Automotive Supplies
Showing 73–108 of 823 results
-
Automotive Lifting & WorkshopITM Floor Jack Hydraulic Garage Quick Lift
Features
The ITM trolley jack range covers all the options you’ll need for your home garage or professional workshop. Suitable for use with small compact cars, low profile sports cars, SUV’s, 4WD’s and heavy duty machinery, all ITM trolley jacks feature a professional quality rugged steel constructionl, a collapsible handle for added storage options and heavy duty rear castors which pivot 360° for easy positioning. All designed to conform to the mandatory Australian standard AS/NZS 2615:2016, you can rest assured an ITM trolley jack will give you long lasting performance.- Twin pistons for faster lifting speeds
- Heavy duty steel wheels
- Rear casters pivot 360º for easy positioning
- Perfect for the professional trade workshop
- Complies with mandatory Australian Standard AS/NZS 2615:2016
Specifications
- Working Load Limit: 3000kg
- Height Lowered: 110mm
- Height Raised: 505mm
- Net Weight: 37.5kg
(0 reviews) -
Automotive Lifting & WorkshopITM Floor Jack Hydraulic Heavy Duty Long
The ITM heavy duty long floor jacks and perfectly suited for heavy duty workshop use. Boasting an industrial-quality pump with a swivel saddle, a foot jack for rapid lift and rear castors for easy jack manoeuvring, this is a must for any professional. The long chassis and high working load limit makes these heavy duty long floor jacks ideally suited for lifting heavy trucks, buses, agriculture and construction equipment.
- Heavy duty steel frame for maximum durability
- Long frame for easy access lift point
- Safety-overload system
- Additional foot pedal control provides quick set-up and lift
- Oversized swivel casters for easy mobility
- Complies with mandatory Australian Standard AS/NZS 2615:2016
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Automotive Lifting & WorkshopITM Floor Jack Hydraulic Offroad
Features
The ITM Off-Road trolley Jack is built with sturdy construction and off-road readiness, making it suitable for a variety of uses from garage maintenance to off-road environments. Low enough to work on most sedans and hatchbacks, but tall enough to reach your lifted 4×4, whether it is mud, grass, sand, gravel or even your concrete garage floor this jack can be used with 4WDs, ATV’s. passenger vehicles and camper trailers due to an impressive lift height up to 735mm. It is specifically designed for off-road conditions with solid composite wheels, full length skid plate and 360º rotating rear casters for easy maneuvering- Full-length steel skid plate to prevent sinking on sand and damaging internal components
- Fast lifting dual pump action
- High lift design with a max height of 735mm
- 360º rotating near casters for easy manoeuvre whilst working
- Heavy duty solid composite wheels that are ideal for off-road conditions
- Heavy duty side handles for safe and easy lifting
- Complies with mandatory Australian Standard AS/NZS 2615:2016
Specifications
- Working Load Limit: 1500kg
- Lifting Range (Without Adaptor): 155-552mm
- Lifting Range (With Adaptor): 265-735mm
- Net Weight: 41kg
(0 reviews) -
Automotive Lifting & WorkshopITM Floor Jack Hydraulic Trolley
The ITM trolley jack range covers all the options you’ll need for your home garage or professional workshop. Suitable for use with small compact cars, low profile sports cars, SUV’s, 4WD’s and heavy duty machinery, all ITM trolley jacks feature a professional quality rugged steel constructionl, a collapsible handle for added storage options and heavy duty rear castors which pivot 360° for easy positioning. All designed to conform to the mandatory Australian standard AS/NZS 2615:2016, you can rest assured an ITM trolley jack will give you long lasting performance.
