INDUSTRIAL TOOLS & MACHINERY
Showing 109–144 of 306 results
-
Punches & Punch SetsITM Groz Roll Pin Punches
Single piece construction with hexagonal shank imparts additional durability. Body has a premium powder coated finish with chamfered striking end that helps reduce mushrooming & chipping.
The heat-treated point has a rounded ball to centre the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal and eliminating any damage to the pin or wall.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Screw Cutting Gauge
Manufactured from hardened and polished stainless steel, all gauge surfaces are accurately ground.
It is most useful for checking tool angle while cutting threads in metal turning lathes. The angle on the thread cutting tool is checked on the V slots in the gauge.
Relief at the end of each slot enables proper seating of the cutting tool in the slot thus ensuring correct angle.
The gauge clearly indicates 55° for Whitworth and BSF Threads; 47-1/2° for BA Threads, 60° for Metric and American National Threads and 14-1/2° for Acme threads.(0 reviews) -
Gauges & IndicatorsITM Groz Sheet Metal & Wire Gauge
Made from heavy gauge hardened stainless steel.
Designed for measuring steel wire, hot & cold rolled steel sheet etc & check sizes from 0 to 36 gauge.
The gauge has metric dimensions marked on one side and gauge markings on the other.
Accuracy : within 100 microns.(0 reviews) -
Gauges & IndicatorsITM Groz Universal Surface Gauge
A basic tool for machinists and toolmakers, the Universal Surface Gauge is used for accurately scribing lines, transferring measurements or probing surfaces in inspection work.
Design incorporates:.
A fully hardened and ground base which serves as an accurate reference surface.
A machined Vee groove in the base allows the gauge to be used conveniently on curved surfaces.
A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as a height gauge and also as a depth gauge.
Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work.
A 6.34 mm hole in the spring loaded scriber holder allows a dial indicator to be attached conveniently making the gauge useful for checking flatness, parallelism, heights, depths etc.
Grooves on the side of the base allow for comfortable grip.
Well tapered scriber for better sighting while working. The scriber tip is hardened to 55-60 HRC.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Vernier CalipersITM Groz Vernier Caliper
Metric & Imperial.
Stainless steel rule.
Convenient to use thumb screw locking mechanism.
Suitable for inside, outside, depth & step measurements.
Lower resolution : 0.02mm(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Depth GaugesITM Groz Vernier Depth Gauge
Made from stainless steel with thumbscrew locking mechanism.
Metric & Imperial.
Extendable depth gauge.
Accuracy : ± 0.05mm.
Resolution : 0.05mm.
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 100mm Depth Maxi-Cut Annular Cutters
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin To Suit 14mm to 17mm Diameter-Â SP16009
Pilot Pin To Suit 18mm Diameter and Above-Â SP18100(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 150mm Depth Maxi-Cut Annular Cutters
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin to Suit –Â SP18150
For use with solid materials over 100mm, use the 2 stage pilot pin Part No. SP20007(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 200mm Depth Maxi-Cut Annular Cutters
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin to Suit –Â SP18200
For use with solid materials over 100mm, use the 2 stage pilot pin Part No. SP20009(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gold SeriesITM Holemaker 25mm Depth Gold Series Annular Cutters
TITANIUM NITRIDE COATING.
The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.
– Increased surface hardness to 85HRC.
– Ceramic surface, reducing friction by up to 30%.
– Especially resistant to cold welding.
– Suitable for cutting a wide range of materials.M2AL HIGH SPEED STEEL MATERIAL.
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.Pilot Pin To Suit –Â SP16003
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Pro Cut Powder SteelITM Holemaker 25mm Depth Pro-Cut Annular Cutters
Pro-Cut ASP® powder steel cutters offer incredible wear resistance & ductility.
ASP® steels are produced by powder metallurgy through a 3-step process: gas-atomisation, hot isostatic pressing and post processing operations such as forging, rolling or drawing.
Suitable for drilling railway line, stainless steel & hardened steels, where high wear resistance and lifetime are required.
Incredible wear resistance.
