Workshop Equipment
Showing 37–72 of 219 results
-
Hollow Cylinders Double Acting (EDH Series)TQB BRANDS 30T Double Acting Ram – Hollow Piston – 178mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 30,000kg
- Stroke: 178mm
- Max Cylinder Capacity: 33T Advance, 22T Retract
- Effective Cylinder Area: 47.7cm2 Advance, 32.4cm2 Retract
- Oil Capacity: 849cm3 Advance, 577cm3 Retract
(0 reviews) -
Hollow Cylinders Single Acting (ESH Series)TQB BRANDS 30T Single Acting Ram – Hollow Piston – 156mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 30,000kg
- Stroke: 156mm
- Effective Cylinder Area: 48cm2
- Oil Capacity: 744cm3
- Collapsed Height: 330mm
- Extended Height: 485mm
(0 reviews) -
Hollow Cylinders Single Acting (ESH Series)TQB BRANDS 30T Single Acting Ram – Hollow Piston – 64mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 30,000kg
- Stroke: 64mm
- Effective Cylinder Area: 48cm2
- Oil Capacity: 307cm3
- Collapsed Height: 179mm
- Extended Height: 242mm
(0 reviews) -
Pancake Style Single Acting (ESL Series)TQB BRANDS 30T Single Acting Ram – Pancake Style – 13mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 30,000kg
- Stroke: 13mm
- Effective Cylinder Area: 41.8cm2
- Oil Capacity: 54cm3
- Collapsed Height: 58.5mm
- Extended Height: 71mm
(0 reviews) -
Pancake Style Single Acting (ESL Series)TQB BRANDS 30T Single Acting Ram – Pancake Style – 62mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 30,000kg
- Stroke: 62mm
- Effective Cylinder Area: 41.8cm2
- Oil Capacity: 259cm3
- Collapsed Height: 117mm
- Extended Height: 179mm
(0 reviews) -
AccessoriesTQB BRANDS 4 Way Connector – Female 3/8″ NPT NPT to Female 3/8″ NPT
Specifications
- F 3/8 – 18 NPT to Female 3/8 – 18 NPT
(0 reviews) -
High Tonnage Double Acting (EDX Series)TQB BRANDS 50T Double Acting Ram – 150mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 50,000kg
- Stroke: 150mm
- Max Cylinder Capacity: 53T Advance, 26T Retract
- Effective Cylinder Area: 75.4cm2 Advance, 36.9cm2 Retract
- Oil Capacity: 1,131cm3 Advance, 1,131cm3 Retract
(0 reviews) -
General Purpose Single Acting (ES Series)TQB BRANDS 50T Single Acting Ram – 159mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 50,000kg
- Stroke: 159mm
- Effective Cylinder Area: 70.9cm2
- Oil Capacity: 1127.31cm3
- Collapsed Height: 282mm
- Extended Height: 441mm
(0 reviews) -
General Purpose Single Acting (ES Series)TQB BRANDS 50T Single Acting Ram – 51mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 50,000kg
- Stroke: 51mm
- Effective Cylinder Area: 70.9cm2
- Oil Capacity: 361.59cm3
- Collapsed Height: 176mm
- Extended Height: 227mm
(0 reviews) -
Lock Nut Cylinders Single Acting (EL Series)TQB BRANDS 50T Single Acting Ram – Locking Collar – 150mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 50,000kg
- Stroke: 150mm
- Effective Cylinder Area: 70.8cm2
- Oil Capacity: 1062cm3
- Collapsed Height: 264mm
- Extended Height: 414mm
(0 reviews) -
Pancake Style Single Acting (ESL Series)TQB BRANDS 50T Single Acting Ram – Pancake Style – 16mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 50,000kg
- Stroke: 16mm
- Effective Cylinder Area: 63.6cm2
- Oil Capacity: 102cm3
- Collapsed Height: 67mm
- Extended Height: 83mm
(0 reviews) -
Pancake Style Single Acting (ESL Series)TQB BRANDS 50T Single Acting Ram – Pancake Style – 60mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 50,000kg
- Stroke: 60mm
- Effective Cylinder Area: 63.6cm2
- Oil Capacity: 382cm3
- Collapsed Height: 122mm
- Extended Height: 182mm
(0 reviews) -
General Purpose Single Acting (ES Series)TQB BRANDS 5T Single Acting Ram – 127mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 5,000kg
- Stroke: 127mm
