Height Safety
Showing 145–180 of 190 results
-
Descenders & Rescue DevicesSKYLOTEC Up You Go
Auto-locking haul system with 4:1 mechanical advantage – or 5:1 if used upside down – ideal for use in rescue operations. Developed for lifting and releasing an injured operator or for tensioning a system.
Main features:
- CE-marked and tested with a load of 18 kN for 3 minutes;
- extremely compact system, ideal where space for manoeuvring is limited;
- it prevents the load from slipping back once has been retrieved, making hauling operations smoother and faster;
- comprised of UP ROLL and UP LOCK pulleys, equipped with sheaves mounted on ball bearings;
- it comes with a closable pouch to reduce bulk during transport;
- drawstring closure that further expedites setting up the equipment;
- equipped with rope guide (patent pending), installed on the lower pulley, that keeps rope strands parallel and reduces the risk of tangling while in use;
- locking and unlocking of the cam with a single hand movement, even with gloves on, via the freelock system;
- supplied with two oval OVX TG carabiners with triplex gate and anti-rotation elements;
- equipped with an 8 mm EN 564 accessory cord.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AccessoriesSKYLOTEC Visix
This optimally shaped transparent all-purpose half visor protects the face from impacts and flying parts. The unique sealing lip prevents even the smallest particles from entering. It is made of polycarbonate with high impact protection. VISIX can be easily and quickly attached to the Gear Rack of any INCEPTOR GRX helmet without additional tools. When working, the visor can be flexibly adjusted to be worn lowered, at half height or upwards. It also provides exterior protection against scratches as well as fog protection from the inside. – Molded polycarbonate visor with high impact protection – Versatile, easy to fit – Compatible with all INCEPTOR GRX helmets
(0 reviews) -
HarnessesSKYLOTEC Work Tec 140+ Wasit Tec
Ergonomic four-point harness consisting of the Work Tec 140 and Waist Tec models.
Developed for work in restraint, positioning and for use in fall arrest systems.Main features:
- sternal attachment point made of light alloy and dorsal attachment point made of stainless steel;
- innovative Easy-ring sternal closure system which is very robust, intuitive and easy to open even when wearing gloves;
- EN 358 lateral attachment points in two positions: in case of usage (work mode) they are turned externally from the waist belt for the connection of a positioning lanyard, in case it is not used (stand-by mode) they fold inwards so it does not interfere the operator’s movements;
- rear attachment points designed for the connection of a restraint lanyard;
- padded profiled shoulder straps so as to avoid undue friction on the operator’s neck;
- dorsal support made from breathable mesh for optimal comfort when in suspension;
- two horizontal straps positioned on the shoulder straps and exclusively intended for the insertion of HOOK REST support;
- two additional gear loops on the waist belt;
- leg loops equipped with quick release buckles that have an indicator for correct insertion;
- work load limit: 140 kg.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HarnessesSKYLOTEC Xarrier
Ergonomic and lightweight seat harness equipped with two lateral attachment points in webbing, a ventral attachment point in light alloy and a rear in webbing. When used in conjunction with TOP X or TOP Y chest harnesses, combines to form a full-body harness (EN 361) with five attachment points, an excellent choice for rope access workers who seek comfort without compromising on weight.
Main features:
- close-fitting and lightweight construction with breathable mesh padding for optimal comfort;
- leg-loops designed with targeted panel construction to ensure optimal comfort while in suspension by relieving pressure in the groin area;
- different-coloured signs for immediate verification of matching between corresponding sides in waistbelt and leg loops (green = right side; red = left side);
- adjustable rear elastic straps that allow the leg loops to be moved along the legs;
- webbing EN 358 lateral attachment points, identified by an orange element;
- wide attachment point on the rear of the waistbelt, marked by the letter R and exclusively intended for the connection of a restraint lanyard;
- rear buckle for TOP Y chest harness installation;
- two dedicated loops for the connection of a work-positioning seat;
- four large gear-loops, two loops for the tool-holder pouch and two slots for carrying-tools carabiners;
- maximum load: 140 kg.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Trilock CarabinersSKYLOTEC XL-D TG
Light-alloy hot-forged connector with large capacity base and triplex gate, ideal for the connection of multiple devices.