Uniform micro structure.
Less susceptible to breakagePilot Pin To Suit –Â SP16003
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 25mm Depth Silver Series Annular Cutters
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.Pilot Pin To Suit –Â SP16003
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 25mm Depth TCT Holesaws
WIDE RANGE OF APPLICATIONS.
Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.TRIPLE-CUT 3 EDGE CUTTING SYSTEM.
There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 3.2mm Depth Cordless TCT Holesaws
Tungsten Carbide Tipped Holesaws suitable for drilling steel, stainless steel, aluminium, FRP, PVC, plastics & fibreglass. The tungsten carbide tip maintains excellent durability due to the ideal blade angles. The cutting angle design uses the latest metal cutting technology. The escape angle discharges shavings quickly for smooth snag free cutting.
NON-UNIFORM DISTANCES BETWEEN TEETH.
Vibration is reduced by the non-uniform and varied distances between the teeth.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.CORDLESS TOOLS.
The 3.2mm depth of cut Holemaker holesaws are specially designed for use with cordlesss tools.
Ejector spring fitted as standard. Not for impact use.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 35mm Depth Maxi-Cut Annular Cutters
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin To Suit 14mm to 17mm Diameter-Â SP16015
Pilot Pin To Suit 18mm Diameter and Above-Â SP18035(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 35mm Depth TCT Holesaws
WIDE RANGE OF APPLICATIONS.
Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.TRIPLE-CUT 3 EDGE CUTTING SYSTEM.
There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 4.5mm Depth TCT Holesaws
Tungsten Carbide Tipped Holesaws. Suitable for drilling steel, stainless steel, aluminium, FRP, PVC, plastics & fibreglass. The tungsten carbide tip maintains excellent durability due to the ideal blade angles. The cutting angle design uses the latest metal cutting technology. The escape angle discharges shavings quickly for smooth snag free cutting.
NON-UNIFORM DISTANCES BETWEEN TEETH.
Vibration is reduced by the non-uniform and varied distances between the teeth.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.Ejector spring fitted as standard. Not for impact use.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gold SeriesITM Holemaker 50mm Depth Gold Series Annular Cutters
TITANIUM NITRIDE COATING.
The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.
– Increased surface hardness to 85HRC.
– Ceramic surface, reducing friction by up to 30%.
– Especially resistant to cold welding.
– Suitable for cutting a wide range of materials.M2AL HIGH SPEED STEEL MATERIAL.
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.Pilot Pin To Suit –Â SP16004
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 50mm Depth Maxi-Cut Annular Cutters
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin To Suit 14mm to 17mm Diameter-Â SP16004
Pilot Pin To Suit 18mm Diameter and Above-Â SP18050(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 50mm Depth Maxi-Cut Annular Cutters Imperial
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin To Suit 14mm to 17mm Diameter-Â SP16004
Pilot Pin To Suit 18mm Diameter and Above-Â SP18050(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Pro Cut Powder SteelITM Holemaker 50mm Depth Pro-Cut Annular Cutters
Pro-Cut ASP® powder steel cutters offer incredible wear resistance & ductility.
ASP® steels are produced by powder metallurgy through a 3-step process: gas-atomisation, hot isostatic pressing and post processing operations such as forging, rolling or drawing.
Suitable for drilling railway line, stainless steel & hardened steels, where high wear resistance and lifetime are required.
Incredible wear resistance.
Uniform micro structure.
Less susceptible to breakagePilot Pin To Suit –Â SP16004
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 50mm Depth Silver Series Annular Cutters
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.Pilot Pin To Suit –Â SP16004
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 50mm Depth TCT Holesaws
WIDE RANGE OF APPLICATIONS.
Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.TRIPLE-CUT 3 EDGE CUTTING SYSTEM.
