reviews) -
Tool LanyardsLINQ Sliding Loop Lock
- Hi Vis orange tail for easy visual location
- 3 Bar stitch pattern for increased strength
- Available in pack of 3
- Lanyard Material: Durable polyester
- Plastic Material: PE (Polyethylene)
- Loop Tail Material: Polyester
- Weight: 10 grams
(0 reviews) -
Tool LanyardsLINQ Tool Lanyard with 2 Double Action Karabiners
- Tool Lanyard rated to maximum load limit of 5kg
- 80cm length extends to 120cm
- Hi Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- 2 x Swivel Snap Hooks to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Anodized aluminium alloy
- Weight: 85 grams
- Length: 80cm (extends to 120cm)
- Maximum Working Load Limit: 5kg
(0 reviews) -
Tool LanyardsLINQ Tool Lanyard with 2 Swivel Snap Hooks
- Tool Lanyard rated to maximum load limit of 1.86kg
- 80cm length extends to 120cm
- Hi Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- 2 x Swivel Snap Hooks to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Electroplated zinc alloy
- Weight: 75 grams
- Length: 80cm (extends to 120cm)
- Maximum Working Load Limit: 1.86kg
(0 reviews) -
Tool LanyardsLINQ Tool Lanyard with Double Action Karabiner & Detachable Tool Strap
- Tool Lanyard rated to maximum load limit of 0.6kg
- 60cm length extends to 80cm
- Detachable sliding loop lock keeps tools in place and connected, can be used for quick tool swap over
- Hi Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- Swivel Snap Hook to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Electroplated zinc alloy
- Plastic Material: PE (Polyethylene)
- Loop Tail Material: Polyester
- Weight: 50 grams
- Length: 60cm (extends to 80cm)
- Maximum Working Load Limit: 0.6kg
(0 reviews) -
Tool LanyardsLINQ Tool Lanyard with Double Action Karabiner to Loop Tail
- Tool Lanyard rated to maximum load limit of 5kg
- 80cm length extends to 120cm
- Hi Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- Swivel Snap Hooks to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Anodized aluminium alloy
- Plastic Material: PE (Polyethylene)
- Loop Tail Material: Polyester
- Maximum Working Load Limit: 5kg
- Weight: 60 grams
- Length: 60cm (extends to 80cm)
(0 reviews) -
Tool LanyardsLINQ Tool Lanyard with Swivel Snap Hooks & Detachable Tool Strap
- Tool Lanyard rated to maximum load limit of 0.6kg
- 60cm length extends to 80cm
- Detachable sliding loop lock keeps tools in place and connected, can be used for quick tool swap over
- Hi Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- Swivel Snap Hook to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Electroplated zinc alloy
- Plastic Material: PE (Polyethylene)
- Loop Tail Material: Polyester
- Weight: 50 grams
- Length: 60cm (extends to 80cm)
- Maximum Working Load Limit: 0.6kg
(0 reviews) -
Tool LanyardsLINQ Tool Lanyard with Swivel Snap Hooks to Loop Tail
- Tool Lanyard rated to maximum load limit of 1.86kg
- 80cm length extends to 120cm
- Sliding loop lock keeps tools in place and connected
- Hi Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- Swivel Snap Hook to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Electroplated zinc alloy
- Plastic Material: PE (Polyethylene)
- Loop Tail Material: Polyester
- Weight: 50 grams
- Length: 80cm (extends to 120cm)
- Maximum Working Load Limit: 1.86kg
(0 reviews) -
Tool LanyardsLINQ Twin Tail Tool Lanyard with 3 Double Action Karabiners
- Tool Lanyard rated to maximum load limit of 5kg
- 80cm length extends to 120cm
- Hi Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- 3 x Swivel Snap Hooks to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Anodized aluminium alloy
- Weight: 130 grams
- Length: 80cm (extends to 120cm)
- Maximum Working Load Limit: 5kg
(0 reviews) -
Tool LanyardsLINQ Twin Tail Tool Lanyard with 3 Swivel Snap Hooks
- Tool Lanyard rated to maximum load limit of 1.86kg
- 80cm length extends to 120cm
- Hi Vis orange lanyard for easy visual location
- 3 Bar stitch pattern for increased strength
- 3 x Swivel Snap Hooks to reduce tangling
- Lanyard Material: Durable polyester/elastic blended webbing
- Connector Material: Electroplated zinc alloy
- Weight: 125 grams
- Length: 80cm (extends to 120cm)
- Maximum Working Load Limit: 1.86kg
(0 reviews) -
Tool LanyardsLINQ Web Tool Tail
- Hi Vis orange tail for easy visual location
- Available in pack of 3
- D-Ring Material: Electroplated zinc alloy