- Effective Cylinder Area: 7.1cm2
- Oil Capacity: 90.2cm3
- Collapsed Height: 215mm
- Extended Height: 342mm
(0 reviews) -
General Purpose Single Acting (ES Series)TQB BRANDS 5T Single Acting Ram – 16mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 5,000kg
- Stroke: 16mm
- Effective Cylinder Area: 7.1cm2
- Oil Capacity: 11.4cm3
- Collapsed Height: 42mm
- Extended Height: 58mm
(0 reviews) -
General Purpose Single Acting (ES Series)TQB BRANDS 5T Single Acting Ram – 25mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 5,000kg
- Stroke: 25mm
- Effective Cylinder Area: 7.1cm2
- Oil Capacity: 17.8cm3
- Collapsed Height: 110mm
- Extended Height: 135mm
(0 reviews) -
Pancake Style Single Acting (ESL Series)TQB BRANDS 5T Single Acting Ram – Pancake Style – 6mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 5,000kg
- Stroke: 6mm
- Effective Cylinder Area: 7.1cm2
- Oil Capacity: 4cm3
- Collapsed Height: 33mm
- Extended Height: 39mm
(0 reviews) -
Hollow Cylinders Double Acting (EDH Series)TQB BRANDS 60T Double Acting Ram – Hollow Piston – 166mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 60,000kg
- Stroke: 166mm
- Max Cylinder Capacity: 60T Advance, 39T Retract
- Effective Cylinder Area: 87.4cm2 Advance, 56.2cm2 Retract
- Oil Capacity: 1451cm3 Advance, 891cm3 Retract
(0 reviews) -
Hollow Cylinders Double Acting (EDH Series)TQB BRANDS 60T Double Acting Ram – Hollow Piston – 89mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 60,000kg
- Stroke: 89mm
- Max Cylinder Capacity: 60T Advance, 39T Retract
- Effective Cylinder Area: 87.4cm2 Advance, 56.2cm2 Retract
- Oil Capacity: 778cm3 Advance, 481cm3 Retract
(0 reviews) -
Hollow Cylinders Single Acting (ESH Series)TQB BRANDS 60T Single Acting Ram – Hollow Piston – 76mm Stroke
Features
- Spring loaded ram return system, allowing controlled retraction of the ram.
- High strength alloy steel body is precision machined to reduce wear and features a baked enamel finish for durability and corrosion protection.
- Pumps have an automatic overload system to help prevent damage to cylinders, pumps and accessories.
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using Eagle Pro 3/8″ NPT and 1/4″ NPT fittings.
- Industrial strengthened seals prevent costly leaks.
- Hardened alloy steel guide ring eliminates over travel and provides support for off-centre loads without damaging the cylinder walls.
- Eagle Pro ram couplers fitted with dust covers minimising fluid contamination.
Specifications
- Cylinder Capacity @ 10,000psi (700 BAR): 60,000kg
- Stroke: 76mm
- Effective Cylinder Area: 87.4cm2
- Oil Capacity: 664cm3
- Collapsed Height: 247mm
- Extended Height: 322mm
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Adaptor Kit For Hydraulic Press
The Borum Hydraulic Press Adaptor Kit includes 8 different sized pins (mandrels) ranging from 2,000kg to 20,000kg capacity, a pin holder, a storage shelf along with a mounting kit, and a pin plate with the weight capacity shown for each pin. This very handy set of eight steel mandrels, adaptor and press plate expands the uses of your workshop press for a wider range of applications involving different sized work pieces.
Kit contains; (Mandrel Length x Diameter)
- 50mm x 10mm
- 60mm x 12mm
- 60mm x 16mm
- 85mm x 18mm
- 85mm x 20mm
- 85mm x 22mm
- 110mm x 25mm
- 110mm x 30mm
- Mountable storage rack
- Adaptor Spigot Diameter: 25mm
- Weight: 7.5kg
- Carton: 310 x 205 x 115mm
BPAK compatible with the following presses: BHSP20T, BHSP30T, 2048T, 2038T, 2036T, BSP100TA & BSP75TA.
Intended Use
Designed to use in conjunction with a hydraulic workshop press when straightening, bending and pressing any component that is difficult to handle.