Main features:
- enhanced H-profile, for excellent weight-to-strength ratio;
- wide gate opening and large internal capacity;
- equipped with catch-free closure for effortless clipping;
- compatible with FIX PRO+ positioning device.
(0 reviews) -
Diagnostic ToolsSP TOOLS Adjustable Advance Timing Light
- Quickly tune-up cars, trucks, marine and recreational vehicles
- Works on conventional, electronic and computer controlled ignition systems on both adjustable and nonadjustable timing systems
- Patented Skip circuitry – Tests up to 10,000RPM
- Dial type timing advance (0˚- 60˚ score)
- Heat resistant metal inductive pick-up
- One handed operation
- Detachable leads for easy replacement and use
- Protective hand guard for added safety
- Rotating barrel for better aim at timing mark
- Easy access slim-line barrel
- Optical correct lens
(0 reviews) -
Diagnostic ToolsSP TOOLS CAN OBDII/EOBD Scanner Code Reader
- Designed to work with OBDII compliant vehicles including next generation protocol, Control Area Network (CAN). Operation relies on access being provided by the vehicle manufacturer, for which legislation was introduced in Australia & NZ 2006, USA – 1996, Europe (petrol) 2001, Europe (diesel) 2004.
Note: This model is not compatible with Japanese manufactured vehicles using JOBD protocol. - Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Supports multiple trouble code requests: Generic codes, pending codes and manufacturer specific codes
- Code definitions are displayed on unit screen
- Reviews the emission readiness status of OBDII Monitors
- Determines malfunction indicator lamp (MIL) status
- Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that supports Mode 9
- Reviews the live data on unit screen
- Easy to use with one plug in, highly reliable and accurate
- Stand-alone unit with no need for an additional laptop/computer to operate
- Small in size and comfortably fits in the palm of your hand
- Unit updates via internet by USB cable
- Software CD with over 10,000 DTC definitions included
- No batteries needed as the unit is powered via OBD2 cable
(0 reviews) - Designed to work with OBDII compliant vehicles including next generation protocol, Control Area Network (CAN). Operation relies on access being provided by the vehicle manufacturer, for which legislation was introduced in Australia & NZ 2006, USA – 1996, Europe (petrol) 2001, Europe (diesel) 2004.
-
Diagnostic ToolsSP TOOLS CAN OBDII/EOBD/JOBD Scanner Code Reader
- Works with all 1996 and newer vehicles that are JOBD/OBDII/EOBD compliant
(Including the CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000 protocols) - Compliant with OBDII 16 PIN Toyota, Honda, Daihatsu, Mitsubishi, Mazda, Nissan, Suzuki & Subaru
- Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Wider vehicle coverage with CAN protocol support
- Supports multiple trouble code requests: Generic codes, pending codes and manufacturer specific codes
- Code definitions are displayed on unit screen
- Reviews the emission readiness status of OBDII Monitors
- Determines malfunction indicator lamp (MIL) status
- Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that supports Mode 9
- Reviews the live data on unit screen. • Review live data graph with four items in one screen
- Stand-alone unit with no need for an additional laptop or computer to operate
- Small in size and comfortably fits in the palm of your hand
- Unit updates via internet by USB cable
- Software CD with over 10,000 DTC definitions included
- No batteries needed as the unit is powered via OBD2 cable
- 2.8” TFT colour screen displays more information on screen
(0 reviews) - Works with all 1996 and newer vehicles that are JOBD/OBDII/EOBD compliant
-
Diagnostic ToolsSP TOOLS Diagnostic Pump Kit – Dual Mode 2 Way Quick Switch
- High quality diagnostic tool
- 2-Way pressure and vacuum test functions
- Patented design – Intuitive rotary dial mode switch – Pistol grip with lever
