BORDO
Showing 1–36 of 49 results
-
Drill Bits/SetsBORDO Screw Extractor 10 Piece Set Nos 1-5 & Left Hand Stub Drills
- Screw Extractor 10 Piece Set Nos 1-5 & Left Hand Stub Drills
- 10 Piece Set, includes HSS-Co5 (Cobalt) Left Hand Stub Drills.
- Chrome alloy spiral screw extractor.
- Coarse-pitched tapered screw thread.
- Spiral flute screw extractors are ideally suited for removing broken bolts, studs & socket screws from medium to hard metals.
- Typically the required screw extractor will be approx. 2/3 the diameter of the fixing you are extracting.
- Use a centre punch to mark the centre of the fixing before drilling to prevent the drill bit wandering.
- Select a drill bit that is suitable for drilling into the specific material – typically HSS or HSS-Co5. Ideally the drill should be “Left Hand” which will prevent further tightening of the fixing during drilling.
- When using left hand drills ENSURE THE DRILL IS SET TO REVERSE.
- Drill pilot hole in centre of broken bolt, screw or stud.
- Lightly tap screw extractor into hole and turn anti-clockwise with a tap wrench or spanner.
- Damaged bolt, screw or stud will unwind out of the hole.
- Avoid excessive lateral loads – breakage could result.
- Wear eye and hearing protection.
(0 reviews) -
BurrsBORDO 6400 Series Tungsten Carbide Burrs
All Bordo Burrs are CNC machined for consistently high quality, and offering the latest cut technology. Manufactured and inspected to strict standards from sintered tungsten carbide, its novel design cuts better and lasts longer, giving you a more cost effective and efficient solution for difficult to machine materials.
Find all Bordo Burr options at www.bordo.com.au
Once you find what you need, contact us.
(0 reviews) -
Accessories & PartsBORDO Carabiner with 5 x 1/4″ Hex Quick Change Holders
- Suitable for use with all 1/4 hex shank accessories
- Keep your most often used hex shank accessories just a click away.
- These heavy duty quick change holders securely grip any standard 1/4 hex shank accessory.
- Clip the carabiner to your tool belt, tool bucket or even a belt loop on your pants and your favourite accessory will always be in easy reach.
- 150kg Extra Heavy Duty Carabiner (Non-loadbearing carabiner. Must not be used for climbing. Not certified as personal protective equipment (PPE) against falling).
(0 reviews) -
BurrsBORDO Carbide Countersink Single Flute Indexable
- Carbide strip cutter with replaceable insert.
- Clean cutting even at lower RPMs.
- Tri-flat shank faciltiates high torque transmission in standard three jaw chucks.
- Chatter free countersinking and deburring even at low RPMs.
- Excellent surface finish.
- Two cutting edges for longer tool life.
- Cemented carbide insert is an alloy of Tungsten Carbide (WC) and Cobalt (Co).
- B100 is a unique rare metal grade with great heat and cracking resistance.
- TiAlN PVD coated – suitable for applications with low to intermediate cutting speed.
- PVD coated grades are recommended for applications with low feed rate where high edge toughness is required.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO Cobalt Step Tip Drill & Accessory Set
- Bordo Metric Cobalt Tough HSS-Co5 Step Tip Extreme Performance Drill.
- Super-fast drilling in ferrous & non-ferrous metals and all timbers.
- Step Tip negates the need for a pilot drill in metals and provides extreme drilling speeds in ferrous and non-ferrous metals & all timbers.
- 1/4 hex shank is ideal for use with impact drivers, quick change adaptors and bit holders.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews) -
Drill Bits/SetsBORDO Drill Set – Metric HSS Cobalt Tough Metric 19 Piece
- 1-13mm 19 Pce HSS Cobalt Drill Set ABS Case
- Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
- DIN338
- 135º Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135º point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews) -
Screwdrivers & Allen KeysBORDO Dual Mode ES200 Electric Screwdriver
- Electric Mode 2 Nm.
- Manual Mode 10 Nm.
- Speed 280 RPM.
- Charge 3.6 V USB.
- Auto on LEC task light.
- Includes Phillips#2 / Slot 6mm double ended bit.
- Includes USB charging cable.
(0 reviews) -
Cutting WheelsBORDO Dymaxion Stainless Steel (INOX) Thin Cutting Disc
- Pack Quantity – 25
- Suitable for cutting stainless steel (inox).
