Workshop Tools
Showing 865–900 of 962 results
-
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 750W
With its compact size, this TradeQuip “Made for the Trade” Portable Evaporative Cooling unit is perfectly suited to smaller work areas, yet still delivers an impressive amount of air output. Huge in performance, this easy-to-operate unit produces up to 23,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- LCD 24hour timer panel
- Nylon castors for easy portability
- Remote control speed adjustment
Specifications
- Power Unit: 240V 50Hz 750W 10amp plug
- Max. Air Flow: 23,000 m3 per hour
- Noise Level: 70dB(A)
- Fan Diameter: 750mm (5 Blade)
- Speed Control: 3-speed
- Effective Cooling Area: 150-200m2
- Water Consumption; 10-15 Litres per hour
- Water Tank Capacity: 130 Litres
- Castor Wheels: 100mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1730(H) x 1120(W) x 680(D)
- Nett Weight: 63kg
- Carton: 1130 x 680 x 1590mm
- Gross Weight 68kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler 750W
Using the process of evaporation, this TradeQuip “Made for the Trade” Portable Direct Drive 3-Speed Cooling Unit will cool the air up to 10°C in all large hard-to-cool working areas. The one-piece moulded polyethylene housing will not crack, leak and is rugged enough for any workshop or outdoor environment. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C.
Ideal for cooling high performance vehicles when used with Dynometers.
An evaporative cooler (also known as a desert cooler, swamp cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of large workshops, factories, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional A/C
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Water level sight tube
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- Durable and long lasting
- Nylon castors for easy portability
- Remote control speed adjustment
- Low installation and maintenance costs
- 75% less electricity usage
- Adds moisture to the air, for dry environments
- No ozone damaging refrigerants
Specifications
- Power Unit: 240V 50Hz 750W 10amp plug
- Max. Air Flow: 23,000m3
- Noise Level: 75dB(A)
- Fan Diameter: 900mm
- Speed Control: 3-speed
- Cooling Area: 200-260m2
- Water Consumption; 20-35 Litres per hour
- Water Tank Capacity: 200 Litres
- Castor Wheels: 150mm Dia (4 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1800(H) x 1600(W) x 780(D)
- Net Weight: 128kg
- Carton: 1800 x 1600 x 780mm
- Gross Weight 130kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler Cover
This TradeQuip Protective Cover keeps TradeQuip Portable Evaporative Coolers clean, protected and dust-free when not in use. This economical and effective cover is made from durable black fabric. The low-profile design is compatible with TradeQuip 1027T, 1028T and 1035T models.
- Water-resistant fabric
- Lightweight and breathable
- UV treated
- Easy to use
Intended Use:
To protect 1027T and 1035T TradeQuip Portable Evaporative Coolers when not in use.
About the TradeQuip brand
The ‘TradeQuip’ brand of workshop equipment, is designed for use in a demanding workshop environment by professional users. With proven and trusted “Made for the Trade” reliability, ‘TradeQuip’ branded products offer the very best in performance for an affordable price. All backed by a 1year trade guarantee across 1,000+ distributors Australia wide.
(0 reviews) -
Vices & AnvilsTQB BRANDS Fabricated Steel Offset Vice 150mm
This TradeQuip “Made for the Trade” Engineers Vice is designed for all heavy duty work and manufactured from heavy steel plate. Precision machined surfaces ensures a long life smooth operation with case hardened replaceable steel jaws, replaceable nut, corrosion resistant screw and handle. The offset design offers the convenience to hold a long vertical workpiece in the full width of the jaws without obstruction from the main body of the vice. This is an all steel fabricated offset bench vice, manufactured from heavy steel plate and strong welded finish. The surface hardened slides provide a smooth, precise and efficient operation. (Previous models include product code/s; 7007).
Features
- Offset jaws allow the workpiece to be held in a vertical position
- Fixed offset base – right hand
- Solid fabricated steel construction
- 4 mounting holes (13mm Dia)
Specifications
- Jaw Width: 150mm / 6″
- Throat Depth: 103mm
- Overall Width: 245mm
- Overall Height: 194mm
- Maximum Opening: 140mm
- Overall Length: (closed jaw) 475mm
- Net Weight: 21kg
- Carton: 510 x 295 x 210mm
- Gross Weight: 26kg
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS FWD Wheel Bearing Kit
This versatile TradeQuip Universal FWD Wheel Bearing Kit includes everything you need to remove and install bushes, bearings and seals. Constructed from heat-treated forged high carbon steel, this durable set is perfect for the removal and installation for Bearing bushes ,Silent bearing, Hydraulic bearing and Rubber bearing. This units comes in an individually organised carrying case, making it perfect for both the automotive professional or serious DIY enthusiast. The professional “Made for the Trade” 23pce FWD Wheel Bearing Kit has applications across several industries.