- High volume efficiency in both pressure and vacuum modes
- Manufactured from reinforced composite materials – Very high strength – High impact resistance – Excellent chemical resistance
- Integrated rear mount gauge – Optimum viewing angle – Maximum impact protection
- High quality silicon material hoses with quick couple hose fittings – Quick hose interchange – No leaks under vacuum or pressure
- Custom blow mold storage case
DUAL MODE PRESSURE AND VACUUM FUNCTIONS:
Pressure Mode: - Monitor turbo charger boost pressure
- Test and adjust turbo charger waste gate actuators
- Test pressure operated central locking systems
- Test fuel tank vent valves
- Test one way valves
- Diagnose small engine faults
Vacuum Mode: - Test EGR valve
- Test fuel pressure regulator
- Test map sensor
- Test thermal vacuum switches
- Test electric vacuum switches
- Test one way valves
- Test HVAC valves
- Test automatic transmission modulator valve
- Test central locking systems
(0 reviews) -
Diagnostic ToolsSP TOOLS Digital Automotive Multimeter
- Set includes: Test Leads , K-type Temperature Probe, Inductive Pick-up, 9v Battery & Canvas Bag
- RPM measurement for 2–10 cylinder automotive engines using the inductive pick-up
- Oversized high contrast 9999 count LCD display with backlight
- 14 functions including DC/AC voltage, DC/AC current (max 20A), resistance, RPM (tach), dwell angle, duty cycle frequency, MS-pulse, temperature (ºC/ºF), capacitance, continuity & diode check
- Read pulse duty cycle & dwell angle for electronic fuel injection feedback carburettors and ignition
- Fused current inputs & overload protection on all ranges
- Measure milliseconds pulse width to test on-time of fuel injectors, idle air control motors & electronic transmission controls
- Data hold and relative functions
- Auto power off
- Auto ranging
- Back light
- Safety design cat 3 & cat 4
(0 reviews) -
Diagnostic ToolsSP TOOLS Digital Insulation Tester
Uses a high voltage, low current DC charge to measure the resistance within wires and motor windings to identify current leakage and faulty or damaged insulation
FEATURES
- Test voltage ranges: 125V, 250V, 500V, 1000V
- Measures: Voltage up to 1000V DC, 750V AC and resistance up to 4000MΩ
- Min/Max record mode
- Live circuit detection prevents insulation tests if voltage >30V
- Auto null of test lead resistance
- 1mA output current on insulation test
- 200mA short circuit on continuity range
- Large digital LCD dual display with backlight
- Rugged design for heavy duty use
- Lock down test button for hands free use
- Auto power off
- Hold function
- CAT III 1000V
(0 reviews) -
Diagnostic ToolsSP TOOLS Digital Multimeter – Deluxe Automotive – 0.8 to 100V
FEATURES
- Measures DC/AC voltage, DC/AC current (max 10A), resistance, capacitance, frequency (electrial & electronic), continuity & diode check
- True-RMS measurements
- Large 6000 count digital LCD display with backlight
- Rugged design for heavy duty use
- Auto power off
- Auto ranging
- Hold function
- Includes probe test leads
- Cat III 1000V
SPECIFICATIONS
- DC voltage detection: 2V / 20V / 100V
- Resistance detection: 2000 Ω / 20K Ω / 200K Ω / 2M Ω / 20M Ω
- On-off detection: 2000 Ω / beep less than 50 Ω
(0 reviews) -
Diagnostic ToolsSP TOOLS Digital Multimeter with Temperature Gauge – Pocket Size
- 2000 counts digital display
- Safety Design Cat 3 600v
- Non-contact ACV detection
- Data hold
- Auto ranging
- Type K temperature input
- Continuity, diode test, resistance
- Auto power off with low battery indicator
- Pocket sized
(0 reviews) -
Diagnostic ToolsSP TOOLS Electrical Digital Multimeter
- Back Light
- Data Hold
- Buzzer
- AC/DC Voltage
- DC Current
- Resistance
- Diode Test
- Temperature Continuity
- Transistor Test
- 1999 Counts digital display
- Safety design cat 2
(0 reviews) -
Diagnostic ToolsSP TOOLS Infrared Laser Guided Thermometer
- Dual laser technology (twin dots)
