Milwaukee Tools
Showing 577–612 of 1009 results
-
M12 Batteries & Chargers
MILWAUKEE M12™ REDLITHIUM™-ION HIGH OUTPUT™ 2.5AH COMPACT BATTERY
The M12™ REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah Compact Battery delivers 25% more power and runs 25% cooler than the M12™ REDLITHIUM™-ION 2.0Ah Compact Battery. This increased performance of the lithium-ion battery gives you the same power and runtime of an M12™ REDLITHIUM™-ION battery in a lighter and more compact package. The 12-volt battery pack delivers fade-free power and runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Its compact, lightweight design allows you to work in tight workspaces and reduces fatigue. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below -18°C. In addition, the M12™ REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah is built with a resistant housing, providing increased protection against exposure to common oils, greases, and solvents found in automotive and manufacturing environments. The M12™ REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah battery is fully compatible with 125+ M12™ solutions.
Contact us for pricing and availability.
(0 reviews) -
M12 Batteries & Chargers
MILWAUKEE M12™ REDLITHIUM™-ION HIGH OUTPUT™ 2.5AH STARTER PACK
The M12™ REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah Compact Battery delivers 25% more power and runs 25% cooler than the M12™ REDLITHIUM™-ION 2.0Ah Compact Battery. This increased performance of the lithium-ion battery gives you the same power and runtime of an M12™ REDLITHIUM™-ION battery in a lighter and more compact package. The 12-volt battery pack delivers fade-free power and runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Its compact, lightweight design allows you to work in tight workspaces and reduces fatigue. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below -18°C. In addition, the M12™ REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah is built with a resistant housing, providing increased protection against exposure to common oils, greases, and solvents found in automotive and manufacturing environments. The M12™ REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah battery is fully compatible with 125+ M12™ solutions.
Quickly charges all M12 batteries. Power up your M12 REDLITHIUM-ION in less than an hour with the M12 Lithium-Ion Charger. It communicates directly with the battery pack to manage charges and features an easy-to-load design. The charger’s slim profile requires little bench-top room, while the pass-through plug conserves valuable outlet space. Monitor battery charges for all of your M12 cordless tools with the onboard indicator light.
Contact us for pricing and availability.
(0 reviews) -
M12 Batteries & Chargers
MILWAUKEE M12™ REDLITHIUM™-ION HIGH OUTPUT™ 5.0AH BATTERY
The M12™ REDLITHIUM™-ION HIGH OUTPUT™ 5.0Ah Battery delivers 25% more power and runs 25% cooler than the M12™ REDLITHIUM™-ION 4.0Ah Battery. The increase in power elevates the performance of the entire M12™ system and drives the next breakthrough in M12 FUEL™. The lithium-ion battery delivers fade-free power and runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Each battery pack is built for heavy-duty use, runs cooler, and performs in climates below -18°C. In addition, the M12™ REDLITHIUM™-ION HIGH OUTPUT™ 5.0Ah Battery is built with a resistant housing, increasing the protection against exposure to common oils, greases, and solvents found in transportation maintenance and manufacturing environments. The M12™ REDLITHIUM™-ION HIGH OUTPUT™ 5.0Ah battery is fully compatible with 125+ M12™ solutions.
Contact us for pricing and availability.(0 reviews) -
M12 Skins
MILWAUKEE M12™ RIGHT ANGLE DRILL/DRIVER (TOOL ONLY)
Work more efficiently with the most versatile right angle drill. With a head size of just 95mm, this M12 Right Angle Drill/Driver is compact and lightweight for drilling and fastening in tight spaces, yet delivers 12Nm of torque. It’s the first subcompact with a spindle lock chuck for maximum versatility and grip. It also features the industry’s first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. The M12 REDLITHIUM-ION battery pack delivers more work per charge and more work over pack life than the competitors. The onboard fuel gauge helps you monitor the charge precisely, so there’s less downtime on the job, and a built-in LED Light illuminates the work surface. An extended paddle switch gives you ultimate comfort and convenience during prolonged use
(0 reviews) -
M12 Skins
MILWAUKEE M12™ SOLDERING IRON (TOOL ONLY)
The M12 Soldering Iron delivers fast application speeds by reaching operational temperature in under 18 seconds and maintaining an optimised temperature throughout the most demanding applications. The heat indicator utilises REDLINK INTELLIGENCE to notify users when the tool is ready-to-use and safe-to-store, eliminating the guesswork. The 3-stop pivoting head provides unmatched access by allowing users the ability to adapt the tool for the application and solder in more confined spaces. The M12 Soldering Iron powered by REDLITHIUM-ION battery technology delivers up to 45 minutes of run-time on a M12 2.0Ah Battery Pack.