(0 reviews) -
Oil Drainers & PumpsTQB BRANDS Air Regulator 7-130psi
This “TradeQuip Made for the Trade” air regulator provides accurate and reliable air pressure control for pneumatic systems and workshop applications. Constructed with a durable aluminium anodized finish body, it features a 40mm dual-scale pressure gauge displaying both PSI & MPa readings for easy pressure monitoring. With a pressure adjustment range of 7–130 PSI (0.05–0.9 MPa), and standard 1/4″ NPT inlet/outlet connections, it is ideal for maintaining consistent air supply to pneumatic tools and equipment. Supplied complete with a mounting bracket for convenient installation.
Features
- Aluminium anodized finished body
- Includes 40 mm pressure gauge with dual PSI/MPa scale.
- Includes mounting bracket
Specifications
- 1/4″ NPT inlet/outlet
- Pressure range: 0.05–0.9 MPa (7–130 PSI)
- MAX Inlet Pressure 140PSI
- Operating temperature: -5°C to 60°C
- Product Dimensions: 150mm(L) x 80mm(W) x 120mm(H)
- Packaging Dimension: 145mm (L) x 75mm(W) x 55mm(H)
- Net Weight: 0.17kg
- Gross Weight: 0.21kg
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 100,000kg
This “Borum Industrial” 100,000kg Air Hydraulic Workshop Press is designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding work requires high pressure hydraulics. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings.
“Borum Industrial” Air Hydraulic Workshop Presses are available in a variety of capacities and sizes. The press frames are designed for maximum strength, reliability and durability. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, “Borum Industrial” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Foot operated air trigger ram travel control
- 100mm pressure gauge
- Table winch system lowers or raises the bed
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- Extra tall working range for versatility
- Pair of bed plates included
Specifications
- Safe Working Capacity: 100,000kg
- Working Range: 113-813mm
- Overall Height: 1848mm
- Overall Width: 1250mm
- Overall Depth: 990mm
- Bed Width: 787mm
- Bed Surface Depth: 342mm
- Piston Ram Stroke: 300mm
- Ram Diameter: 140mm
- Width Between Side Posts: 268mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125psi
- Air Inlet: 1/4″NPT
- Nett Weight: 652kg
- Crate: 2044 x 1150 x 524mm
- Gross Weight: 762kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 30,000kg
This TQ Pro “Latest Technologies” 30,000kg Air Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This 30,000kg Air Hydraulic Workshop Press features a fast-pump core that allows the pressure head assembly to lower and make contact with the work piece more quickly than the slow-pump core. The ram cylinder glides across the width of the upper frame allowing off-centre pressing.
Includes a set of mandrill pressing attachments.
Features:
- Premium-grade steel built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
- Foot Operated air trigger ram travel control
- Bed winch with swivel handle
- Integrated overload protection valve keeps from overloading the system
- Extra-long handle included for easy pumping force
- Foot pedal for pneumatic operation
- Handy removable parts tray
- Includes a set of mandrill pressing attachments
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 25-850mm
- Overall Height: 1800mm
- Overall Width: 770mm
- Overall Depth: 505mm
- Bed Outside: 164mm
- Bed Inside: 148mm
- Bed Width: 600mm
- Clear Pressing Space: 167 x 280mm
- Ram Sideways Movement: 200mm
- Piston Ram Stroke: 145mm
- Screw Adjustment: 75mm
- Ram Diameter: 55mm
- Bed Height Settings: 6
- Nett Weight: 163kg
- Crate: 1750 x 840 x 320mm
- Gross Weight: 178kg
Intended Use
For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 45,000kg
This “TradeQuip “Made for the Trade” 45,000kg Air Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 826mm bed width and 195mm inside bed gap this press becomes one of the most diverse Workshop Press in the TradeQuip range. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear. A polished and chromed cylinder ram and piston is guided by top quality performance seals, wear rings and dust seals. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed. Featuring an integrated overload protection valve, the hydraulic system features an onboard extra long handle for easy manual pumping force when not in pneumatic mode. For maximum safety and ease of use this air hydraulic system has been equipped with a foot operated air trigger for ultimate versatility. This TradeQuip “Made for the Trade” Workshop Press also becomes more efficient the most with it’s smooth and safe hand winch for fast and easy press bed height adjustment and the double spring ram return for fast ram retraction. Designed with a superior quality oil filled dial gauge for accurate dual metric/tons pressure readings. (Previous models include product code/s; TQHP50A)
“TradeQuip “Made for the Trade” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “TradeQuip “Made for the Trade” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features:
- Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
- Foot operated air trigger ram travel control
- 100mm pressure gauge
- Polished pneumatic aluminium air motor with polyurethane double seal setup