- Rapid detection function
- Automatic data hold
- OC/OF switch
- Emissivity digitally adjustable from 0.10 to 1.0
- Max temperature display
- -50°C/550°C range (-58°F/1022°F)
- Backlight LCD displays resolution 0.1°C(0.1°F)
- Set high & low alarms
* NOTE: NOT SAFE FOR USE ON HUMANS OR ANIMALS
(0 reviews) -
Diagnostic ToolsSP TOOLS Laser Actuated Tachometer
- Non contact measurement of RPM
- RPM range 2.5–99,999
- Instant and total RPM function
- Memory function
- 50mm–2000mm range with reflective tape
- Accuracy +/- 0.05%
(0 reviews) -
Diagnostic ToolsSP TOOLS Mechanics Stethoscope
- High grade instrument made from quality materials
- Metal ear piece and thick flexible tubing
- Quality diaphragm assembly
- Assists in locating abnormal mechanical sounds within a component
- Ensures targeted sounds are transmitted clearly
- Minimises phantom and background noises
- A probe length of 285mm and tube length of 600mm
- Extra reach when working in confined areas
- An essential diagnostic tool for fault finding in vehicle engines and engine bays,under-body, transmissions, differentials & bearings
(0 reviews) -
Diagnostic ToolsSP TOOLS Mini-Infrared Thermometer
- LCD display with backlight
- Single dot laser targeting
- Low battery indication
- Auto power off
- -20°C / 270°C Range (-4° F – 518°F)
* NOTE: NOT SAFE FOR USE ON HUMANS OR ANIMALS
(0 reviews) -
Diagnostic ToolsSP TOOLS Multi-Function Smart Tool with Wifi & Built-In Printer – 5 Tools in 1
SMART AUTOMOTIVE TESTING
The SP Smart Tool is a multi-function Android tablet based scan tool with an easy to use and understand user interface, capable of running sophisticated whole system diagnosis on more than 100 car brands throughout Europe, America, Asia and China and offers support to more than 20 common maintenance special functions, CAN FD, DoIP and various diagnosis protocols. Combining multiple professional tools into one, this SP Smart Tool is an essential tool for any modern professional workshop. The built-in printer allows technicians to print out hard copies of test reports on the go and the massive 64GB of on-board storage allows users to save test reports for later viewing and comparison.
5 TOOLS IN 1
BATTERY ANALYSER
- Two test modes – Out-of-car Inspection and In-car Inspection
- Analyses battery health and calculates the actual cold starting ability of the battery
- Battery bar code scanning for rapid test setup
- Battery matching enables you to perform a resetting operation on the monitoring unit of the vehicle’s battery, in which the original low battery fault information will be cleared and battery matching will be done
- Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIn & IEC standards
- Built-in printing functionality provides instant hard copy test results
TPMS TESTER (Tyre Pressure Monitoring System)
- Provides the ability to activate most OEM/Universal TPMS sensors, reprogram sensor IDs, retrieve/clear TPMS DTCs and relearn sensors, helping technicians quickly find out faulty TPMS and turn off MILs
- Ultra wide coverage – Covers more than 98% of vehicles with the Tyre Pressure Monitoring System
- Supports 315MHz/433MHz tyre pressure sensor activation and matching learning
- Reads tyre pressure data, including pressure, tyre temperature, battery status and more
- Can read/copy/write sensor ID value.
DIAGNOSTICS TESTER
- Connects via DLC (Data Link Connector) and quickly accesses all the electronic control units of the vehicle and generates a detailed report about vehicle health
- Compare pre- and post- repair reports and easily identify which DTC’s are cleared and which remain unfixed
- Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Identifies which systems are installed on the vehicle
- Views and captures (records) real-time Live Data and saves the data in text format
- 3 Types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way – Text in list format, waveform graphs or in a merged graph for easy data comparison