(0 reviews) -
M12 Kits
MILWAUKEE M12™ SPOT POLISHER/DETAIL SANDER KIT
MILWAUKEE Tool continues to expand its 12V REDLITHIUM-ION system with the introduction of the new M12™ Spot Polisher/Detail Sander Kit. Optimised to provide the fastest and most precise detail work, the new tool performs the work of two tools in one by easily switching between polishing and sanding modes. As the most compact cordless polisher on the market, the M12™ Spot Polisher/Detail Sander is the perfect complement to a full size polisher for a faster finish. Featuring Dual Mode Control and a variable speed trigger, the M12™ Spot Polisher/Detail Sander delivers increased user control, regardless of the application. A tool-free accessory change allows the user to quickly change between polishing and sanding accessories.
(0 reviews) -
Lighting
MILWAUKEE M12™ STAND AREA LIGHT (TOOL ONLY)
MORE PORTABLE. ALL-DAY OPERATION – The M12 Stand Area Light has the lightest weight in its class and a 45% smaller footprint than M18 Stand Lights that allows it to be easily carried and setup in the most confined spaces. The M12SAL-0 extends up to 172cm to provide 1,400 Lumens of TRUEVIEW High Definition Output on high mode and 700 Lumens on low mode. When powered by an M12 REDLITHIUM-ION 6.0Ah battery pack, it runs up to 10 hours on a single charge. After deployment, the M12SAL-0 is supported by impact-resistant, reinforced legs that form a compact base with a low center of gravity to help survive any job site.
(0 reviews) -
M12 Skins
MILWAUKEE M12™ STICK TRANSFER PUMP (TOOL ONLY)
The M12™ Stick Transfer Pump delivers maximum filtration for uninterrupted pumping in catch basins, water meter boxes, trenches, sump pump pits, and more. Featuring a 91 cm submersible aluminium barrel, this transfer pump provides the extension needed to reach water at the bottom of trenches and hard to reach areas. Equipped with HydroPass filter technology, the 360° filter maximises flow in heavy debris, minimising downtime caused by clogging. Powered by the M12™ battery platform, this water transfer pump eliminates repetitive manual pumping and improves control, requiring only one hand to pump, freeing the other to control the outflow. With a 4.6 metre max head height and an outlet compatible with a standard 19 mm garden hose, this pump delivers the power to push water farther – out of pits and basins, over walls, and to the ideal deposit location. Compatible with all of our M12™ REDLITHIUM Batteries this pump keeps you productive, effortlessly pumping up to 34 Litres per minute and 1,040 Litres when using a M12™ REDLITHIIUM™-ION 4.0 Ah battery pack
(0 reviews) -
Tool Belts & Pouches
MILWAUKEE M12™ TOOL HOLSTER
Designed to fit M12 drilling and fastening tools, the M12 Tool Holster increases productivity and provides the user with a quick and durable means of tool retrieval and protection on the job site. Constructed of heavy duty nylon material, the 233520 features an easy snap-on strap and on-board bit storage for added user convenience.
(0 reviews) -
Workwear
MILWAUKEE M12™ TOUGHSHELL™ HEATED VEST GREY
The M12™ TOUGHSHELL™ Heated Vest is powered by M12™ REDLITHIUM™-ION Battery Technology and features an advanced heat technology system that combines lightweight and durable carbon fiber heating elements, enhanced fabric construction, and optimized interior liners to deliver heat built to outlast. The new generation TOUGHSHELL™ Stretch Polyester has been re-engineered to stretch and move throughout work while being as tough as previous TOUGHSHELL™ products. The MILWAUKEE® heated vest has a unique battery pocket Pass-Thru design that is easy to use with front or back pocket battery placement, allowing users the versatility and comfort needed depending on the situation. The Milwaukee heated vest is a go-to for protection from the elements on the jobsite or when enjoying the outdoors.
Sizes Available S-2XL
(0 reviews) -
Workwear
MILWAUKEE M12™ WOMEN’S HEATED HOODIE GREY
Powered by M12™ REDLITHIUM™-ION Battery Technology, the M12™ Heated Hoodie provides heat built for complete comfort. Using a one-touch LED controller, the advanced carbon fiber heating elements create and distribute heat to the chest and back. A hidden battery pass-thru pocket construction allows for front or back battery placement, increasing comfort and flexibility depending on the situation. Combining a durable cotton/polyester fleece and comfortable jersey lining, this hoodie provides a versatile three-season solution to keep heat in and not add bulk.