- Manufactured from heavy duty steel
- Heavy duty steel wheels
- Rear Casters Pivot 360º for easy positioning
- Perfect for the professional trade workshop
- Complies with mandatory Australian Standard AS/NZS 2615:2016
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Automotive Lifting & WorkshopITM Floor Jack Hydraulic Ultra Low Profile
Features
The ITM trolley jack range covers all the options you’ll need for your home garage or professional workshop. Suitable for use with small compact cars, low profile sports cars, SUV’s, 4WD’s and heavy duty machinery, all ITM trolley jacks feature a professional quality rugged steel constructionl, a collapsible handle for added storage options and heavy duty rear castors which pivot 360° for easy positioning. All designed to conform to the mandatory Australian standard AS/NZS 2615:2016, you can rest assured an ITM trolley jack will give you long lasting performance.- Low profile design allows easy access under low vehicles
- Fast lifting dual pump action
- Manufactured from heavy duty steel
- Collapsible handle with heavy duty rubber grip
- Swivel saddle for easy positioning
- Heavy duty steel wheels
- Complies with mandatory Australian Standard AS/NZS 2615:2016
Specifications
- Working Load Limit: 1200kg
- Height Lowered: 70mm
- Height Raised: 610mm
- Net Weight: 45kg
(0 reviews) -
Automotive Lifting & WorkshopITM Floor Jack Scissor
Features
- Heavy duty industrial quality, for professional workshop applications
- Scissor style design provides working height range of 118 to 415mm with a small storage size
- Strong single-piece steel handle for sturdy operation
- Double solid steel gears for easy lifting
- Heavy-duty double hinged steel
- Precision threaded shaft ensures smooth lifting
- Reinforced base plate provides greater stability
- Complies with mandatory Australian Standard AS/NZS 2615:2016
Specifications
- Working Load Limit: 1200kg
- Height Lowered: 118mm
- Height Raised: 415mm
- Net Weight: 3.5kg
(0 reviews) -
Air Operated ToolsITM M7 Air Grit Blasting Gun 1L
For removing rust, old paint and ingrained dirt etc.
Adjustable nozzle.
Hanger hookCup Capacity: 1L
Air Requirements: 4.3 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 280mm
Net Weight: 0.57kg
Sound Pressure: 85dBA(0 reviews) -
Air Operated ToolsITM M7 Angle Grinder 100mm 1.3HP
Available with imperial or metric spindle sizes.
Safety lever throttle.
1.3 HP motor for stall resistance.
One piece housing reduces maintenance costs.
Heavy duty air cooled spiral gears and double bearings for durability.
Swivel guard on 115mm & 125mm.
Grinding wheel not includedWheel Diameter: 100mm (4″)
Spindle Size: M10 x 1.5
Free Speed: 11000 RPM
Air Requirements: 4.2 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 232mm
Rated Power: 1.3HP
Net Weight: 1.81kg
Sound Pressure: 90 dBA
Vibration Level: 5.79 (A)m/s²(0 reviews) -
Air Operated Tools
ITM M7 Angle Grinder 125mm 1.3HP Swivel Guard
Available with imperial or metric spindle sizes.
Safety lever throttle.
1.3 HP motor for stall resistance.
One piece housing reduces maintenance costs.
Heavy duty air cooled spiral gears and double bearings for durability.
Swivel guard.
Grinding wheel not includedWheel Diameter: 125mm (5″)
Spindle Size: M14 x 2.0
Free Speed: 11000 RPM
Air Requirements: 4.2 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 232mm
Rated Power: 1.3HP
Net Weight: 1.81kg
Sound Pressure: 90 dBA
Vibration Level: 7.06 (A)m/s²(0 reviews) -
Air Operated ToolsITM M7 Belt Sander
Belt Size: 20mm x 520mm (3/4″ x 19″)
Free Speed: 16000 RPM
Air Requirements: 4 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 430mm
Net Weight: 1.4kg
Sound Pressure: 88 dBA
Vibration Level: 1.3m/s²(0 reviews) -
GeneralITM M7 Deburring Bevelling Machine R2 Capacity
Quiet, powerful, light weight & low air consumption pneumatic bevelling machine.