- Update vehicle diagnostic software and APK
- Able to record diagnostic data that can serve as valuable information to help you in troubleshooting vehicle problems
- Able to run actuation test to access vehicle-specific subsystem and component tests
VEHICLE MAINTENANCE
This module provides an easy dial to quickly access the most commonly performed service functions as follows:
- Oil Reset Service
- Electronic Parking Brake Reset
- Steering Angle Calibration
- ABS Bleeding
- Gear Learning
- IMMO Service
- Injector Coding
- TPMS (Tyre Pressure Monitor System) Reset
- Battery Maintenance System (BMS) Reset
- Diesel Particulate Filter (DPF) Regeneration
- Electronic Throttle Position Reset
- AFS (Adaptive Front-lighting System) Reset
- AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- Gearbox Matching
- Sunroof Initialisation
- Suspension Calibration
- EGR Adaption
- Windows Calibration
- Seats Calibration
- Tyre Reset
- Language Change
- A/F Reset
- Coolant Bleed
- Transport Mode
- NOx Sensor Reset
- Stop/Start Reset
VIDEOSCOPE SUPPORT
(Available as an attachment – SP61173*)
With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly
KIT INCLUDES
-
- SP Smart Tool
- Diagnostic cable – DLC
- Battery cable clamps
- USB Type-C cable
- 12v auxiliary power outlet cable
- OBD I adaptor box
- Non-16pin adaptor cable kit
All Housed in a heavy duty Blow Mold Case
SPECIFICATIONS
- Operating system: Android 10
- Memory: 4GB
- Storage: 64GB
- Screen: 5.99” Capacitive touch screen
- Resolution:720 x 1440 pixels
- Camera: Rear-facing 8.0MP camera
- Wi-Fi: 2.4GHz/5GHz dual band
- Battery: 4500mAh/7.6v
- Working temperature: 0 to 45°c
- Storage temperature: -10 to 60°c
CONNECTIVITY
- DB15 Diagnostic connector
- USB Type A port x 1 + USB Type C port
- Circular connector for battery tester clamps
- OBD-II, OBD-I (Includes adaptor cables)
- Wi-fi internet connection
(0 reviews) -
Diagnostic ToolsSP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe
SET INCLUDES:
- Alligator Clip Test Lead Set
- Standard Probe Test Lead Set
- Suits all SP Multimeters
ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG
- Insulated finger guarded alligator clips for easy application
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
STANDARD PROBE TEST LEAD SET TO BANANA PLUG
- Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
(0 reviews) -
Diagnostic ToolsSP TOOLS Non-Contact Digital Tachometer
- LCD display with backlight
- Laser target
- Range: 100-30000rpm,1.7-500rps
- Accuracy: +/-0.1% reading (100.0 -9,999rpm), +/-0.02% reading (10,000 -30,000rpm)
- Auto power off
- 1.5V x 3 AAA batteries
- Protective cover and carrying case
(0 reviews) -
Diagnostic ToolsSP TOOLS Professional Timing Light
- 4 function digital display readout and easy to read backlit LCD
- Heavy duty inductive pick-up and clamps
- One handed operation
- Detachable leads for easy replacement and use
- Protective hand guard for added safety
- Rotating barrel for better aim at timing mark and LCD viewing angle
- Patented Skip circuitry – Tests up to 10,000 RPM
- Easy access slim-line barrel
- Optical correct lens
- Shock resistant boots
- Tachometer: 249 to 9,990 RPM (+/-1% accuracy)
- Advance degrees (2 and 4 cycle DIS and conventional): 0º to 90º (+/- 5º accuracy)
- Dwell: 0º to 180º /2-12 cylinders (+/-1% accuracy)
- Voltage: 10 to 16 volts DC (+/- 1% accuracy)
(0 reviews) -
Diagnostic ToolsSP TOOLS Videoscope – Smart Tool Attachment – Suits SP61170
TURN YOUR SP SMART TOOL INTO A VIDEOSCOPE
With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly.
FEATURES
- Dimmable front & Side Camera Lights
- Camera Diameter: 5.5mm
- View Angle: 60°
- Resolution: 1280x720Frame Rate: 30fps
- Flexible Camera Tube Length: 1m
(0 reviews) -
AccessoriesSYKES-PICKAVANT Infrared Laser Tachometer
- Non-contact Infra-Red Laser Tachometer for measuring RPM on rotating shafts, pulleys, wheels etc.