There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 5pc TCT Holesaw Kit 25mm Depth
Features
EXCELLENT VALUE FOR MONEY
This new range of sets offer excellent value for money compared to similar product in the market. A high quality and high performance T.C.T. holesaw set can now be a cost viable option for all professional trades.PREMIUM BLOW MOULD CASE
The quality blow mould case provides tough storage for the product, while also presenting the product to a high standard when displayed in store.TUNGSTEN CARBIDE TEETH
Suitable for repetitive drilling of steel, stainless-steel, aluminium, plastics, fibreglass and other hard and abrasive materials.HIGH PERFORMANCE TEETH GEOMETRY
Vibration is reduced by the non-uniform and varied distances between the teeth.
The escape angle discharges shavings quickly for smooth snag free cutting.ONE-PIECE BODY STRUCTURE
With a one-piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR
Getting the holesaw stuck in the back of the material is prevented for safer, faster drilling.Not for impact use.
Specifications
5 Piece Set Includes:
1 x MCTR16 – 16mm x 25mm
1 x MCTR20 – 20mm x 25mm
1 x MCTR25 – 25mm x 25mm
1 x MCTR32 – 32mm x 25mm
1 x MCTR40 – 40mm x 25mm(0 reviews) -
Hole Saws & KitsITM Holemaker 5pc TCT Holesaw Kit 4.5mm Depth
Features
EXCELLENT VALUE FOR MONEY
This new range of sets offer excellent value for money compared to similar product in the market. A high quality and high performance T.C.T. holesaw set can now be a cost viable option for all professional trades.PREMIUM BLOW MOULD CASE
The quality blow mould case provides tough storage for the product, while also presenting the product to a high standard when displayed in store.TUNGSTEN CARBIDE TEETH
Suitable for repetitive drilling of steel, stainless-steel, aluminium, plastics, fibreglass and other hard and abrasive materials.HIGH PERFORMANCE TEETH GEOMETRY
Vibration is reduced by the non-uniform and varied distances between the teeth.
The escape angle discharges shavings quickly for smooth snag free cutting.ONE-PIECE BODY STRUCTURE
With a one-piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR
Getting the holesaw stuck in the back of the material is prevented for safer, faster drilling.Not for impact use.
Specifications
5 Piece Set Includes:
1 x MCS16 – 16mm x 4.5mm
1 x MCS20 – 20mm x 4.5mm
1 x MCS25 – 25mm x 4.5mm
1 x MCS32 – 32mm x 4.5mm
1 x MCS40 – 40mm x 4.5mm(0 reviews) -
Hole Saws & KitsITM Holemaker 6pc TCT Holesaw Kit 25mm Depth
Features
EXCELLENT VALUE FOR MONEY
This new range of sets offer excellent value for money compared to similar product in the market. A high quality and high performance T.C.T. holesaw set can now be a cost viable option for all professional trades.PREMIUM BLOW MOULD CASE
The quality blow mould case provides tough storage for the product, while also presenting the product to a high standard when displayed in store.TUNGSTEN CARBIDE TEETH
Suitable for repetitive drilling of steel, stainless-steel, aluminium, plastics, fibreglass and other hard and abrasive materials.HIGH PERFORMANCE TEETH GEOMETRY
Vibration is reduced by the non-uniform and varied distances between the teeth.
The escape angle discharges shavings quickly for smooth snag free cutting.ONE-PIECE BODY STRUCTURE
With a one-piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR
Getting the holesaw stuck in the back of the material is prevented for safer, faster drilling.Not for impact use.
Specifications
6 Piece Set Includes:
1 x MCTR16 – 16mm x 25mm
1 x MCTR20 – 20mm x 25mm
1 x MCTR25 – 25mm x 25mm
1 x MCTR32 – 32mm x 25mm
1 x MCTR40 – 40mm x 25mm
1 x MCTR50 – 50mm x 25mm(0 reviews) -
Hole Saws & KitsITM Holemaker 6pc TCT Holesaw Kit 4.5mm Depth
Features
EXCELLENT VALUE FOR MONEY
This new range of sets offer excellent value for money compared to similar product in the market. A high quality and high performance T.C.T. holesaw set can now be a cost viable option for all professional trades.PREMIUM BLOW MOULD CASE
The quality blow mould case provides tough storage for the product, while also presenting the product to a high standard when displayed in store.TUNGSTEN CARBIDE TEETH
Suitable for repetitive drilling of steel, stainless-steel, aluminium, plastics, fibreglass and other hard and abrasive materials.HIGH PERFORMANCE TEETH GEOMETRY
Vibration is reduced by the non-uniform and varied distances between the teeth.
