Industrial Equipment & Supplies
Showing 6877–6912 of 6991 results
-
Fuel, Grease & Oil EquipmentALEMLUBE EL SERIES GEAR OIL DRUM PUMP 20L
Alemlube O30010N
- Smooth pump action delivers 80ml on the downstroke
- Drain back nozzle holster
- Long life hose & non-drip nozzle
- Comfortable & easy to use T handle
- For use with 20L drums
- Supplied complete with a Reike adaptor
(0 reviews) -
Fuel, Grease & Oil EquipmentALEMLUBE EL SERIES GREASE KIT 20kg
Alemlube G100120
- Effortless greasing
- Heavy duty grease control valve
- 4m long hose assembly
- Affordable and robust
- Delivers up to 600g/min
- Tested to up to 24,000kg
- Maximum fluid pressure of 5,800psi (400bar)
- All types of grease up to NLGI2
- Air consumption of 3.6cfm at 150psi
- Air inlet pressure from 70psi (5bar) to 150psi (10bar)
- Noise level of 82dB
- Low cost of ownership
- Spare parts readily available
- Drum not included
(0 reviews) -
Accessories & PartsElectrical Lead Stand
- Steel base and stand
- Plastic non-conductive lead holder
(0 reviews) -
HarnessesSKYLOTEC Ignite Nucleon Harness
This full-featured fall arrest and restraint harness with skid plate and arrester eyelet was developed specifically for wind energy, but it is also used in many other fields such as telecoms, power and construction where the highest standards of safety and functionality apply. IGNITE NUCLEON scores with a breathable hip pad that distributes the load evenly on the hip and is protected against abrasion from the outside with a protective sliding plate. The correct position of the sternal and dorsal fall arrest eyelet can be perfectly adjusted to the user. Leg pads are interchangeable if required. An integrated fall indicator and innovative stainless steel OKTALOCK buckles provide additional safety. Excess webbing is no longer a nuisance thanks to practical webbing fixation. The material loops and tool eyelets are used to accommodate tools.
- Lightweight and comfortable to wear.
- Sliding plate against abrasion.
- Breathable hip pads.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HarnessesSKYLOTEC Ignite Proton Wind Harness
The IGNITE PROTON WIND features all the same attributes as the PROTON but with the following additions to this already‚ state of the art harness:
· Synthetic rear protection plate on the rear of the AIRPAD waist belt. Provides protection to the AIRPAD in the tight confines of a wind turbine ladder or even general work at height applications.
· Chest eyelet for belay, but also for rescue
· Alloy Dorsal & Sternal attachment points
· Alloy Limited Fall Arrest attachment point on the centre front of the waist belt.
· Adjustable Confined Space loops
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Marking, Tagging & AccessoriesDYMARK Engineering Chalk
- Economical and semi-permanent marking
- Ideal for industrial grade applications
- Quick and easy to layout jobs
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Eye Bolt DIN580 Zinc
Eye bolts DIN580 are generally used as a removable lifting point where a rated female thread or nut can be utilised also can be used as a termination for chain, wire rope and other assembles where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish, manufactured with a standard larger eye. Only available in metric thread sizes.
• Conforms to DIN580 and DIN582 marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Eye Nut DIN582 Zinc
Eye Nut DIN 582 are generally used as a removable lifting point where a rated nut can be utilised. Also can be used as a termination for chain, wire rope and other assemblies where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish,manufactured with a standard larger eye. Only availablein metric thread sizes.
