Trade Specific Supplies
Showing 2881–2916 of 2922 results
-
-
Trade Specific SuppliesBuilders Plastic 4mx50mx200um
Black Plastic 4m x 50m x 200um
Extra Heavy Duty High Impact Plastic
(0 reviews) -
Trade Specific SuppliesBuilders Line
Builders Line
Available in 8x100m, 12x100m & 12x500m
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
PantsWORKIT Cargo Pants Multi Pocket Taped
Workit Cotton Drill Regular Weight Multi Pocket Taped Cargo Pants – Code 1003T
- Two front angled pockets
- Two back flat pockets with hook and loop fastening
- Two side cargo and welt pockets with hook and loop fastening
- Six belt loops, Adjustable side tab on waistband
- Reflective tape around lower leg
- Sizes Regular (72-112), Stout (87-132) and Long (74-94)
- Colours: Navy
- 100% Cotton drill preshrunk 310gsm
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Night Use
- Acceptable fabric composition as listed in AS/NZS 1020:1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection – AS 4399:2020 Sun Protective Clothing – Evaluation and Classification
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cleaning SuppliesClear Bag 700x1100x200um (Pack 50)
Clear Bag 700 x 1100 x 200um
Qty: Pack 50
(0 reviews) -
Brooms, Rakes, Scrapers & ShovelsConcrete Placer Rake
WASP Concrete Placer Rake – Ultralight Alloy (Code CPR500)
PICK UP / LOCAL DELIVERY TO GOULBURN
(0 reviews) -
PantsDNC Cotton Drill Pants Taped
Cotton Drill Taped Work Pants 3314
Available in Navy & Orange
Sizes: Regular (72-107), Stout (87-132) and Long (74-94)
- SUN Protection UPF 40+ – 50+ DNC garments are tested for UPF (ultraviolet protection factor) in accordance with AS/NZS4399:1996. The level of protection varies depending on the fabric and colour of the garment. 15+ good protection, 30+ / 35+ very good protection, 40+ / 50+ excellent protection.
- Environmentally Friendly Green Dye Oeko-Tex Standard 100 Safe to wear against the skin All DNC garments use the Green Dye only, except for the Patrol Saint Flame Retardant range. All DNC garment fabric fully complies with Oeko-Tex standard 100 class II for products with direct contact to the skin in which prohibited to use aromatic amines, sensitizing dyes and cancer risk dyes. Green dye should meet the following conditions: Does not contain harmful or non-aromatic amine; dye itself, non-carcinogenic, sensitization, acute toxicity; the use of formaldehyde and, after extraction of heavy metals in the following limits; non-environmental hormone; non persistent organic pollutants; does not produce pollution of the environment harmful chemicals; not produce chemicals that pollute the environment; colour fastness and superior to disable the use of dyes.
- DNC has an extensive 100% cotton range for a natural feeling garment with anti-static and electrical protection features. Anti-static The latest technology is used in the production of DNC carbon grid anti-static jacket and pants, complies BS5958.2-1991. DNC cotton garments containing no metal buttons or zippers are also classified under DNC anti-static. Electrical Protection DNC cotton made garments containing no metal buttons or zippers and are suitable for use in electrical or gas trades.
- DNC use 3M Reflective tape throughout 99% of the Hi-Visibility range. 3M Australia supply is only provided for distribution to approved 3M Australia supply partners with national wide quality guarantee. Check details under product for relevant 3M codes. All 3M reflective tape complies with AS/NZS1906.4:2010 for Hi-Vis material. 3M8906-Home wash up to 30 cycles @ 60° C. 3M8910- Home wash up to 50 cycles @ 60° C.
- HiVis Night Only, New AS/NZS 4602.1:2011 DNC HiVis garments are manufactured to comply with New Hi Vis standard Class N, AS/NZS 4602.1:2011 to meet the requirements of Hi-Vis safety standards Design of garments for the reflective tape configuration, for night use only.