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Includes hand winch for fast and easy press bed height adjustments
- Integrated overload protection valve keeps from overloading the system
- Double spring ram return for fast ram retraction
Specifications:
- Safe Working Capacity: 45,000kg
- Working Range: 159-859mm
- Overall Height: 1707mm
- Overall Width: 1420mm
- Overall Depth: 800mm
- Width Between Side Posts: 186mm
- Bed Surface Depth: 359mm
- Bed Inside: 195mm
- Bed Width: 826mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 90mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125 psi
- Nett Weight: 301kg
- Carton: 1900 x 1040 x 500mm
- Gross Weight: 340kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 50,000kg
This “TradeQuip “Made for the Trade” 50,000kg Air/Manual Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 713mm bed width and 210mm inside bed gap this press becomes one of the most diverse Workshop Presses in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
Features:
- Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
- Hand operated air trigger ram travel control
- 100mm pressure gauge
- Polished pneumatic aluminium air motor
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Double spring ram return for fast ram retraction
Specifications:
- Safe Working Capacity: 50,000kg
- Working Range: 137-837mm
- Overall Height: 1700mm
- Overall Width: 1290mm
- Overall Depth: 745mm
- Bed Outside: 356mm
- Bed Inside: 210mm
- Bed Width: 713mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 95mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125 psi
- Nett Weight: 271kg
- Carton: 1900 x 945 x 490mm
- Gross Weight: 305kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 50,000kg
This TQ Pro “Latest Technologies” 50,000kg Air Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This Top Quality 50,000kg Hydraulic Workshop Press features a fast-pump core that allows the pressure head assembly to lower and make contact with the work piece more quickly than the slow-pump core. The ram cylinder glides across the width of the upper frame allowing off-centre pressing. (Previous models include product code/s; BPROSP50T)
Includes a set of mandrill pressing attachments.
Features:
- Premium-grade steel built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
- Foot Operated air trigger ram travel control
- Bed winch with swivel handle
- Integrated overload protection valve keeps from overloading the system
- Extra-long handle included for easy pumping force
- Foot pedal for pneumatic operation
- Handy removable parts tray
- Includes a set of mandrill pressing attachments
Specifications:
- Safe Working Capacity: 50,000kg
- Working Range: 80-780mm
- Overall Height: 1900mm
- Overall Width: 930mm
- Overall Depth: 535mm
- Bed Inside: 200mm
- Bed Width: 750mm
- Clear Pressing Space: 224 x 280mm
- Ram Sideways Movement: 200mm
- Piston Ram Stroke: 145mm
- Screw Adjustment: 75mm
- Ram Diameter: 68mm
- Bed Height Settings: 6
- Nett Weight: 243kg
- Crate: 1900 x 1000 x 450mm
- Gross Weight: 258kg
Intended Use
For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 75,000kg
This “Borum Industrial” 75,000kg Air Hydraulic Workshop Press is designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding work requires high pressure hydraulics. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings.
“Borum Industrial” Air Hydraulic Workshop Presses are available in a variety of capacities and sizes. The press frames are designed for maximum strength, reliability and durability. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, “Borum Industrial” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! (Previous models include product code/s; 1242)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Foot operated air trigger ram travel control
- 100mm pressure gauge
- Table winch system lowers or raises the bed
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Extra tall working range for versatility
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 75,000kg
- Working Range: 170-884mm
- Overall Height: 1925mm
- Overall Width: 1340mm
- Overall Depth: 800mm
- Bed Width: 800mm
- Bed Surface Depth: 279mm
- Piston Ram Stroke: 250mm
- Ram Diameter: 125mm
- Width Between Side Posts: 217mm
- Bed Height Settings: 8
- Operating Air Pressure: 110-125psi
- Nett Weight: 451kg
- Crate: 2110 x 1100 x 430mm
- Gross Weight: 498kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Porta Powers & Panel RepairTQB BRANDS Air/Hydraulic Pump 10,000psi
This “TradeQuip Made for the Trade” hand or foot hydraulic air pump is designed to operate pneumatically. It is an ideal power source for various body, frame and alignment applications and can be used with different ram kits, shop presses and hydraulic pullers (not included) that operate with a hydraulic oil pressure requirement of up to 10,000 psi. Constructed for safety, durability and high-flow oil delivery, this air hydraulic pump will deliver high-quality performance in addition to fine metering capabilities that provide more precise control. This heavy duty TradeQuip Air-hydraulic Pump connects via a 1/4″ NPT air nipple and a 3/8″ NPT hydraulic hose adaptor.