- Infra-red laser picks up signal from reflective tape which is placed on the rotating shaft
- Features bright and powerful laser optical system for easy targeting of rotating object, even in bright daylight
- Measurements can be obtained from safe and comfortable distances from 5 to 50cm
- The large 5 digits display allows measurements without the need to switch scales or multiply reading ranges
- Unit comes complete with batteries and reflective tape in a soft carrying pouch
(0 reviews) -
AccessoriesSYKES-PICKAVANT Infrared Thermometer
- High precision non-contact thermometer
- Features a unique dual laser beam system which accurately pinpoints the targeted area, ensuring optimum distance from the object for precise temperature measurement
- Ideal for automotive or industrial applications such as air conditioning and heating systems, cooling systems, and exhaust systems
- Automatic data hold and display resolution
- High and low temperature alarm setting
(0 reviews) -
AccessoriesSYKES-PICKAVANT Sonoscope
- A sensitive sound detector with a built-in diaphragm which amplifies noise to assist in the diagnosis of vehicle concerns such as noisy water pumps, wheel bearings, and other driven auxiliaries
- Robust metal and plastic construction
- Hose Length: 550mm
- Probe Length: 290mm
(0 reviews) -
HarnessesSKYLOTEC Ignite Nucleon Harness
This full-featured fall arrest and restraint harness with skid plate and arrester eyelet was developed specifically for wind energy, but it is also used in many other fields such as telecoms, power and construction where the highest standards of safety and functionality apply. IGNITE NUCLEON scores with a breathable hip pad that distributes the load evenly on the hip and is protected against abrasion from the outside with a protective sliding plate. The correct position of the sternal and dorsal fall arrest eyelet can be perfectly adjusted to the user. Leg pads are interchangeable if required. An integrated fall indicator and innovative stainless steel OKTALOCK buckles provide additional safety. Excess webbing is no longer a nuisance thanks to practical webbing fixation. The material loops and tool eyelets are used to accommodate tools.
- Lightweight and comfortable to wear.
- Sliding plate against abrasion.
- Breathable hip pads.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HarnessesSKYLOTEC Ignite Proton Wind Harness
The IGNITE PROTON WIND features all the same attributes as the PROTON but with the following additions to this already‚ state of the art harness:
· Synthetic rear protection plate on the rear of the AIRPAD waist belt. Provides protection to the AIRPAD in the tight confines of a wind turbine ladder or even general work at height applications.
· Chest eyelet for belay, but also for rescue
· Alloy Dorsal & Sternal attachment points
· Alloy Limited Fall Arrest attachment point on the centre front of the waist belt.
· Adjustable Confined Space loops
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Height SafetyLINQ Harness Elite Riggers – Standard (M-L)
- Code H301
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- Liqui-Pel Technology for liquid protection, also easier to clean the harness
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use
- Padded Legs for force dispersion at moment of fall impact
- Confined Space Rescue Loops
- Quick Release Buckles. Padding under buckles
- Service Pouch on back
(0 reviews) -
Height SafetyLINQ Elite Single Leg Elasticated Lanyard with Hardware
- WLE1- Single Leg Elasticated Lanyard + hardware (see list below)
- An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 160kg including tools and equipment.
- Drop forged lanyard hardware
- Stitching patterns are sewn by computer controlled bar tacking machinery for precision using UV resistant high tenacity polyester yarn with 100 newton (10kg) breaking strength.
- Unique THETA stitch pattern has 423 stitches resulting in a strength that matches the lanyards webbing strength.
- Unique stretchable lanyard design that minimises length of lanyard, preventing tripping or snagging.
- Australian designed, engineered, and made.
- Webbing Tenacity= 23kN.
- Webbing is UV rated to meet AS/NZS 1891.1 standard
- THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly.
- BSI Certified and approved to AS/NZS 1891.1
- SN – Snap Hook x2
(0 reviews) -
Climbing HelmetsPRO CHOICE Hard Hat Vented Micro Peak Ratchet Harness
- Code HHV6MP
- Lightweight, durable ABS shell
- 6 air vents for increased air circulation & comfort
- 10mm micro peak for increased vision whilst working at heights
- 6 point ratchet harness
- Fully adjustable 4 point chinstrap
- 6 point webbed harness for added comfort
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Height SafetyLINQ Karabiner Double Action Steel Alloy 19mm
- Code KDASA19
- Opening: 19mm
- Weight: 175gm
- Rating: 25kN
(0 reviews) -
Height SafetyLINQ Karabiner Triple Action Steel Alloy 26mm
- Code KTASA26
- Opening: 26mm
- Weight: 275gm
- Rating: 30kN
- Width: 82mm
- Length: 123mm
(0 reviews) -
Height SafetyLINQ Anchor Tetha T-Bar
- Code HSTBA
- The LINQ Tetha T Bar anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Suitable for Fall Arrest application on metal roofs.
- To be used on metal clad roofs only
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
Height SafetyLINQ Anchor Tetha V-Bar Straight 280mm
- Code HSTBS280
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 280mm size all purpose metal roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
Height SafetyLINQ Anchor Tetha V-Bar Straight 500mm
- Code HSTBS500
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 500mm used for Trimdeck or Custom Orb roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews)