- HiVis D/N Fabric & Design New AS/NZS 4602.1:2011 DNC HiVis garments are manufactured to comply with New Hi Vis standard Class F AS/NZS1906.4:2010, Class D/N, AS/NZS 4602.1:2011 to meet the requirements of Hi-Vis safety standards HiVis Fabric & Design of garments, for day and night use
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
PantsDNC Denim Stretch Jeans Taped
Denim Stretch Jeans Taped 3347
Sizes: Regular (72-112), Stout (87-132)
- SUN Protection UPF 40+ – 50+ DNC garments are tested for UPF (ultraviolet protection factor) in accordance with AS/NZS4399:1996. The level of protection varies depending on the fabric and colour of the garment. 15+ good protection, 30+ / 35+ very good protection, 40+ / 50+ excellent protection.
- Environmentally Friendly Green Dye Oeko-Tex Standard 100 Safe to wear against the skin All DNC garments use the Green Dye only, except for the Patrol Saint Flame Retardant range. All DNC garment fabric fully complies with Oeko-Tex standard 100 class II for products with direct contact to the skin in which prohibited to use aromatic amines, sensitizing dyes and cancer risk dyes. Green dye should meet the following conditions: Does not contain harmful or non-aromatic amine; dye itself, non-carcinogenic, sensitization, acute toxicity; the use of formaldehyde and, after extraction of heavy metals in the following limits; non-environmental hormone; non persistent organic pollutants; does not produce pollution of the environment harmful chemicals; not produce chemicals that pollute the environment; colour fastness and superior to disable the use of dyes.
- DNC Stretch utilises the fabric technology to give a more comfortable and easy fit.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
PantsDNC Ladies Cotton Drill Pants Taped
Cotton Drill Taped Work Pants 3328
Available in Navy
Sizes: 6-24
- SUN Protection UPF 40+ – 50+ DNC garments are tested for UPF (ultraviolet protection factor) in accordance with AS/NZS4399:1996. The level of protection varies depending on the fabric and colour of the garment. 15+ good protection, 30+ / 35+ very good protection, 40+ / 50+ excellent protection.
- Environmentally Friendly Green Dye Oeko-Tex Standard 100 Safe to wear against the skin All DNC garments use the Green Dye only, except for the Patrol Saint Flame Retardant range. All DNC garment fabric fully complies with Oeko-Tex standard 100 class II for products with direct contact to the skin in which prohibited to use aromatic amines, sensitizing dyes and cancer risk dyes. Green dye should meet the following conditions: Does not contain harmful or non-aromatic amine; dye itself, non-carcinogenic, sensitization, acute toxicity; the use of formaldehyde and, after extraction of heavy metals in the following limits; non-environmental hormone; non persistent organic pollutants; does not produce pollution of the environment harmful chemicals; not produce chemicals that pollute the environment; colour fastness and superior to disable the use of dyes.
- DNC has an extensive 100% cotton range for a natural feeling garment with anti-static and electrical protection features. Anti-static The latest technology is used in the production of DNC carbon grid anti-static jacket and pants, complies BS5958.2-1991. DNC cotton garments containing no metal buttons or zippers are also classified under DNC anti-static. Electrical Protection DNC cotton made garments containing no metal buttons or zippers and are suitable for use in electrical or gas trades.
- DNC use 3M Reflective tape throughout 99% of the Hi-Visibility range. 3M Australia supply is only provided for distribution to approved 3M Australia supply partners with national wide quality guarantee. Check details under product for relevant 3M codes. All 3M reflective tape complies with AS/NZS1906.4:2010 for Hi-Vis material. 3M8906-Home wash up to 30 cycles @ 60° C. 3M8910- Home wash up to 50 cycles @ 60° C.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
PantsWORKIT Cotton Drill Work Pants Taped
Last of stock available.
Cotton Drill Regular Weight Taped Work Pants – Code 1002
- Two front angled pockets
- Two back patch pockets
- Coin pocket in waistband
- Mobile phone pocket on RHS leg
- Seven belt loops
- Single front pleats
- YKK Zip
- Reflective tape around lower leg
- Sizes Regular (72-112), Stout (87-132) and Long (74-94)
- Colours: Navy
- 100% Cotton drill preshrunk 310gsm
- Meets AS/NZS 4602.1:2011 High-Visibility Safety Garments for Night Use
- Acceptable fabric composition as listed in AS/NZS 1020:1995 The control of undesirable static electricity
- Rated 50+ UPF Sun Protection – AS 4399:2020 Sun Protective Clothing – Evaluation and Classification
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Trade Specific SuppliesDampcourse Polythene
Polythene Dampcourse
350mm x 30m x 500um
380mm x 30m x 500um
450mm x 30m x 500um
PICK UP / FREE LOCAL DELIVERY TO GOULBURN
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Danger SignsDanger Asbestos
Danger Sign Asbestos – Code DASBE
Available in various sizes and materials
- Danger signs are used to warn of a particular hazard, hazardous conditions or environment that is likely to be life threatening.