Hydraulic hose and adaptor kit not included. Available separately use Product Code: EH-8206F
Features
- Durable light-weight corrosion-free aluminium
- Built-in overload system prevents pump from being used beyond its safety capacity
- Ergonomic hand/foot activation lever
- Air/oil filters minimise contaminants in hydraulic system
- Perfect for porta power rams and bead breakers
- Compact design fits in service truck storage boxes
- Air exhaust muffler for quiet operation
Specifications
- Maximum Output Pressure: 10,000psi
- Usable Hydraulic Fluid Capacity: 1.6 Litres
- Operating Air Pressure: 90-145 psi
- Air Consumption: 7.5CFM @ 100 psi
- Oil Delivery with No Load: 49.5 cu.in/min
- Oil Delivery with Load: 7.6 cu.in/min
- Input (Air) port thread: 1/4″ -18 NPT
- Output (Oil) port thread: 3/8″ -18 NPT
- Weight: 8kg
- Carton: 300 x 170 x 205mm
Hydraulic hose and adaptor kit not included – Available separately use Product Code: EH-8206F
Intended Use
For medium duty applications when compressed air is used in conjunction with a good quality manual hydraulic pump.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Manual Workshop Press 45,000kg
Dominate the most demanding workshop tasks with this eQuipt “Designed to Deliver” industrial-grade powerhouse of a press, designed to deliver massive pressing force with smooth, effortless precision. Featuring a versatile dual manual and air-powered hydraulic system, it offers the ultimate flexibility to switch between rapid positioning and controlled, high-capacity pressure. Built for durability and ease of use, the integrated bed winch and rugged, dirt-resistant finish ensure your shop stays productive and professional even under the heaviest workloads.
Features:
- Hydraulics are powered with a high quality oil
- 100mm pressure gauge
- Integrated overload protection valve keeps from overloading the system
- Lead-free paint finish is oil, grease and dirt-resistant for easy cleanup and to help prevent rust
- Bed winch for fast adjustment
Specifications:
- Safe working capacity: 45,000kg
- Working range: 144-984mm
- Operating Air Pressure: 110-125 psi
- Overall Dimensions (including Winch & Pump): 1320(L) x 745(D) x 1744(H) mm
- Bed Dimensions: 710(L) x 320(D) mm
- Working Bed Gap: 520mm x 162mm
- Press Spigot Diameter: 53mm
- Weight: 245kg
Intended Use
For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.
(0 reviews) -
Hand ToolsTQB BRANDS Bearing Race & Seal Driver Set – 10pce
This versatile “TradeQuip “Bearing Race & Seal Driver set includes everything you need to quickly and easily installs wheel bearing races and seals without damage to the bearing race or axle housing.
Features- 9 Common sizes
- Aluminium Construction
- Drive Extension Handle
- Blow Mould Carry Case
Specifications
- Sizes: 40, 44, 50, 59, 63, 65, 72, 76 and 81mm
Intended Use
For the installation of wheel bearing races and seals without damage to the bearing race or axle housing.