- Chamfering depth:
- C0.1 – C2.0mm (13 gauge) aluminium & steel
- C0.1 – C1.2mm (18 gauge) stainless steel
- Cutting oscillations: 28000rpm
- Tool size: 105 x 64mm
- Air pressure: 90psi
- Sound level: 85db
- Air consumption: 2 CFM
- Air inlet: 1/4″
- Air hose:3/8″
- Overal length: 105mm
- Weight: 0.5kg
(0 reviews) - Chamfering depth:
-
GeneralITM M7 Deburring Bevelling Machine R4 Capacity
1.3 HP Motor for stall resistance.
Quick release turntable for quick conversion angle.
Heavy duty air cooled spiral gears and double bearings for durability.Chamfer Size: R2, R3, R4 & Cx45 aluminium, mild steel & stainless-steel
Chamfer Thickness: 0-4 mm
Free Speed: 12,000 RPM
Overall Length: 240 mm
Air Consumption: 5.5 CFM / 155 LPM / 1/4″ Air Inlet
Weight: 3.75 kg(0 reviews) -
Air Operated ToolsITM M7 Die Grinder 20,000RPM 1/4″ & 1/8″
Metal front cap.
Safety lever throttleCollet Size: 1/4″ & 1/8″
Free Speed: 20000 RPM
Air Requirements: 10 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 190mm
Rated Power:0.9HP
Net Weight: 0.65kg
Sound Pressure: 75.7 dBA
Vibration Level: 0.8m/s²(0 reviews) -
Air Operated ToolsITM M7 Die Grinder 25,000RPM 1/4″ & 1/8″
Extended air die grinder.
Safety lever throttleCollet Size: 1/4″ & 1/8″
Free Speed: 25000 RPM
Air Requirements: 10 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 280mm
Rated Power:0.3HP
Net Weight: 0.63kg
Sound Pressure: 81.5 dBA
Vibration Level: 1.8m/s²(0 reviews) -
Air Operated ToolsITM M7 Die Grinder Angle Head 19,000RPM
90° angle head.
Safety lever throttleCollet Size: 1/4″ & 1/8″
Free Speed: 19000 RPM
Air Requirements: 10 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 160mm
Rated Power:0.3HP
Net Weight: 0.51kg
Sound Pressure: 74.4 dBA
Vibration Level: 1.7m/s²(0 reviews) -
Air Operated ToolsITM M7 Drill 1100RPM 1/2″ Capacity
Chuck Size: 1/2″ (13mm)
Free Speed: 1100RPM
Air Requirements: 4 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 270mm
Net Weight: 1.58kg
Sound Pressure: 90 dBA
Vibration Level: 3m/s²(0 reviews) -
Impact WrenchITM M7 Impact Wrench 1/2″ Drive
Magnesium alloy & composite material construction.
Extremely powerful & very lightweight.
Twin hammer type clutch.
Patented EZ Grease AnvilSquare Drive: 1/2″
Bolt Capacity: 1″ (25mm)
Torque Range: 200-800 ft-lb / 271-1085 Nm
Max Torque at 5 seconds: 1200 ft-lb / 1627 Nm
Free Speed: 8500 RPM
Air Requirement: 4.8 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 179mm
Net Weight: 1.7kg
Sound Pressure: 85dBA
Vibration Level: 4.7m/s²(0 reviews) -
Impact WrenchITM M7 Impact Wrench D Handle 3/4″ Drive
Square Drive: 3/4″
Bolt Capacity: 1-1/16″ (27mm)
Torque Range: 200-1400 ft-lb / 271-1898 Nm
Max Torque at 5 seconds: 1500 ft-lb / 2034 Nm
Free Speed: 6000 RPM
Air Requirement: 6.34 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 320mm
Net Weight: 5.7kg
Sound Pressure: 106dBA
Vibration Level: 3.3m/s²(0 reviews) -
Air Operated ToolsITM M7 Impact Wrench Kit 1/4″
Set In carry case.
Rocking Dog Clutch.Kit contains:.
1pc 1/4″ Air Impact Wrench (M7-NC2710).
5pcs Socket : 8, 9, 10, 11, 12mm.
1pc 1/4″ Drive Universal Joint.