- Comply with Australian Standards AS1319
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Danger SignsDanger Asbestos Removal In Progress
Danger Sign Asbestos Removal In Progress – Code DASBR
Available in various sizes and materials
- Danger signs are used to warn of a particular hazard, hazardous conditions or environment that is likely to be life threatening.
- Comply with Australian Standards AS1319
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
PantsWORKIT Double Taped Cotton Drill Work Pants
Workit Cotton Drill Work Pants with Double 3M Reflective Tape – Code 1011
Sizes: 77-112 Regular / 87-122 Stout
Colour: Navy
- 100% Cotton drill 310gsm
- Preshrunk
- 3M (8910) Reflective tape
- Coin pocket in waistband
- Single front pleats
- 2 angled side pocket
- Back patch pockets
- Mobile phone pocket on right side
- YKK zip
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Tags & AccessoriesElectrical Lead Stand
- Steel base and stand
- Plastic non-conductive lead holder
(0 reviews) -
HarnessesSKYLOTEC Ignite Nucleon
This full-featured fall arrest and restraint harness with skid plate and arrester eyelet was developed specifically for wind energy, but it is also used in many other fields such as telecoms, power and construction where the highest standards of safety and functionality apply. IGNITE NUCLEON scores with a breathable hip pad that distributes the load evenly on the hip and is protected against abrasion from the outside with a protective sliding plate. The correct position of the sternal and dorsal fall arrest eyelet can be perfectly adjusted to the user. Leg pads are interchangeable if required. An integrated fall indicator and innovative stainless steel OKTALOCK buckles provide additional safety. Excess webbing is no longer a nuisance thanks to practical webbing fixation. The material loops and tool eyelets are used to accommodate tools.
- Lightweight and comfortable to wear.
- Sliding plate against abrasion.
- Breathable hip pads.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HarnessesSKYLOTEC Ignite Proton Wind
The IGNITE PROTON WIND features all the same attributes as the PROTON but with the following additions to this already‚ state of the art harness:
· Synthetic rear protection plate on the rear of the AIRPAD waist belt. Provides protection to the AIRPAD in the tight confines of a wind turbine ladder or even general work at height applications.
· Chest eyelet for belay, but also for rescue
· Alloy Dorsal & Sternal attachment points
· Alloy Limited Fall Arrest attachment point on the centre front of the waist belt.
· Adjustable Confined Space loops
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ChalkDYMARK Engineering Chalk
- Economical and semi-permanent marking
- Ideal for industrial grade applications
- Quick and easy to layout jobs
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Eye Bolt DIN580 Zinc
Eye bolts DIN580 are generally used as a removable lifting point where a rated female thread or nut can be utilised also can be used as a termination for chain, wire rope and other assembles where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish, manufactured with a standard larger eye. Only available in metric thread sizes.
• Conforms to DIN580 and DIN582 marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Eye Nut DIN582 Zinc
Eye Nut DIN 582 are generally used as a removable lifting point where a rated nut can be utilised. Also can be used as a termination for chain, wire rope and other assemblies where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish,manufactured with a standard larger eye. Only availablein metric thread sizes.
• Conforms to DIN 582, marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
Trade Specific SuppliesFoam Joint Sticky Back 150mmx25m
Sticky Back Foam Expansion Joint 150mm x 25m
(0 reviews) -
Load RestraintAUSTLIFT Loadbinder Ratchet Wing Grab Hook
Ratchet style load binder with winged grab hooks combined with Grade 70 chain are an effective way to restraint heavy loads for transport operations, With the benefit of high pretension and the added safety of screw stops to ensure full thread contact while in use.
• Manufactured from dropped forged steel quenched and tempered.
