Storm Water Protection
Showing all 3 results
-
Storm Water Protection
Drain Guard
Flat Drain Guard 110mm x 110mm – Code TSSFDG
- The Flat Grain Guard sits underneath the stormwater grate and removes sediment and up to 98% of hydrocarbons that flow through.
- The catchment zone has an overflow space located at the top to ensure that blockages will not occur even when the filter is full.
- Simply place underneath the drain grate, attach ties to the grate for added security and trim to size.
- Standard size suitable for drains up to 1m x 1m.
- Each Flat Drain Guard will let the water run through but has two integrated Oil & Fuel Absorbent Pads that can absorb up to three litres of hydrocarbon.
- Ideal for carparks and loading dock aprons.
-
Size: 1100mmx1100mm
(0 reviews) -
Storm Water Protection
Oil/Water Filter
Disposable Oil/Water Filter – Code TSSNK1
- Removes over 99.8% of hydrocarbons
- Designed to remove hydrocarbons (oil/fuel) from waste water.
- Also effective in removing sediment from water and oily water.
- Ideal for de-watering bund pits – up to 200L p/m.
- Will remove up to 30kg of oil/fuel from water.
- Suitable for disposal into trade waste landfill.
(0 reviews) -
Storm Water Protection
Stormwater Drain Seal
Stormwater Drain Seal – Code TSSDS1
- After personal safety, the first priority when responding to a spill is to keep it on-site.
- The Drain Seal is designed to allow one person to be able to protect critical stormwater drains.
- Simply place the Drain Seal over the drain yellow side down. This yellow side is sticky and will adhere to the drain surround creating a positive seal.
- Allow a minimum of 100mm overlap around the drain gate to provide sufficient area to adhere to.
- Supplied with wall hook and bag as pictured below.
- Reusable many times over. Simply wash with warm water and soap.
- Excellent chemical resistance.
- Proudly Australian made
- Size: 810mm x 950mm
(0 reviews)