1pc 1/4″ 44mm Extension Bar.
1pc Plug (Adaptor)Square Drive: 1/4″
Bolt Capacity: M8
Torque Range: 7.4-29.5 ft-lb / 10-40 Nm
Max Torque at 5 seconds: 29 ft-lb / 40 Nm
Free Speed: 11000 RPM
Air Requirement: 5.3 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 136mm
Net Weight: 0.8kg
Sound Pressure: 91dBA
Vibration Level: 3.4m/s²(0 reviews) -
Impact WrenchITM M7 Mini Impact Wrench 1/2″ Q Series
Jumbo Hammer Type.
Q SeriesSquare Drive: 1/2″
Bolt Capacity: 5/8″ (16mm)
Torque Range: 200-350 ft-lb / 271-475 Nm
Max Torque at 5 seconds: 500 ft-lb / 678 Nm
Free Speed: 9000 RPM
Air Requirement: 4.4 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 115.5mm
Net Weight: 1.6kg
Sound Pressure: 85dBA
Vibration Level: 2.8m/s²(0 reviews) -
Air Operated ToolsITM M7 Needle Scaler 3700BPM
Needle size : 3 x 180mm (19 per set)Stroke Length: 33mm
Blows Per Minute: 3700BPM
Air Requirements: 15 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 330mm
Net Weight: 2.8kg
Sound Pressure: 97 dBA
Vibration Level: 9.7m/s²(0 reviews) -
Air Operated ToolsITM M7 Needle Scaler 5500BPM
Needle size : 3 x 123mm (12 per set).
Great compact design.Stroke Length: 32mm
Blows Per Minute: 5500BPM
Air Requirements: 3 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 290mm
Net Weight: 1.3kg
Sound Pressure: 86 dBA
Vibration Level: 7.67m/s²(0 reviews) -
Air Operated ToolsITM M7 Orbital Sander
Pad Diameter: 150mm (6″)
Free Speed: 10000RPM
Air Requirements: 3.6 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 220mm
Rated Power:0.75HP
Net Weight: 0.91kg
Sound Pressure: 92.5 dBA
Vibration Level: 3.3m/s²
Orbit: 9.5mm(0 reviews) -
Impact WrenchITM M7 Q Series Impact Wrench 3/4″ Drive
Patent grease hole makes greasing process extremely efficient.
The front housing & back head cover are constructed from magnesium alloy. While the rest of the tool is constructed from a durable composite material.
HUGE 1400 FT-LB after 5 seconds in reverse!Square Drive: 3/4″
Bolt Capacity: 1″ (25mm)
Torque Range: 200-1100 ft-lb / 271-1491 Nm
Max Torque at 5 seconds: 1400 ft-lb / 1890 Nm
Free Speed: 8500 RPM
Air Requirement: 4.8 CFM (136 LPM) / 90 PSI / 1/4″ Inlet
Overall Length: 179mm
Net Weight: 1.9kg
Sound Pressure: 85dBA
Vibration Level: 4.5m/s²(0 reviews) -
Air Operated ToolsITM M7 Ratchet Wrench 1/2″ Drive
1/2″ Square Drive Air Ratchet WrenchSquare Drive: 1/2″
Torque Range: 10-55 ft-lb / 13.5-74 Nm
Max Torque at 5 seconds: 100 ft-lb / 135.6 Nm
Free Speed: 160 RPM
Air Requirement: 4 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 280mm
Net Weight: 1.3kg
Sound Pressure: 84dBA
Vibration Level: 4.4m/s²(0 reviews) -
Power ToolsITM Pedestal Floor Drill Press
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Drilling Capacity (mm): 20mm (3/4″)
Spindle Taper: #3MT
Chuck: 5-20mm B22
Motor Power: 750W 240V
Spindle Travel (mm): 85
Speed: 12 Speed 280-2380
Swing (mm): 360
Table Size / Base Size (mm): 290×290 / 460×272
Column Diameter (mm): 80
T-Slot Size: 16mm
Height (mm): 1600
N.W. / G.W. (kg): 64 / 68Drill press vice to suit: VDP102 or VDP150
Cross slide vice to suit: TM130-100(0 reviews) -
Automotive Lifting & WorkshopITM Porta Power Body Repair Kit Hydraulic
ITM Porta Power body repair kits are perfect for auto body, frame repair and construction jobs. Manufactured with a snap lock design for fast, easy assembly and long handles for low pumping effort, they come standard with an automatic pump overload system and a range of accessories to suit many different applications
- Quality heavy duty steel construction
- Perfect for auto body, frame repair and construction jobs
- Snap lock design for fast and easy assembly
- Heavy duty hydraulics for long life and durability
- 13pce accessory kit
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
GeneralITM Pro 10 Pipe Bevelling Machine
The ITM PRO 10 PB is a European made I.D. mounted portable pipe bevelling machine. Although it is a large capacity heavy duty machine, it can be used efficiently by a single operator, weighing in at a total of just 31.5kg.