• Marked with chain size, lashing capacity, grade, batch numbered and branded Austlift for traceability.• All load binders come with swivel winged grab hooks to achieve full lashing capacity.
Chain sizes: 6mm, 8mm, 10mm, 13mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BootsMack Granite 2 Safety Boot Penetration Resistant
Mack Granite 2 Penetration Resistant Safety Boot – Black
Built for work on rough terrain the GRANITE II protects against impacts from above, below and the side, making it ideal for workers in construction, resources and machine maintenance.
Sizes: 7 – 13
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BootsMack Terrapro Zip Safety Boot
Mack Terrapro Zip Safety Boot – Honey
TERRAPRO ZIP is ideal for workers that might need a quick exit due to sparks and water hazards or just want the ease of access, with the performance features of the ADAPTTM Range.
Sizes: 7 – 13
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load RestraintAUSTLIFT Maxibinder (AusBinder V3) with Swivel Head
Code 202704 – 6mm – Lashing Capacity 2300kg
Code 202705 – 8mm – Lashing Capacity 3800kg
• Ergonomically designed.
• High pre-tensioning force.
• 1/8 Chain link length adjustment.
• Alloy steel, heat treated for durability.
• Conforms to AS/NZ4344 standard.
• Multiple purposes.
• Designed for higher pre-tensioning strength.
• Designed and manufactured by Australian Lifting Centre.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cables, Extension Leads & PowerboardsPortable Power Outlet
- 10A or 15A
- Safety switch & circuit breaker protection.
- Gasket sealed.
- Neon activation indicator.
- Inlet membrane protection
- Dust & moisture resistant (IP53).
- Power outlets recessed for added protection.
- Large sturdy base with fixing holes for strength & stability.
- Heavy duty power cord can be fully wound onto unit.
- Flat clear cover on RCD/MCB prevents damage.
- Double pole shuttered power outlets for safety.
- Highly visible polycarbonate casing.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
-
-
-
Load RestraintAUSTLIFT Ratchet Tie Down Straps Hk/Keeper
Austlift Ratchet Tie Downs Hk/Keeper
204026 – 25mm x 6m LC750kg
204035 – 35mm x 6m LC1500kg
204250 – 50mm x 9m LC2500kg
Ratchet tie down assemblies are the complete lashing system with the benefits of high pretension therefore less damage to cargo for general transport requirements.
• Manufactured from high tenacity polyester webbing, heavy duty hook and keepers stamped with lashing capacity. Heavy duty powder coated ratchet buckle.
• ID tagged on both tail and free end of strap with, lashing capacity, strap length, safety information, date of manufacture, batch numbered and branded Austlift for traceability.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load RestraintAUSTLIFT Ratchet Tie Down Straps S Hooks
Austlift Ratchet Tie Down S Hooks
204020 – 25mm x 4.5m LC350kg
204030 – 35mm x 6m LC500kg
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Lifting SlingsAUSTLIFT Snatch Strap Nylon
Snatch straps are manufactured from 100% nylon webbing to ensure a minimum stretch of 20% suitable for 4WD recovery and towing applications.
• 10000kg minimum break strength with a minimum stretch of 20%.
• Reinforced eyes for added protection from abrasion.
• Straps come with safety information tag.Available in 9Mx10T / 9Mx15T / 9Mx40T
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BootsSteel Blue 332101 Hobart E/S Safety Boot with Bump Cap
Steel Blue 332101 Hobart Elastic Sided Safety Boot c/w Bump Cap
Colour: Black
Sizes: 5 – 14 (half sizes 6.5 – 12.5)
- 145mm ankle length elastic sided boot
- 200J steel toecap
- Premium water resistant full grain waxy leather
- TPU outsole heat resistant to 130 degrees
- Anti-static TPU outsole
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BootsSteel Blue 332102 Argyle Safety Boot with Bump Cap
Steel Blue 332102 Argyle Safety Boot with Bump Cap
Colour: Black or Wheat
Sizes: 5 – 14 (half sizes 5.5 – 13.5)
- 150mm derby style lace-up ankle boot with padded collar and tongue, plus bump cap
- 200J steel toecap
- Premium water resistant full grain waxy leather
- TPU outsole heat resistant to 130 degrees
- Anti-static TPU outsole
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