• Conforms to DIN 582, marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Air Line CouplersITM Female Thread Plug
THB Female Thread Plug Air Line Couplers – 1/4″, 3/8″ & 1/2″
Approximate air flow : 1500 L/M (53 CFM) at 85 PSI
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Air Line CouplersITM Female Thread Socket
THB Female Thread Sockets Air Line Couplers – 1/4″, 3/8″ & 1/2″
Approximate air flow : 1500 L/M (53 CFM) at 85 PSI
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
Construction TradesFoam Joint Sticky Back 150mmx25m
Sticky Back Foam Expansion Joint 150mm x 25m
(0 reviews) -
Packaging SuppliesFoam Wrap 2mm 1200mmx100m
Foam Wrap
Thickness: 2mm
Roll Width & Length: 1200mm x 100m
PICK UP / FREE LOCAL DELIVERY TO GOULBURN
(0 reviews) -
Fuel, Grease & Oil EquipmentALEMLUBE GEAR OIL DRUM PUMP 20L
Alemlube 8828N2
- Capable of delivering up to 70mL per stroke
- Downtube extension and extra Rieke adaptor make the pump suitable for use with a variety of 20L drums available on the market
- Ideal pump for the transfer of engine, gear, diff and hydraulic oils in busy vehicle servicing workshops
- Drainback nozzle holster ensures that excess oil ends up back in the drum
- Incorporates a filter in the drain back holster to protect against foreign particle contamination
- UV stabilised long life hose ensures a long service life
(0 reviews) -
Fuel, Grease & Oil EquipmentALEMLUBE GREASE GUN FLEXIBLE EXTENSION 30CM
Alemlube 14551
- Industrial quality, genuinely high pressure, high flexibility grease gun flex
- Minimum burst pressure of 14,500psi (1,000bar)
- Polyamide hose maximises product life
- Made in Germany
(0 reviews) -
Fuel, Grease & Oil EquipmentALEMLUBE GREASE GUN FLEXIBLE EXTENSION 70CM
Alemlube 14553
- Industrial quality, genuinely high pressure, high flexibility grease gun flex
- Minimum burst pressure of 14,500psi (1,000bar)
- Polyamide hose maximises product life
- Made in Germany
(0 reviews) -
Marking, Tagging & AccessoriesDYMARK Handle Long Arm
Dy-Mark Long Arm Handle (Code 40080105)
- Gives you that extra reach when you need it
- Assists in preventing back strain
- Improves efficiency and makes application less fatiguing
- Lightweight aluminium construction
- Suitable for use with Spray & Mark and Landscape Chalk aerosols
(0 reviews) -
Air Line CouplersITM Hose Tail Plug
THB Hose Tail Plug Air Line Couplers – 1/4″, 3/8″ & 1/2″
Approximate air flow : 1500 L/M (53 CFM) at 85 PSI
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Air Line CouplersITM Hose Tail Socket
THB Hose Tail Sockets Air Line Couplers – 1/4″, 3/8″ & 1/2″
Approximate air flow : 1500 L/M (53 CFM) at 85 PSI
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hose Reels, Fittings & AccessoriesALEMLUBE HR40050 WATER HOSE REEL – EL SERIES 20m x 12mm
Alemlube HR40050
- Supplied complete with 20m x 12mm ID PVC hose and 1.2m lead in hose
- Increase safety by reducing rewind speed by up to 80%
- High quality impact and UV resistant polypropylene covers
- 3/4” BSPT inlet/outlet
- Maximum working pressure of 300psi (20bar)
- Automatic and positive latching system
- Hose guide system rewinds the hose without kinks
- Constant speed control device ensures safe hose assembly rewind
- Convenient carry handle facilitates portable use
- Can be wall, ceiling or floor mounted
- Lightweight, compact and durable construction
- Control hose whip hazard
(0 reviews) -
Marking, Tagging & AccessoriesDYMARK Ink Marker i70
Dy-Mark Permanent Ink Marker i70
Industrial strength ink – Medium Tip 0.8mm to 1.8mm
Sold Individually
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Marking, Tagging & AccessoriesDYMARK Ink Marker iFine
Dy-Mark Permanent Ink Marker iFine
Industrial strength ink – Fine/Medium Tip 0.5mm to 1.8mm
Sold Individually
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cable TiesAUSTLIFT Inspection Cable Ties
Test and tag colours (RGBY system) for construction and demolition. For anyone that works in demolition or on construction sites – there are particular tag colours you are required to use in different months of the year according to AS/NZS 3012. It is referred to as RGBY, which represents the colours red, green, blue and yellow.
RED: January/February/March
GREEN: April/May/June
BLUE: July/August/September
YELLOW: October/November/December
- Product Code: ALC09001SP
- Qty/100
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Anti Slip SurfacesADVANCE ANTI SLIP Ladder Products – Ladder Rung Covers
Anti-Slip Surfaces – Ladder Rung Covers
Custom Sizing Available
Made to Order
Price on Application
(0 reviews) -
Beacons & LightsADVANCE GLOBAL LED Beacon 10-30V – Magnetic Mount
The LED Ninja Beacon series is an ultra-high-quality range featuring Class 1 level light output for total compliance in transport or site applications. Small but fierce! This Magnetic Ninja beacon packs a punch. The ultrasonically sealed IP67 lens and body design ensure total protection from water or fine dust. Built for heavy-duty applications, the BE325 series is available in various mounting options as well as a lithium self-powered portable option.
- Small but fierce!
- 7 Flash modes
- Shock Resistant
- LED IP Rating: Full Sealed Weatherproof IP67
- 10-30V
- Compliance: SAE J845 Class 1
- Magnetic base
(0 reviews) -
Beacons & LightsADVANCE GLOBAL LED Beacon 10-30V – Pole Mount
The LED Ninja Beacon series is an ultra-high-quality range featuring Class 1 level light output for total compliance in transport or site applications. Small but fierce! This Pole Mount Ninja beacon packs a punch. The ultrasonically sealed IP67 lens and body design ensure total protection from water or fine dust. Built for heavy-duty applications, the BE325 series is available in various mounting options as well as a lithium self-powered portable option.
- Small but fierce!