(0 reviews) -
Blasting EquipmentTQB BRANDS Blasting Cabinet 220Litre
The TradeQuip “Made for the Trade” 220Litre Blasting Cabinet is manufactured using heavy gauge steel. It includes a stand, hopper and acrylic protective screen. It comes with an internal low voltage fluorescent light, tempered glass screen with replacement shields and grip textured gloves to ensure a secure grasp on all objects. A wide side door opening and large viewing window make this blast cabinet ideal for cleaning automotive parts. This heavy duty blast cabinet is constructed of 19 gauge steel and comes equipped with sand blasting gun and four ceramic nozzles. The 3051 is a medium size unit that is fitted with dust extraction outlet ready to fit a workshop vacuum hose for dust extraction where applicable. (Previous models include product code/s; 3050)
Features
- Freestanding floor model
- Complete with gun and low voltage internal fluorescent light
- Tempered glass viewing window with protective shields
- Supplied with 4 ceramic nozzle tip sizes
- Cabinet fitted and ready to be used with a workshop vac as dust collection system
- Spare parts available in Australia
Specifications
- Capacity: 220 Litre
- Ceramic Nozzle Tip Sizes: 4, 5 ,6 and 7mm (1 of each)
- Maximum Media Capacity: 20kg
- Operating Air Pressure: 60 – 110psi
- Compressor Air Supply Requirement: 15-25CFM @ 80 psi (optimum delivery dependent on tip size)
- Tempered glass viewing window: 250 x525mm
- Door opening: Rear 425(H) / Front 240(H) x 515(W) mm
- Cabinet dimensions: Rear 590(H) / Front 380 (H) x 860(L) x 550(W) mm
- Dimensions: 1400(H) x 890(L) x 550(W) mm
- Nett Weight: 43kg
- Carton: 950 x 620 x 610mm
- Gross Weight: 48kg
- Not for use with soda or walnut shell
Intended Use
Blasting work utilising compressed air with recommended abrasive media and/or glass beads to clean and abrade a surface, typically metal, of any rust, paint or other unwanted surface materials.
Choosing the right abrasive media
Garnet
Garnet is one of the last few abrasives that are naturally mined. It is an industrial gemstone that creates a profile virtually free of embedment, which makes it excellent for coating adhesion, as well as applications where low or no transfer of grit into the substrate can be tolerated. Garnet is generally used when paint, rust, and scale have to be removed from steel, such as car/truck frames, tanks, heavy machinery, farm equipment, etc. Garnet is one of the most economical abrasive and is the best choice for large blast projects. Best uses: rust removal, heavy scale removal, paint and coatings removal on heavy-gauge steel.
Crushed Glass
Crushed Glass or Glass Beads would have to be one of the most popular forms of blast media and can be used on a variety of dustless blasting and abrasive blasting projects across all industry sectors. Using crushed glass means you know you are using a eco friendly and recycled product that helps the environment. If you’re looking to achieve a smooth, bright finish, glass beads can be your best option. Glass beads are also recyclable and can be used up to 100 times before replacement, making them an extremely cost-effective option. Glass bead media works well on soft metals like aluminium and brass as well as plastic. Works with a blasting gun or in a blast cabinet.
(0 reviews) -
Blasting EquipmentTQB BRANDS Blasting Cabinet 420Litre
The TradeQuip “Made for the Trade” 3036T Blasting Cabinet features a large gas-lift assisted front door for easy loading and unloading. It has excellent lighting and a very powerful vacuum system. The lower hopper stores the abrasive material for use and reuse and opens easily to allow easy removal of any media. Always ready to use when you are, the cabinet can be constantly connected to your air supply and is ready for immediate use when you step on the pedal.
The 3036T uses a foot pedal to control the flow of abrasives from the air nozzle. The foot pedal allows the operator to just “hold and point” the nozzle rather than the need to “pull a trigger” of other sandblast cabinets which can cause hand fatigue during prolonged use.
The 3036T incorporates a powerful vacuum dust extraction system that keeps the work area free of “floating” rust and used abrasive media particles. After the media particles “slams against” the surface to be cleaned, a portion of the bead is “destroyed” and becomes almost weightless. The vacuum system removes the “floating” rust particles and the “used up” media particle shells while the “good beads’ fall into the hopper below the work surface.
Use this blasting cabinet to remove scale or heavy rust from automotive parts, clean up rusty tools, etch glass, or any other special application.