- High cutting performance.
- Thin cut off discs reduce wastage.
- Fast cutting for extended battery life in cordless tools.
- Do not exceed maximum safe speed of 80m/s.
- Complies with DIN EN 12413 European standard and as 1788.1-1987 Australian standard.
- Cutting disc must be mounted correctly as per machine manufacturer’s specifications.
- Metal guards must be fitted and used on all machines.
- If cutting disc is chipped,cracked or damaged it must not be used, and needs to be replaced.
- Equal diameter flanges must be fitted. Flanges must be a minimum 1/3 diameter of cutting disc.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsBORDO E-Z Chamfer Hex Shank De-Burring & Chamfering Tool
- 18-38mm E-Z Chamfer hex shank de-burring and chamfering tool
- 18-38mm (23/32-1.1/2″) capacity.
- E-Z Chamfer efficiently removes burrs and ridges from bolts, pipe, threaded rod, bar and dowels. It is suitable for use on metals including mild and hardened steels, stainless steel, copper and brass, as well as timber, fibreglass and plastics.
- E-Z Chamfer prevents sparks and burns. When used correctly at low RPMs the tool will not overheat the workpiece. Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die.
- Unique patented design!
- World first M2-HSS Chamfer Tool!
- Heavy duty single piece construction!
- Suitable for use on ferrous and non-ferrous metals including MILD STEEL – U.S. Grade 2 – Metric Grade 4.8
- Suitable for use on ferrous and non-ferrous metals including HARD STEEL – U.S. Grade 5 – Metric Grade 8.8
- Suitable for use on ferrous and non-ferrous metals including VERY HARD STEEL – U.S. Grade 8 – Metric Grade 10.9
- Suitable for use on ferrous and non-ferrous metals including STAINLESS STEEL – 300 Series
(0 reviews) -
Chemicals, Lubricants & AdhesivesBORDO Goliath Rapid Tap Neat Cutting Oil
- Relton USA all-metal cutting fluid. Extends tool life.
- Rapid Tap® All Metal Cutting Fluid greatly extends tool life with superior lubricating and cooling properties for more than just tapping.
- Uses include: tapping, drilling, milling, broaching, boring, turning, machine threading, engraving, reaming, sawing, and more.
- Rapid Tap® creates a super fine machined finish operation after operation with anti mist protection for a healthier working environment.
- Excels in tough materials.
- Greatly extends tool life.
- No special labelling or reporting.
- Super-fine machined finish in operation after operation.
- Excels in tough materials.
- Anti-mist protection for a healthier work environment.
- Contains no 1,1,1- trichloroethane or other ozone-depleting chemicals
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/SetsBORDO HSS-M2AI Annular Cutter Depth 100mm
- Annular Cutters achieve burr-free finished holes without the need for pre-drilling or step drilling.
- Faster and more accurate than using standard HSS twist drills.
- Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting.
- The precision ground flutes run the entire length of the cutter providing efficient chip removal.
- Increased cutting speed.
- Reduced tooth load.
- Minimized tool wear.
- Extended tool life.
- Close tolerance drilling without runout.
- Reamed quality, burr free finished holes.
- Resharpenable.
- Bordo Annular Cutters feature a 3/4″ universal shank that suits most standard machines including Hougen, Slugger, Rotabroach, Rotabest and Nitto.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/SetsBORDO HSS-M2AI Annular Cutter Depth 25mm
- Annular Cutters achieve burr-free finished holes without the need for pre-drilling or step drilling.
- Faster and more accurate than using standard HSS twist drills.
- Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting.
- The precision ground flutes run the entire length of the cutter providing efficient chip removal.
- Increased cutting speed.
- Reduced tooth load.
- Minimized tool wear.
- Extended tool life.
- Close tolerance drilling without runout.
- Reamed quality, burr free finished holes.
- Resharpenable.
- Bordo Annular Cutters feature a 3/4″ universal shank that suits most standard machines including Hougen, Slugger, Rotabroach, Rotabest and Nitto.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/SetsBORDO HSS-M2AI Annular Cutter Depth 50mm
- Annular Cutters achieve burr-free finished holes without the need for pre-drilling or step drilling.
- Faster and more accurate than using standard HSS twist drills.
- Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting.
- The precision ground flutes run the entire length of the cutter providing efficient chip removal.
- Increased cutting speed.
- Reduced tooth load.
- Minimized tool wear.
- Extended tool life.
- Close tolerance drilling without runout.
- Reamed quality, burr free finished holes.
- Resharpenable.
- Bordo Annular Cutters feature a 3/4″ universal shank that suits most standard machines including Hougen, Slugger, Rotabroach, Rotabest and Nitto.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/SetsBORDO HSS-M2AI Annular Cutter Depth 75mm
- Annular Cutters achieve burr-free finished holes without the need for pre-drilling or step drilling.
- Faster and more accurate than using standard HSS twist drills.
- Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting.
- The precision ground flutes run the entire length of the cutter providing efficient chip removal.
- Increased cutting speed.
- Reduced tooth load.
- Minimized tool wear.
- Extended tool life.
- Close tolerance drilling without runout.
- Reamed quality, burr free finished holes.
- Resharpenable.
- Bordo Annular Cutters feature a 3/4″ universal shank that suits most standard machines including Hougen, Slugger, Rotabroach, Rotabest and Nitto.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BORDOBORDO MVRK Aviation Snips
- Cut up to 18 gauge (1.2mm) cold rolled steel.
- Cut up to 22 gauge (0.7mm) stainless steel.
- Premium quality drop forged chrome molybdenum steel alloy blades.
- Induction hardened for superior performance and long blade life.
- Single handed easy open squeeze and release thumb latch.
- Micro serrated blades prevent material slipping during cutting.
- Durable soft grip chemical resistant handles.
- Ideal for cutting a range of heavy duty materials including: sheet metal, metal studs, ductwork, metal & PVC drywall angles and trims, flashing, spouting, dampcourse, leather, industrial fabrics and more.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsBORDO MVRK Camo EDC Folding Knife
- Stainless steel EDC (Every Day Carry) drop point folding knife.
- Precision ground and honed to an ultra-sharp edge.
- 3-1/2″, 88mm, coated stainless steel blade.
- Lightweight, durable and compact.
- Smooth flip out action with blade lock.
- Ultra glide bearing.
- Ergonomic moulded handle.
- Ambidextrous thumb stud.
- Secure belt clip.
- Heavy duty lanyard loop.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BORDOBORDO MVRK Piranha Multi Function Industrial Snips
- Industry leading premium quality stainless steel micro serrated blades.
- Optimised geometry to cut paper and card, Kevlar, carbon and glass cloth, fabric, leather, carpet, wire, cable, sheet metals, rubber and other tough materials.
- Ambidextrous with dual sided, quick release thumb lock.
- Durable soft grip chemical resistant handles.
- BONUS impact resistant safety holster with integrated blade guard and belt clip.
- THESE SNIPS DO IT ALL!
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Thread RepairBORDO NES 2 External Thread Restorer
- NES 2 External Thread Restorer suits sizes 17.00 – 38.00mm (11/16 – 1.1/2; 3/8 – 1.1/8 Pipe)
- One NES tool restores Metric, Imperial, Right Hand and Left Hand threads and replaces many taps and/or dies.
- They do not require calibration.
- Self adjusting to any size and pitch within tool range.
- Hardened HSS cutting blades for long tool service life.
- Tool uses undamaged section of thread to guide cutting blades during repair to damaged areas.
- Removes rust and burrs.
- Quick to set up and simple to use.
(0 reviews) -
Thread RepairBORDO PowerCoil Thread Repair Kit
- PowerCoil Wire Thread Inserts are used to repair damaged or worn out threads, PowerCoil Wire Thread Inserts can also be used to create new stronger threads in original equipment.
- They provide a permanent, corrosion and wear resistant internal thread which is usually stronger than the original parent material thread.
- PowerCoil wire thread inserts are manufactured from precision profiled diamond shaped stainless steel wire and formed into a helical spiral.
- They provide high strength internal threads that resist the effects of temperature and corrosion.
- Their unique design ensures superior threads whose compound performance cannot be reproduced by any other single fastening method.
- They are much lighter and less expensive than any other equivalent type of thread insert and because of their compact size they can generally be incorporated into existing designs where no previous provision has been made.