- 7 Flash modes
- Shock Resistant
- LED
- IP Rating: Full Sealed Weatherproof IP67
- 10-30V
- Compliance: SAE J845 Class 1
- Pole mount
(0 reviews) -
Beacons & LightsADVANCE GLOBAL LED Beacon 10-30V – Stud Mount
The BE250-ST is the next advancement in LED Beacons technology with it’s ECE Class 1 rating and ECE R10 (EMI Compliant). Featuring 10 selectable flash patterns, low profile design, low amp draw and power consumption, these beacons are ideal for emergency, construction and motorists, police, fire and EMS personnel as well as marine applications.
- E marked (ECE R65 Class 1) and ECC R10 EMI compliant
- Stud base or magnetic base options
- Low current draw
- Adjustable flash patterns
- IP67 weatherproof protection rating and fully sealed
- 360 degrees light distribution
(0 reviews) -
Beacons & LightsADVANCE GLOBAL LED BEACON 10-30V – PORTABLE MAGNETIC
The LED Ninja Beacon series is an ultra-high-quality range featuring Class 1 level light output for total compliance in transport or site applications. Small but fierce! This Portable Magnetic beacon packs a punch. The ultrasonically sealed IP67 lens and body design ensure total protection from water or fine dust. Built for heavy-duty applications, the BE325 series is available in various mounting options as well as a lithium self-powered portable option.
- Small but fierce!
- 7 Flash modes
- Shock Resistant
- LED
- IP Rating: Full Sealed Weatherproof IP67
- 10-30V
- Compliance: SAE J845 Class 1
- Portable and magnetic
- Rechargeable
(0 reviews) -
Fuel, Grease & Oil EquipmentALEMLUBE LEVER ACTION GREASE GUN 600A
Alemlube 600A
- Grease pressures of up to 12,000psi (828bar)
- Delivers up to 1.6g of grease per stroke
- 450g capacity
- Suitable for all grease grades up to NLGI3
- Twin Lock System seals the piston and eliminates the possibility of dummy lubrication
- Ever-Flow System enables the use of thick/tacky greases
- Coarse thread on barrel assembly eliminates the possibility of cross threading
- Three way loading
- Bulk filling capacity of 500g
- Light weight aluminium die cast head assembly
- 4 jaw coupler & rigid extension
- Empty weight of 1.56kg
- Plastic wing nut enables the rigid extension to be locked at the required angle
- Large diameter piston with a long lever travel facilitates high volume greasing
- High volume, high pressure greasing guaranteed
- Manufactured in Germany
(0 reviews) -
LiftingAUSTLIFT Lever Block AL-3
Austlift L-3 series lever blocks are used for general hoisting in the mining, construction, industrial and domestic situations. Commonly used for short lifts and pulling applications.
• Standard height of lift 1.5 or 3M except for 250kg which has 1 metre lift. Other lift height available upon request.
• Robust, durable, portable and compact in construction.
• All lever blocks come with ball bearing swivel hook.Available in WLL: 0.25T, 0.5T, 0.8T, 1.6T, 3.2T
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load RestraintAUSTLIFT Loadbinder Ratchet Wing Grab Hook
Ratchet style load binder with winged grab hooks combined with Grade 70 chain are an effective way to restraint heavy loads for transport operations, With the benefit of high pretension and the added safety of screw stops to ensure full thread contact while in use.
• Manufactured from dropped forged steel quenched and tempered.
• Marked with chain size, lashing capacity, grade, batch numbered and branded Austlift for traceability.• All load binders come with swivel winged grab hooks to achieve full lashing capacity.
Chain sizes: 6mm, 8mm, 10mm, 13mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Air Line CouplersITM Male Thread Plug
THB Male Thread Plugs Air Line Couplers – 1/4″, 3/8″ & 1/2″
Approximate air flow : 1500 L/M (53 CFM) at 85 PSI
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Air Line CouplersITM Male Thread Socket
THB Male Thread Sockets Air Line Couplers – 1/4″, 3/8″ & 1/2″
Approximate air flow : 1500 L/M (53 CFM) at 85 PSI
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load RestraintAUSTLIFT Maxibinder (AusBinder V3) with Swivel Head
Code 202704 – 6mm – Lashing Capacity 2300kg
Code 202705 – 8mm – Lashing Capacity 3800kg
• Ergonomically designed.
• High pre-tensioning force.
• 1/8 Chain link length adjustment.
• Alloy steel, heat treated for durability.
• Conforms to AS/NZ4344 standard.
• Multiple purposes.
• Designed for higher pre-tensioning strength.
• Designed and manufactured by Australian Lifting Centre.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Spill Response KitsMSDS / PPE Pouch
Material Safety Data Sheets / Personal Protection Equipment Pouch – Code XPPS
Store MSDS on one side & PPE on other side of pouch for easy access when required.
Dimensions:
- Length: 39cm
- Width: 29.5cm
(0 reviews)