The self-centring expandable mandrels provide quick and correct alignment to pipe.
The PRO 10 PB can simultaneously perform 3 of the following operations “” internal bevel, external bevel, J-groove bevel, face off, I.D. chamfer and counterbore. Whilst the machine can be operated with just 1 cutting insert, optimal results are achieved by using 3 cutting inserts at once.
The PRO10PBE is powered by a high torque electric motor while the PRO10PBA is powered by a pneumatic motor.Package Includes:
- PRO 10 PB Bevelling Machine
- Electric or Pneumatic motor
- Mandrel for pipe 84mm I.D. to 269mm I.D.
- Jaw block set no. 1 to 6
- Toolbox & tools
- Coolant bottle
Motor: Pneumatic Motor 1.5kw
Power Requirements: 1750 l/min at 630 kPa
Spindle Speed: 20rpm
Weight: (with standard mandrel) 32.0kgMotor: Electric Motor 1.8kw
Power Requirements: 230V/50Hz
Spindle Speed: 2 Speed Gearbox With Electronic Variable Speed 12 – 28; 41 – 96rpm
Weight: (with standard mandrel) 36.0kg(0 reviews) -
GeneralITM Pro 2 Pipe Bevelling Machine
PRO 2 PB is a compact, handy pipe beveller that mills pipes made of carbon and stainless steel, aluminium alloys, and copper-nickels. As standard, it can face and bevel pipes from inner diameters (ID) of 22mm (0.87″) to outer diameters (OD) of 48mm (1.89″)
(0 reviews) -
GeneralITM Pro 40 PBS Stationary Pipe Bevelling Machine
High-speed rotary milling head with replaceable inserts. Heavy duty milling head offers accurate bevels in a fraction of the time compared to traditional single point machining. Bevel widths up to 45mm and angles between 0° and 60°. Internal bevelling and J-groove end preparation is an available option. An optional Oval Pipe attachment is available for bevelling of pipe which is not truly round.
Power supply: Single Phase 240V
External pipe diameter range: 200-1000mm Pipe Longer Than 830mm;
200-600mm Pipes Of 400-830mm Length
Maximum pipe weight: 6 000kg With Standard Plastic Rollers On Active Support
10 000kg With Optional Steel Rollers On Active Support
Min. pipe thickness: 5mm
Pipe fixing: Mechanical With Chain
Feed rate: 100 – 1100 mm/min
Bevelling angle range: 0° – 60° With Continuous Angle Adjustment
Max OD bevel width: 45mm
Max ID bevel width: 5mm Standard, Up To 20mm – Optional
Bevelling type “œJ”: YES – Optional
“œJ” type bevelling radius: 6mm or 8mm
Overall Dimensions (with a 1.4m x 1m dia. pipe): 2372mm L x 1507mm W x 1993mm H
Weight: 1100kg(0 reviews) -
GeneralITM Pro 5 Pipe Bevelling Machine
The ITM PRO 5 PB is a European made I.D. mounted pipe bevelling machine, designed for portable use by a single operator. The self-centring expandable mandrel provides quick and correct alignment to pipe or tube prior to machining operations.