- Webbing Material: Polyester
- Weight: 15 grams
- Length: 15cm
(0 reviews) -
Tool LanyardsLINQ Web Tool Tail with Loop
- Sliding loop lock keeps tools in place and connected
- Hi Vis orange tail for easy visual location
- 3 Bar stitch pattern for increased strength
- Available in pack of 3
- D-Ring Material: Electroplated zinc alloy
- Plastic Material: PE (Polyethylene)
- Loop Tail Material: Polyester
- Weight: 15 grams
- Length: 30cm
(0 reviews) -
Tool LanyardsLINQ Wire Tool Sock
- Ultra convenient, expandable, flexible mesh grip sock for holding heavy duty tools, reduce grip abrasion with Silicone Tape
- Similar to a Chinese finger trap, these socks easily slide onto tools yet provide a super strong grip on the tool when pulled with tension
- Each Tool sock has a swivel connection to avoid tangles
- Mesh Material: Stainless steel
- Weight: 20 grams
- Diameter: 20mm
- Length: 30cm
(0 reviews) -
Tool LanyardsLINQ Wrist Strap to Tool Connection
- Coiled tool connector provides compact tool retention
- Plastic coating for durability and comfort
- 2 x Swivel Snap Hooks to reduce tangling
- Maximum tool weight not to exceed 0.8 kg
- Strap Material: Stainless Steel/PE
- Connector Material: Electroplated zinc alloy
- Plastic Material: PE (Polyethylene)
- Weight: 40 grams
- One size fits all
- Maximum Working Load Limit: 0.8kg
(0 reviews) -
Tool LanyardsLINQ Wrist Strap with D Connection
- Elastic wrist strap to provide tight fitting comfort
- Velcro adhesion for ease of access
- D-Ring attached for use with lanyards and tool connectors
- Maximum tool weight not to exceed 0.58 kg
- Strap Material: Polypropylene & polyester composite
- D-Ring Material: PE (Polyethylene)
- Plastic Material: PE (Polyethylene)
- Weight: 40 grams
- One size fits all
- Maximum Working Load Limit: 0.58kg
(0 reviews) -
Wind Farm SuppliesSKYLOTEC ACX Power Ascender
The ACX battery-powered hoist is a motorised system to ensure the transport of persons or loads to areas that are difficult to access and where occasional or recurring work is carried out.
ACX is used, among other things, for cleaning facades or windows, for the maintenance of complex building structures, for the rotor blade maintenance of wind turbines or for transporting loads on masts.
The ACX POWER ASCENDER considerably simplifies and accelerates work on complex structures and makes expensive access systems or lifting platforms superfluous. Countless rescue scenarios can also be carried out efficiently and with minimum effort with the ACX. ACX forms a highly flexible system for easy and cost-efficient cleaning or maintenance.
In an emergency, the ACX can be controlled by remote control. The operation and use of the ACX can be learned in special training courses.
– Simplifies and accelerates work on structures that are difficult to access
– Gentle application
– Control by remote control up to 150 m
(0 reviews) -
HarnessesSKYLOTEC Arg 80 Solution Light Click
An extremely functional rope access & rescue harness ideal for work in overhead cable construction & rotor blade maintenance work on wind power stations. A special stitching technique maintains the V shape of the harness to prevent chaffing in the neck are. Three equipment loopscombined with metal tool loops for tool bag attachment compliment the ARG 80 harness. The ARG 80 Solution LIGHT click offers a narrower & more flexible back support compared to the ARG 80 Solution.
(0 reviews) -
Descenders & Rescue DevicesSKYLOTEC Claw
Made of high-quality stainless steel, the CLAW steel rope runner is suitable for vertical access to higher or lower workplaces on arrester systems with 8-10 mm or 5/16 to 3/8 inch stainless steel ropes. It is particularly characterised by its excellent running properties, which allow fatigue-free ascent and descent. The fall arrester that runs along has a well thought-out 3-fold safety device: the internal mechanical lock prevents it from being put on incorrectly, the external mechanical lock only allows it to be opened with both hands. In addition, a skull and crossbones symbol warns the user if the rope is put on incorrectly. If the climber slips or falls, CLAW locks immediately and the strap energy absorber reduces the forces. CLAW is certified to EN 353-1:2014+A1:2017 and ANSI Z359.16:2016, ANSI/ASSE A14.3-08, CSA Z259.2.5-17, OSHA and secures a maximum of one person weighing 50 to 150 kg.