(0 reviews) -
M18 Skins
MILWAUKEE M18 FUEL™ 1/2″ COMPACT IMPACT WRENCH WITH FRICTION RING (TOOL ONLY)
The M18 FUEL™ 1/2″ Compact Impact Wrench with Friction Ring delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE™ Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 1/2″ Compact Impact Wrench with Friction Ring has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
M18 Skins
MILWAUKEE M18 FUEL™ 1/2″ COMPACT IMPACT WRENCH WITH PIN DETENT (TOOL ONLY)
The M18 FUEL™ 1/2″ Compact Impact Wrench with Pin Detent delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE™ Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 1/2″ Compact Impact Wrench with Pin Detent has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
M18 Skins
MILWAUKEE M18 FUEL™ 1/2″ HIGH TORQUE IMPACT WRENCH WITH FRICTION RING (TOOL ONLY)
The M18 FUEL High Torque ½” Impact Wrench with Friction Ring provides a full corded replacement delivering 1354Nm of fastening torque and 1897Nm of nut-busting torque. The industry’s most compact cordless High Torque Impact wrench at 213mm in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This tool includes a ½” Friction Ring anvil which provides quick changing sockets. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
(0 reviews) -
M18 Skins
MILWAUKEE M18 FUEL™ 1/2″ MID-TORQUE IMPACT WRENCH WITH PIN DETENT (TOOL ONLY)
The M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Pin Detent delivers access in tight spaces, up to 881 Nm of nut-busting torque, and maximum power to weight ratio. This battery-powered impact wrench weighs only 1.58 kg, makin it extremely versatile, capable of performing a wide variety of applications. A POWERSTATE™ Brushless Motor provides the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The MILWAUKEE® 1/2″ Mid-Torque Impact Wrench with Pin Detent is only 152 mm in length, providing users access to stubborn fateners where larger impact wrenches cannot fit without needing to disassemble components to reach bolts. Tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 48 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
M18 Skins
MILWAUKEE M18 FUEL™ 1/4″ BRAKING DIE GRINDER WITH SLIDE SWITCH (TOOL ONLY)
The M18 FUEL™ 1/4″ Braking Die Grinder with Slide Switch delivers corded performance allowing users to remove up to 305mm of weld bead per charge on a M18B5. Equipped with RAPIDSTOP™ technology that provides braking in under 2 seconds, the M18 FUEL™ 1/4″ Braking Die Grinder with Slide Switch enhances safety while maximising productivity. The POWERSTATE™ brushless motor delivers 27,000 RPM and maximum power to allow users to maintain grinding power while in the tight spaces. The cordless braking die grinder has up to 55mm accessory compatibility for surface prep applications and material removal while featuring REDLINK PLUS™ Intelligence, an advanced system of cordless power tool electronics, for maximum performance and tool life.
(0 reviews) -
M18 Skins
MILWAUKEE M18 FUEL™ 1/4″ HEX IMPACT DRIVER (TOOL ONLY)
The M18 FUEL™ 1/4″ Hex Impact Driver features the POWERSTATE™ Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.
(0 reviews) -
M18 Skins
MILWAUKEE M18 FUEL™ 1/4″ RIVET TOOL WITH ONE-KEY™ (TOOL ONLY)
The M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ delivers fast cordless riveting. It eliminates the need for hoses and compressors while delivering maximum life. This rivet gun significantly increases productivity and portability, and ensures a higher level of safety. The premium steel alloy 3-jaw design delivers more work between jaw changes. While lightweight, the M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ has been designed to withstand harsh shop or assembly plant environments. Manufactured with an all-metal gearcase, impact strength plastics, and protective over-mold the tool is designed for maximum durability. The POWERSTATE™ Brushless Motor delivers 2,041 kg of pulling force for high strength blind rivets in all materials. This rivet tool pulls up to 900 3/16” (4.76 mm) aluminium or 500 1/4” (6.35 mm) aluminium blind rivets on one charge with an M18™ REDLITHIUM™-ION 2.0Ah battery (not included). REDLINK™ PLUS Intelligence ensures maximum performance and protects the tool and battery against overloads, over-heating, and over-discharge. With ONE-KEY™ compatibility, the tool allows the user to track and manage the tool within their inventory.