- PowerCoil kits contain the wire thread inserts, tap, installation tool, and, in many cases, the tapping drill and break off tool needed for particular sizes of PowerCoil insert.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
RatchetsBORDO Quick Change Ratchet T Pattern Tap Wrench
- Quick Change Ratchet T Pattern Tap Wrench
- Hi-Torque Tap Wrench
- Heavy duty ratchet mechanism.
- Metric sizes M2-M12.
- Imperial sizes 5G-1/2″.
- Includes 65mm extension.
- Supplied with two chucks.
(0 reviews) -
AccessoriesBORDO Quick Straps
- Ideal for securing loads on roof racks, trailers and utes.
- Fast and simple to use with spring loaded crocodile clip buckle.
- Strong and durable UV resistant polyester webbing.
- Colour coded by lengths for fast identification.
- 25mm wide for improved load holding.
- 250kg breaking strain.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting WheelsBORDO Rapidcut Thin Kerf Blade
- Rapidcut Thin Kerf Blade for Timber – All Types
- High performance, ultra thin kerf timber blades from 140mm to 305mm.
- Nano-shield coating reduces friction for reducing saw load, resists gumming keeping blade cooler and extending blade life, protects blade from corrosion.
- Tru-plate fully hardened and tempered steel body is precision balanced to run truer.
- Ultra k-10 high density, high performance diamond ground carbide teeth for extreme durability and cutting life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO Saber Metric Spiral Flute Hex Shank HSS Step Drill Set
- Saber Metric Spiral Flute Hex Shank HSS Step Drill Set
- Saber HSS Spiral Flute Hex Shank Step Drill Set – Metric
- Saber step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- 1/4″ hex shank for fast tool changing in impact drivers and quick change adaptors.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
(0 reviews) -
Thread RepairBORDO Saber S1 Tap & Die Set – Metric & SAE
- Saber S1 Tap and Die Set – Metric & SAE
- Tungsten steel taps and dies.
- Create new threads in aluminium and mild steel.
- Clean and repair existing threads.
- 48 intermediate lead taps and 48 button dies.
- 4Gx40, 5Gx40, 6Gx32, 8Gx32, 10Gx24, 10Gx32, 12Gx24, 1/4″x20, 1/4″x28, 5/16″x18, 5/16″x24, 3/8″x16, 3/8″x24, 7/16″x14, 7/16″x20, 1/2″x13, 1/2″x20, 9/16″x12, 9/16″x18, 5/8″x11, 5/8″x18, 3/4″x10, 3/4″x16.
- 2×0.4, 3×0.5, 4×0.7, 5×0.8, 6×1.0, 7×1.0, 8×1.0, 8×1.25, 9×1.25, 10×1.0, 10×1.25, 10×1.5, 11×1.5, 12×1.75, 12×1.25, 14×2.0, 14×1.5, 16×2.0, 16×1.5, 18×2.5, 18×1.5.
- NPT1/8″x27, NPT1/4″x18, BSP1/8″x28, BSP1/4″x19.
- 5 HSS Twist DRILLS 2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm.
- 5 X Screw Extractors #1, #2, #3, #4, #5.
- 2 X Screw Pitch Gauges. 2 X Die Holders. 3 X Tap Wrenches. 1 X Screwdriver.
- 1 X Centre Punch.
(0 reviews) -
Annular Cutter/SetsBORDO TCT Annular Cutter Depth 100mm
- Precision ground teeth ensure fast, accurate, burr free holes without the need for pre drilling.
- Heavy duty tungsten carbide annular cutters achieve a longer tool life and the ability to cut harder materials than HSS cutters.
- Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting.
- Ideal for use in stainless steel and high tensile steels.
- Flutes run the full length of the hardened steel body provide excellent chip removal.
- Reduced tooth load.
- Minimized tool wear.
- Extended tool life.
- Close tolerance drilling without runout.
- Reamed quality, burr free finished holes.
- Bordo Annular Cutters feature a 3/4″ universal shank that suits most standard machines including Hougen, Slugger, Rotabroach, Rotabest and Nitto.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/SetsBORDO TCT Annular Cutter Depth 50mm
- Precision ground teeth ensure fast, accurate, burr free holes without the need for pre drilling.
- Heavy duty tungsten carbide annular cutters achieve a longer tool life and the ability to cut harder materials than HSS cutters.
- Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting.