– High-quality steel rope runner made of stainless steel.
– Fatigue-free ascent and descent
– Sophisticated 3-fold safety device(0 reviews) -
Descenders & Rescue DevicesSKYLOTEC Conrest Kit
The rescue stretcher CONREST KIT incl. fixation foot bag enables a quick rescue of injured persons from difficult to access and confined spaces. The short construction fixes the patient’s head, spine, pelvis and arms with a particularly strong and stabilising webbing construction. Thanks to numerous handles, the CONREST KIT offers rescuers and emergency services many possibilities to move the casualty out of the danger zone. In addition, special suspensions can be attached to the carrying loops, which can be connected to a mobile sling system to rescue casualties from a manhole, for example. A clear colour system ensures quick handling: all anchorage points are marked orange. Pre-folded straps make the application very quick and intuitive. CONREST KIT has a stable and solid sliding plate that guarantees safe movement of the patient over edges or obstacles.
(0 reviews) -
Descenders & Rescue DevicesSKYLOTEC Deus One Evacuation Device
The DEUS ONE is a personal, fully automatic self-evacuation device. The very small, handy format offers intuitive operation in emergency situations and is ready-to-use due to its configuration with rope and steel carabiners. Without any necessary additional intervention in the abseiling process, even injured or unconscious persons arrive safely on the ground. The extremely compact and lightweight hybrid rope is only 5.9mm thick and heat-resistant up to 450°C. The set is maximally protected from moisture in a Sealpac packaging and can thus achieve a 15-year service life. All components are packed very practically in a compact, protective bag with adjustable straps, making it easy to take to any workplace.
- the smallest, fully automatic self-evacuation device on the market
- compact to carry on the person
- user weight range: 60kg -140kg
Available in 100m & 160m
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
Equipment BagsSKYLOTEC Drybag Large
Waterproof, backpack strapping
35 l: 120m rope Ø11mm 59 l: 250m rope Ø11mm
– Space for up to 250m rope (11mm diameter) inside depending on size – Two adjustable shoulder straps – Waterproof roll closure, can be used for compression of the pack bag
(0 reviews) -
Equipment BagsSKYLOTEC Duffle Bag
The Duffle bag, in a 60Â litre or 90Â litre version, is a black hole when it comes to storage. For long trips or short trips, with your entire climbing rig or most of your wardrobe, this is the bag for you. It has a zipped outer pocket, zipped mesh pocket on the inside of the lid and is made of robust, water-resistant tarpaulin PVC and 1200Â D Polyester. Wide shoulder straps, which double up as backpack straps, mean the Duffle bag is comfortable to carry even when fully loaded.
Our DUFFLE BAGS have an amazing capacity for carrying all the climbing gear that you need or even just half of your closet.
– One zippered outer pocket – One mesh zippered pocket under the lid – Made of water-repellent tarp – Reinforced floor made of 1200D polyester
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
LanyardsSKYLOTEC Ergogrip SK12
Pole Strap with protective sleeve
Work positioning ropes are for getting into the right working position. The core-sheathed ropes used by SKYLOTEC can withstand extreme edge loads, are resistant to abrasion, remain soft in damp conditions and feature a long service life. It is an extremely simple matter to adjust the Ergogrip range with self-locking carabiners with one hand.
(0 reviews) -
LanyardsSKYLOTEC Ergogrip SK16
Kernmantel rope European style adjustable POLE STRAP with ergonomic adjuster for safe and easy handling. Minimum adjustable length 45cm. Designed for work positioning, assisted climbing & restraint applications on structures such as mono poles, masts & towers. Available in various lengths.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Lifting DevicesSKYLOTEC Gordon Lift System 2:1
his pulley system based on the GORDON RESCUE facilitates the transport of loads up to 300 kilograms. The device is self-locking in one direction to prevent loads from falling, even if the rope is released. This high-quality device comes with a 2:1 configuration with rope pulley, two carabiners and an 11 mm rope of the desired length incl. a DRYBAG. Important note: Pulley system only, no PPE!
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