The escape angle discharges shavings quickly for smooth snag free cutting.ONE-PIECE BODY STRUCTURE
With a one-piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR
Getting the holesaw stuck in the back of the material is prevented for safer, faster drilling.Not for impact use.
Specifications
6 Piece Set Includes:
1 x MCS16 – 16mm x 4.5mm
1 x MCS20 – 20mm x 4.5mm
1 x MCS25 – 25mm x 4.5mm
1 x MCS32 – 32mm x 4.5mm
1 x MCS40 – 40mm x 4.5mm
1 x MCS50 – 50mm x 4.5mm(0 reviews) -
Gold SeriesITM Holemaker 75mm Depth Gold Series Annular Cutters
TITANIUM NITRIDE COATING.
The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.
– Increased surface hardness to 85HRC.
– Ceramic surface, reducing friction by up to 30%.
– Especially resistant to cold welding.
– Suitable for cutting a wide range of materials.M2AL HIGH SPEED STEEL MATERIAL.
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.Pilot Pin To Suit –Â SP18075
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 75mm Depth Maxi-Cut Annular Cutters
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin To Suit 14mm to 17mm Diameter-Â SP16005
Pilot Pin To Suit 18mm Diameter and Above-Â SP18075(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular CuttersITM Holemaker 75mm Depth Maxi-Cut Annular Cutters Imperial
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.Pilot Pin To Suit –Â SP18075
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mini CuttersITM Holemaker Adaptor, Suit Mini Cutter
Features
Allows the use of Holemaker Mini Cutters in Holemaker Magnetic Base Drilling Machines with standard 3/4″ Weldon Arbors.Specifications
Internal Diameter: 1/2″ Weldon
Shank: 1/2″ Weldon(0 reviews) -
Hole Saws & KitsITM Holemaker Arbor for Sheet Metal Cutter Suits 21-25mm Cutters
Holemaker Arbor to suit 21mm – 25mm, 13/16″ – 1″ Sheet Metal Cutters. 3/8-24 Thread Size.
Includes pilot pin, washers & hex key.(0 reviews) -
Hole Saws & KitsITM Holemaker Arbor for Sheet Metal Cutter Suits 8-20mm Cutters
Holemaker Arbor to suit 8mm – 20mm, 5/16″ – 3/4″ Sheet Metal Cutters. 3/8-24 Thread Size.
Includes pilot pin(0 reviews) -
Mini CuttersITM Holemaker Arbor, Suit Mini Cutter
Features
Allows the use of Holemaker Mini Cutters in Standard Twist Drill Chucks.Specifications
Internal Diameter: 1/2″ Weldon
Shank: 10mm Straight(0 reviews) -
-
Hole Saws & KitsITM Holemaker Cobalt Electricians Holesaw Set
Features
PREMIUM QUALITY BI-METAL M42 COBALT HIGH SPEED STEEL.
Suitable for drilling a wide range of materials including steel, aluminium, brass, cast iron, plastics & wood. The M42 (8% Cobalt) high speed steel teeth offer optimal cutting life & performance.VARIABLE PITCH 4 / 6 TEETH PER INCH.
For reduced vibration delivering increased life, performance & accuracy.Specifications
9 Piece Set Includes:
1 x UN100-016 – 16mm (5/8″)
1 x UN100-020 – 20mm
1 x UN100-025 – 25mm (1″)
1 x UN100-032 – 32mm (1-1/4″)
1 x UN100-040 – 40mm (1-9/16″)
1 x UN100-051 – 51mm (2″)
1 x UN100-125 – 11/32″ Arbor
1 x UN102-140 – 7/16″ Arbor
1 x UN102-145 – Arbor Thread Adaptor(0 reviews)