Chain & Lifting Fittings

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677- 1 and ASTM A952/ A952M.
• Certified by DGUV GS-OA-15-05
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL. Suitable for use with both Grade 80 and Grade 100 chain.

Austlift GC type G100 clevis grab hooks provide the flexibility to shorten chain leg on a sling may also be used for back-hooking. Grab hooks come with supporting lugs to allow no reduction of the working load limit. The clevis is designed for ease of connection of chain.

• Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.

• 25% higher work load limit than G80.

• Batch tested, test certificates available upon request.

Austlift LC type G100 clevis self-locking hook allows the hook to be easily closed with one hand, it will close itself when the load is engaged. The hook will not open until the trigger at the back is pressed. Clevis style allows easy connection to the chain.

• Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.

• 25% higher work load limit than G80.

• Batch tested, test certificates available upon request.

• Spare trigger kits and load pins are available.

Austlift LE type G100 eye self-locking hook allows the hook to be easily closed with one hand, it will close itself when the load is engaged. The hook will not open until the trigger at the back is pressed. Eye style allows easy connection to links, shackles and wire.

• Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.

• 25% higher work load limit than G80.

• Batch tested, test certificates available upon request.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with DIN PAS 1061 and ASTM A952/A 952M,EN 1677- 1.
• Certified by DGUV GS-OA-15-05
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• Designed for the assembly of chain slings where wide throat openings are necessary.
• Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with DIN PAS 1061 and ASTM A952/A 952M,EN 1677- 1.
• Certified by DGUV GS-OA-15-05
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• Designed for the assembly of chain slings where wide throat openings are necessary.
• Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.

Austlift SD type G100 head-rings are designed to cater for single leg and double leg chain sling or wire rope sling applications.

• Marked with single and double chain sizes, designation, grade, manufacture quality mark and Austlift branded.
• 25% higher work load limit than G80 alloy chain.
• Batch Tested. Test certificates available upon request.

Austlift MD type G100 multi head rings are designed with a large ring and two intermediate links to cater for two, three and four leg chain sling or wire rope sling applications.

• Marked with single and double chain size, designation, grade, manufacture quality mark and Austlift branded.

• 25% higher work load limit than G80.

• Batch tested, test certificates available upon request.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677- 3 and ASME B30.26, ASME B30.10, PAS1061.
• Certified by DGUV GS-OA-15-05
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• Magnaflux crack detection is performed 100% on each batch.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677- 1 and ASME B30.26.
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• The use of Clevis Clutch still allows 100% of the chain sling capacity.
• With the locking system and spring locking pin design to enhance security and prevent the chains from disengaging.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677- 2 and ASME B30.26, ASME B30.10, PAS1061.
• Certified by DGUV GS-OA-15-05
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL. Tempering temperature minimum 400°C
• Magnaflux crack detection is performed 100% on each batch.

Austlift SC type G100 clevis sling hook are a general purpose hook suitable for most sling applications and comes with a cast latch for added safety.

Clevis allows easy connection to chain.

• Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.

• 25% higher work load limit than G80.

• Batch tested, test certificates available upon request.

• Spare trigger kits are available.

Austlift Grade 100 Swivel Self-locking Hook has a ball bearing swivel to allow the hook to swivel under load.

• Assists in reducing the twist of sling as load is applied.
• Allows product to be rotated under load if used as a centre lifting point.
• Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.
• 25% higher work load limit than G80.
• Batch tested, test certificates available upon request.
• Spare trigger kits are available.
• Fatigue tested > 20,000 times.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677- 3 and ASME B30.26, ASME B30.10, PAS1061.
• Certified by DGUV GS-OA-15-05
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• Magnaflux crack detection is performed 100% on each batch.
• Built with ball bearing and enables full swivel feature under load.