(0 reviews) -
Tool Accessories
MILWAUKEE M18 FUEL™ 1/4″ RIVET TOOL WITH ONE-KEY™ 152MM (6”) EXTENSION
The 6″ (152mm) Extension for the M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ allows the user to install rivets in hard-to-reach applications. The all-metal extension has a low profile with a diameter of only 34mm (1.34″), equal to the clearance of the standard outer jaw housing on the tool. The 152 mm (6”) Extension is compatible with the MILWAUKEE® M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ (M18FPRT, sold separately)
(0 reviews) -
Tool Accessories
MILWAUKEE M18 FUEL™ 1/4″ RIVET TOOL WITH ONE-KEY™ JAW SET
The M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ Jaw Set boasts a premium steel alloy 3-jaw design, increasing jaw durability and life whilst decreasing the number of jaw replacements. The jaws can be easily swapped in and out of the tool and install 3/16″ (4.76 mm), 7/32″ (5.56 mm), 1/4″ (6.35 mm) and 9/32″ (7.14 mm) rivets. Compatible with the MILWAUKEE® M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ (M18FPRT, sold separately).
(0 reviews) -
Tool Accessories
MILWAUKEE M18 FUEL™ 1/4″ RIVET TOOL WITH ONE-KEY™ RETENTION NOSE PIECES (4 PACK)
The M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ Retention Nose Pieces prevent inserted rivets from falling out of the rivet tool when the tool is held in any orientation. 3/16″ (4.76 mm), 7/32″ (5.56 mm), 1/4″ (6.35 mm) and 9/32″ (7.14 mm) retention nose pieces are included. Compatible with the MILWAUKEE® M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ (M18FPRT, sold separately)
(0 reviews) -
M18 Power Packs
MILWAUKEE M18 FUEL™ 10 PIECE POWER PACK 10C3
WHAT’S INCLUDED
M18 FUEL™ 13mm Hammer Drill/Driver (Tool Only)
M18 FUEL™ 1/4″ Hex Impact Driver (Tool Only)
M18 FUEL™ 1/2″ Compact Impact Wrench with Friction Ring (Tool Only)
M18 FUEL™ 125mm (5″) Angle Grinder with Deadman Paddle Switch (Tool Only)
M18 FUEL™ 165mm Circular Saw (Tool Only)
M18 FUEL™ HACKZALL™ Reciprocating Saw (Tool Only)
M18 FUEL™ Multi-Tool (Tool Only)
M18™ Compact Blower (Tool Only)
M18™ Pivoting Area Light (Tool Only)
M18™ 7.5 Litre Wet/Dry Vacuum (Tool Only)
(0 reviews) -
M18 Power Packs
MILWAUKEE M18 FUEL™ 11 PIECE POWER PACK 11A3
WHAT’S INCLUDED
M18 FUEL™ 13mm Hammer Drill/Driver (Tool Only)
M18 FUEL™ 1/4″ Hex Impact Driver (Tool Only)
M18 FUEL™ 184mm Circular Saw (Tool Only)
M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Friction Ring (Tool Only)
M18 FUEL™ 125mm (5″) Angle Grinder with Deadman Paddle Switch (Tool Only)
M18 FUEL™ 26mm SDS Plus Rotary Hammer (Tool Only)
M18 FUEL™ D-Handle Jigsaw (Tool Only)
M18 FUEL™ SAWZALL™ Reciprocating Saw (Tool Only)
M18™ LED Work Light (Tool Only)
M18 FUEL™ Multi-Tool (Tool Only)
M18™ 7.5 Litre Wet/Dry Vacuum (Tool Only
(0 reviews) -
M18 Skins
MILWAUKEE M18 FUEL™ 12″ (305MM) TOP HANDLE CHAINSAW (TOOL ONLY)
The M18 FUEL™ 12″ (305mm) Top Handle Chainsaw provides users with fast cut speeds and the power to cut hardwoods, while eliminating the headaches associated with petrol engines. The chainsaw is designed to meet the performance, durability, and ergonomic needs of the professional arborist, power utility linesmen, and landscape maintenance professional. M18 FUEL™ technology allows the saw to reach full throttle in under 1 second, providing the user ultimate control and fast application speed. The POWERSTATE™ Brushless Motor maintains speed under heavy loads without bogging down. The chainsaw eliminates the headaches associated with petrol engines, such as pull starts, high noise levels, emissions, and regular engine maintenance. The REDLINK™ PLUS Intelligence enables full-circle communication between the tool and battery, providing the user with maximum levels of performance, protection, and productivity. Optimised for REDLITHIUM™-ION HIGH OUTPUT™ batteries, when paired with an 8.0Ah battery (sold separately), the saw delivers up to 150 cuts per charge in 4″ x 4″ (102mm) cedar. The saw has a professionally demanded feature set including an easy access chain tensioner, automatic oiler, metal bucking spikes, onboard scrench storage, lanyard loop, and climbing scabbard.
(0 reviews)