(Previous models include product code/s; 3031)
Features
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- Large viewing window gives the operator a wide viewing area
- Oversized hinged top door opening allows the operator to easily load a wide variety of items into the blast cabinet
- Large inside work area allows the operator to easily maneuver bulky items inside the cabinet
- Hinged door on hopper allows for easy changing of the the abrasive
- Heavy-duty 14 gauge steel legs provide strength and a stable footprint
- Fluorescent light kit and 90CFM dust collector help the operator to maintain a good visual in heavy blasting operations
- Rear-mounted dust collector helps minimise floor space needed for operation
- Replaceable protective window and light underlay to protect and extend the life of the viewing window and light cover
- Foot-pedal-controlled siphon blast gun helps to reduce operator hand fatigue
- Ideal for blasting engine parts, wheels, gearboxes etc
- Grate capacity of 70kg allows the operator to blast heavier items such as cylinder heads
NOTE: “Not for use with soda or walnut shell”
Specifications
- Cabinet Capacity: 420 Litres
- 4 Ceramic Nozzles: 2x6mm, 2x7mm
- Maximum Media Capacity: 70kg
- Maximum Air Pressure: 125psi
- Required Air Supply: 15-25CFM
- Sand Blasting efficiency: 100cm²/min
- Optimum Operating Pressure 60-110psi
- Height: 1680mm
- Depth: 940mm (including the dust extractor)
- Width: 1180mm
- Floor to the top of fully open door: 1800mm
- Internal Dimensions: 1150 x 570 x 540mm
- Nett Weight: 120kg
- Carton: 1270 x 1250 x 760mm
- Gross Weight: 157kg
Intended Use
Blasting work utilising compressed air with recommended abrasive media and/or glass beads to clean and abrade a surface, typically metal, of any rust, paint or other unwanted surface materials.
Choosing the right abrasive media
Garnet
Garnet is one of the last few abrasives that are naturally mined. It is an industrial gemstone that creates a profile virtually free of embedment, which makes it excellent for coating adhesion, as well as applications where low or no transfer of grit into the substrate can be tolerated. Garnet is generally used when paint, rust, and scale have to be removed from steel, such as car/truck frames, tanks, heavy machinery, farm equipment, etc. Garnet is one of the most economical abrasive and is the best choice for large blast projects. Best uses: rust removal, heavy scale removal, paint and coatings removal on heavy-gauge steel.
Crushed Glass
Crushed Glass or Glass Beads would have to be one of the most popular forms of blast media and can be used on a variety of dustless blasting and abrasive blasting projects across all industry sectors. Using crushed glass means you know you are using a eco friendly and recycled product that helps the environment. If you’re looking to achieve a smooth, bright finish, glass beads can be your best option. Glass beads are also recyclable and can be used up to 100 times before replacement, making them an extremely cost-effective option. Glass bead media works well on soft metals like aluminium and brass as well as plastic. Works with a blasting gun or in a blast cabinet.
(0 reviews) -
Blasting EquipmentTQB BRANDS Blasting Hood
Protect eyes and face from “rebounding” abrasive particles by wearing our TradeQuip “Made for the Trade” Abrasive Blasting Hood. Work safe and sound inside this rugged, comfortable, sandblasting hood that’s ideal for many abrasive-blasting applications.
Features
- Durable fabric and synthetic-leather construction
- Large 110mm x 55mm acrylic viewing plate
- Adjustable internal helmet for added comfort
- Reinforced side ventilation panels for increased airflow
- NOT for respiratory protection
Health and Safety Warning
Abrasive Blasting emits abrasive particles under pressure. Blast hoods are designed to protect the eyes and face of user from abrasive particles.
Abrasive Blasting Hoods do not protect the operator from the dust. Adequate respiratory mask, eye and body protection must be worn during use. Inhalation of silica particles can cause cancer and other deadly diseases. Always wear appropriate Aust Standards approved respiratory protection when using abrasive-blasting equipment.
NOTE: We recommend the use of personal protective equipment. Always wear a respiratory filter or mask over your mouth when operating this unit. You will create a cloud of abrasive media material and debris which should not be inhaled.
(0 reviews) -
Wheel, Dollies & SuspensionTQB BRANDS Combi Portable Bead Breaker 5000kg
This Borum Industrial Hydraulic Bead Breaker delivers 5,000kg of force in seconds and is designed to work on most truck and tractor rims up to 26″. Ideal for use with all trucks, tractors, graders, harvester and skidder tyres, it suits all types of rims except 5-piece earthmover rims. It is expressly intended to be used as an aid in breaking the bead seal between a tyre and it’s one, two or three piece wheel rim for the purpose of reseating a bead seal, replacement of tyre or wheel and replacing tyre valves, tyre tubes etc. This Borum Industrial Hydraulic Bead Breaker can perform tyre work or tyre replacements without ever removing the wheel from the vehicle. This quality unit is excellent for field maintenance use on agricultural machines.
The bead breaker works directly on the bead of the tyre and will not damage the tyre if used correctly when used with the optional TradeQuip 2054T 10,000 psi air/hydraulic pump and the Eagle Pro EH-8206F Hydraulic Hose With Coupler.