The Pro 5 PB is able to simultaneously perform 3 of the following operations:
External bevel, internal bevel, face off, I.D. chamfer, J-groove bevel, and counterbore.Use any tool bit from ID 25 mm up to OD 140 mm, provided that PRO5PB is equipped with just 1 tool bit either for facing-off or for beveling “” no mater short or long.
Pipe machining range:
32mm I.D. minimum pipe capacity
114mm O.D. maximum pipe capacity
25mm I.D. minimum pipe capacity with optional small mandrel
140mm O.D. maximum pipe capacity with optional 140mm spindle disk set
12mm maximum wall thicknessPackage Includes:
- PRO 5 PB Bevelling Machine with Electric or Pneumatic Motor
- Mandrel 32mm I.D. to 107mm I.D
- 118mm spindle disc
- 3 x set of jaw blocks (1,2,3,4,5,6)
- Set of tools
- Coolant container
- Operator’s manual
Motor: Pneumatic Motor 800W
Rotational Speed: 90rpm
Air Consumption: 1600 l/min (49.4CFM)
Weight: (incl. PRO5PB) 10kg(0 reviews) -
Automotive Lifting & WorkshopITM Ratchet Jack Stand Pair
ITM ratcheting jack stands are ideal for any home garage or professional workshop and are designed to comply with the Australian Mandatory Standard AS 2538:2016. Constructed from heavy duty steel, strength and durability is guaranteed and the ratchet designs makes the job quicker and easier for the working professional
Quick and easy ratcheting height adjustment Double locking safety feature Large foot base for stability Suited for use in the professional trade workshop Deep saddle for increased coverage and grip under vehicles Reinforced shaft for added strength stability Complies with mandatory Australian standard: AS 2538:2016
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
GeneralITM SBM 500 Bevelling Machine
Stationary beveller for machining straight edges of different size workpieces. Modern design, numbers of advanced control systems and innovative solutions streamlines workflow to maximize your production efficiency.
- Edge bevelling
- Ergonomic ball roller bench
- Swarf drawer
- Supplementary tables to accommodate long workpieces
- Pipe beveling attachment for pipes 50-150 mm (2-6″) OD
- 3D contact wheel control ensures proper workpiece alignment in relation to milling head
- Very high surface quality
- High speed rotary milling head equipped with 10 inserts
- Cutting inserts dedicated to various materials
- No heat affected zones or distortion of the workpiece
- Easy access to milling head and cutting inserts
- Precise setting of bevel angle from 15 up to 60 degrees and bevel width up to 30 mm
- Continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum
Voltage: 3~ 400 VAC + N+PE, 50/60 Hz
Power: 7500 W
Spindle speed (no load): 500 – 2920 rpm
Feed rate: up to 3.3 m/min
Bevel angle range: 15 – 60° with continuous angle adjustment
Bevel width: up to 30 mm
Workpiece height: from 3 mm up to 100 mm Edge Beveling
Min. workpiece width: 50 mm
Min. workpiece length: 150 mm
Pipe OD beveling: from 50 mm up to 150 mm (option)
Weight: 850 kg(0 reviews) -
Automotive Lifting & WorkshopITM Transmission Jack Vertical 500kg
Features
ITM engine stands, cranes and transmission jacks are the perfect work mate for the professional automotive workshop. Designed to assist in lifting and supporting of transmission gearboxes in the workshop, you can easily adjust the height to accomodate different vehicles and the simple foot operated pump adjusts the working height to wear you need it. The compact design and space saving top saddle allow for safer lifting and is equipped with caster wheels for easy positioning.- Heavy duty construction
- Universal fit to most transmission/transfer cases
- Hydraulic foot pedal lift
- Caster wheels for easy positioning
Specifications
- Working Load Limit: 500kg
- Height Lowered: 1140mm
- Height Raised: 1950mm
- Net Weight: 24kg
(0 reviews)