- Ideal for use in stainless steel and high tensile steels.
- Flutes run the full length of the hardened steel body provide excellent chip removal.
- Reduced tooth load.
- Minimized tool wear.
- Extended tool life.
- Close tolerance drilling without runout.
- Reamed quality, burr free finished holes.
- Bordo Annular Cutters feature a 3/4″ universal shank that suits most standard machines including Hougen, Slugger, Rotabroach, Rotabest and Nitto.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/SetsBORDO TCT Annular Cutter Depth 75mm
- Precision ground teeth ensure fast, accurate, burr free holes without the need for pre drilling.
- Heavy duty tungsten carbide annular cutters achieve a longer tool life and the ability to cut harder materials than HSS cutters.
- Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting.
- Ideal for use in stainless steel and high tensile steels.
- Flutes run the full length of the hardened steel body provide excellent chip removal.
- Reduced tooth load.
- Minimized tool wear.
- Extended tool life.
- Close tolerance drilling without runout.
- Reamed quality, burr free finished holes.
- Bordo Annular Cutters feature a 3/4″ universal shank that suits most standard machines including Hougen, Slugger, Rotabroach, Rotabest and Nitto.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws/KitsBORDO Bi-Metal Hole Saws – Electrician’s Master Kit
Bordo Bi-Metal Hole Saws Electrician’s Master Kit 14 Piece (7010-S1)
Contains: Bi-Metal Hole Saws – 16, 20, 25, 32, 40, 50, 54 & 64mm
Extra Heavy Duty Spade Bits – 16, 20 & 25mm. Spare HSS Pilot Bit.
Mandrels – 7/16″ Posi-Lock Quick Change & 3/8″ Hex
(0 reviews) -
Hole Saws/KitsBORDO Bi-Metal Hole Saws – Industrial Kit
Bordo Bi-Metal Hole Saws Industrial Kit 20 Piece (7010-S6)
Contains: Bi-Metal Hole Saws – 16, 20, 22, 25, 32, 38, 40, 51, 54, 60, 64, 70, 89, 92, 100 & 114mm
Mandrels – 7/16″ Posi-Lock Quick Change & 3/8″ Hex
Extension – 3/8″ – 7/16″ Hex Quick Change 300mm
Spare HSS Pilot Bit
(0 reviews) -
Hole Saws/KitsBORDO Bi-Metal Hole Saws – Plumber’s Pipe Kit
Bordo Bi-Metal Hole Saws Plumber’s Pipe Kit 16 Piece (7010-S3)
Contains: Bi-Metal Hole Saws – 16, 19, 22, 25, 27, 30, 35, 44, 57, 73, 92 & 114mm
Mandrels – 7/16″ Posi-Lock Quick Change & 3/8″ Hex
Extension – 3/8″ – 7/16″ Hex Quick Change 300mm
Spare HSS Pilot Bit
(0 reviews) -
-
Grinding WheelsBORDO Cup Wheel Grinding Disc – Double
Bordo Universal Double Row Cup Wheel (7469-DR)
Sizes: 103mm, 125mm, 180mm
Use for: Cured concrete, Clay bricks, Terracotta tiles, Hebel, Bluestone, Granite, Paint & glue, Epoxy resin, Tile adhesive, Grout & mortar.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grinding WheelsBORDO Cup Wheel Grinding Disc – Super Turbo
Bordo Super Turbo Cup Wheel (7469-T)
Sizes: 103mm, 125mm, 180mm
Use for: Cured concrete, Clay bricks, Terracotta tiles, Hebel, Bluestone, Granite, Paint & glue, Epoxy resin, Tile adhesive, Grout & mortar.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO Drill Bit – Delta Point Bright HSS Jobber
Bordo Delta Point Bright HSS Jobber Drill Bit (Code 2015)
Sizes: 1mm – 13mm
Drills Faster – Lasts Longer
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO Drill Bit – SDS Plus
Bordo SDS Plus X-Bit Drills (Code 2538)
Sizes: 5mm – 25mm
Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone, Brick.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO Drill Set – 111 Piece HSS Bright Finish Assortment 1-10mm
Bordo 111 Piece HSS Bright Finish Drill Set Assortment 1-10mm (2007-MA1)
In “Tradesman Tough” Injection Moulded Plastic Case
(0 reviews)