Features
- Economical solution for agricultural wheels and 1, 2 and 3piece truck tyre rims
- Hydraulically clamps on wheel
- Durable steel construction
- Clamps to wheel rim & breaks bead simply with up to 5,000kg of force
- Requires 10,000psi air/hydraulic pump (sold separately)
- Most popular tool for breaking beads on most agricultural tyres
Specifications
- Safe Working Capacity: 5,000kg
- Rated Pressure: 10,000psi
- Maximum Rim Diameter: 660mm (26″)
- Maximum Rim Width: 125mm (5″)
- Ram Stroke: 90mm
- Pressure Connection: 3/8″ – 18NPTF
- Hydraulic Oil Capacity: 250ml
- Dimensions: 429x140x324mm
- Weight: 16kg
- Carton: 375x375x155mm
Intended Use
Designed to be used as an aid in breaking the bead seal between a tyre and it’s one, two or three piece wheel rim for the purpose of reseating a bead seal, replacement of tyre or wheel and replacing tyre valves, tyre tubes etc.
(0 reviews) -
Vices & AnvilsTQB BRANDS Commercial Bench Vice Swivel with Anvil 150mm
Borum Industrial Bench Vices are made with a high quality ductile cast iron body built for rugged use and extended life. Each has the capability of handling pipe as well as mounting to the bench with 3 mounting posts providing more stability and secure hold. Constructed of ductile iron, the Borum Industrial Bench Vice with anvil has a precision cast body with a swivel base, the vice can be rotated 360° to offer flexibility. Whether used for cutting, screwing, drilling, planing, sanding, or just holding, this Borum Industrial Bench Vice is perfect for any type of industrial holding application. The Borum 150mm Industrial Bench Vice is a precision-manufactured, hefty brute with robust design features that make it more user friendly and efficient in an industrial workshop environment. Both the high quality ductile cast iron steel and durability-inducing drop forging process ensures that the Borum 150mm Industrial Bench Vice will continue to perform like new for a many years.
(Previous models include product code/s; 7416S)
Features
- High quality ductile cast iron body built for rugged use and extended life
- Replaceable serrated top jaws
- 360° swivel base with double lockdown for quick and easy positioning
- Designed for general duty applications
- Built in pipe jaws handle various pipe sizes
- Large anvil work surface
- Lead-free paint finish ensures long-lasting wear and helps prevent rust.
- Oil, grease and dirt-resistant finish for easy cleanup.
Specifications
- Jaw Width: 150mm
- Jaw Opening: 150mm
- Throat Depth: 105mm
- Anvil Size: 90x105mm
- Mounting Base: 4Holes – 15mm dia – 160mm apart
- Net Weight: 25kg
(0 reviews) -
Vices & AnvilsTQB BRANDS Commercial Bench Vice Swivel with Anvil 200mm
Borum Industrial Bench Vices are made with a high quality ductile cast iron body built for rugged use and extended life. Each has the capability of handling pipe as well as mounting to the bench with 3 mounting posts providing more stability and secure hold. Constructed of ductile iron, the Borum Industrial Bench Vice with anvil has a precision cast body with a swivel base, the vice can be rotated 360° to offer flexibility. Whether used for cutting, screwing, drilling, planing, sanding, or just holding, this Borum Industrial Bench Vice is perfect for any type of industrial holding application. The Borum Industrial 200mm Bench Vice is a precision-manufactured, hefty brute with robust design features that make it more user friendly and efficient in an industrial workshop environment. Both the high quality ductile cast iron steel and durability-inducing drop forging process ensures that the Borum Industrial 200mm Bench Vice will continue to perform like new for a many years. (Previous models include product code/s; 7418S)
Features
- High quality ductile cast iron body built for rugged use and extended life
- Replaceable serrated top jaws
- 360° swivel base with double lockdown for quick and easy positioning
- Designed for general duty applications
- Built in pipe jaws handle various pipe sizes
- Large anvil work surface
- Lead-free paint finish ensures long-lasting wear and helps prevent rust
- Oil, grease and dirt-resistant finish for easy cleanup
Specifications
- Jaw Width: 200mm
- Jaw Opening: 200mm
- Throat Depth: 115mm
- Anvil Size: 100x113mm
- Mounting Base: 4Holes – 15mm dia – 160mm apart
- Net Weight: 30kg
(0 reviews)