Features- 23 Piece Set Constructed from heat-treated forged carbon steel
- Sturdy Blow Mould Case
Specifications
- Hub Screw Length: 207mm
- Hub Screw Drive: 32; 38mm
- Sleeve External: 76.5 x 65; 86 x 77; 91 x 81.5; 102 x 92mm
- Drift Sizes: 50; 55; 59; 63; 66.5; 70; 71.5; 73; 73.5; 75, 77.5; 81.4; 83.3; 86; 88.4; 102mm
Intended Use
This FWD WHEEL BEARING KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery
(0 reviews) -
Blasting EquipmentTQB BRANDS Garnet Blasting Media Abrasive 20/40
TradeQuip “Made for the Trade” Garnet Blasting Media Abrasive is designed for use in conjunction with our TradeQuip Mobile Blasting Kits and Blasting Cabinets. Garnet is a gemstone with excellent naturally abrasive properties. This hard abrasive is fast-cutting, low-dust producing and low-consuming, ideal for removing tough coatings, paint, rust and mill scale from steel. Garnet also permits precise feathering control. A good general outdoor surface preparation abrasive. It has been specified for use with TradeQuip “Made for the Trade” blasting equipment.
Features
- Fast removal of heavy rust and stubborn paint coatings
- Low consumption rate
- Deep etching
- Used for general maintenance and cleaning
- Ideal for preparation of most automotive and industrial coatings
- Widely used for car panel sandblasting and metal cleaning
Specifications
- Mesh: 20/40
- Dust Factor: Low
- Recyclability: 5/10
- Profile Range: 50-85 μm
- Blasting Rate: 15-20 sqm per hour
- Consumption Rate: 8-10kg per sqm
- Weight: 25kg
NOTE: We recommend the use of personal protective equipment. Always wear a respiratory filter or mask over your mouth when operating this unit. You will create a cloud of abrasive media material and debris which should not be inhaled
Choosing the right abrasive media
Garnet
Garnet is one of the last few abrasives that are naturally mined. It is an industrial gemstone that creates a profile virtually free of embedment, which makes it excellent for coating adhesion, as well as applications where low or no transfer of grit into the substrate can be tolerated. Garnet is generally used when paint, rust, and scale have to be removed from steel, such as car/truck frames, tanks, heavy machinery, farm equipment, etc. Garnet is one of the most economical abrasive and is the best choice for large blast projects. Best uses: rust removal, heavy scale removal, paint and coatings removal on heavy-gauge steel.
(0 reviews) -
Blasting Equipment
TQB BRANDS Garnet Blasting Media Abrasive 30/60
The TradeQuip “Made for the Trade” Garnet Blasting Media Abrasive is designed for use in conjunction with our TradeQuip Mobile Blasting Kits and Blasting Cabinets. Garnet is a gemstone with excellent naturally abrasive properties. This hard abrasive is fast-cutting, low-dust producing and low-consuming, ideal for removing tough coatings, paint, rust and mill scale from steel. Garnet also permits precise feathering control. A good general outdoor surface preparation abrasive. It has been specified for use with TradeQuip “Made for the Trade” blasting equipment.
Features
- Fast removal of medium rust and paint
- Low consumption rate
- Ideal for tough coatings and removing mill scale
- Used for general outdoor surface preparation
- Ideal for preparation of most automotive and industrial coatings
- Widely used for car panel sandblasting, machinery cleaning, parts restoration
Specifications
- Mesh: 30/60
- Shape: Sub Angular
- Hardness: 7.0 – 7.5 MOHS
- Density: 3.5-4.3 SG
- Blasting Speed: Up to 32.5 m2/hr
- Dust Factor: Low
- Recyclability: 5/10
- Profile Range: 63 – 82.5 µ
- Consumption Rate: 7.3-14kg/m2
- Weight: 25kg
NOTE: We recommend the use of personal protective equipment. Always wear a respiratory filter or mask over your mouth when operating this unit. You will create a cloud of abrasive media material and debris which should not be inhaled.
Choosing the right abrasive media
Garnet
Garnet is one of the last few abrasives that are naturally mined. It is an industrial gemstone that creates a profile virtually free of embedment, which makes it excellent for coating adhesion, as well as applications where low or no transfer of grit into the substrate can be tolerated. Garnet is generally used when paint, rust, and scale have to be removed from steel, such as car/truck frames, tanks, heavy machinery, farm equipment, etc. Garnet is one of the most economical abrasive and is the best choice for large blast projects. Best uses: rust removal, heavy scale removal, paint and coatings removal on heavy-gauge steel.
(0 reviews) -
Blasting EquipmentTQB BRANDS Glass Beads Media Abrasive
The TradeQuip “Made for the Trade” Glass Bead Blasting Media Abrasive is designed for use in conjunction with our TradeQuip Mobile Blasting Kits and Blasting Cabinets. Glass beads are used for general cleaning, peening and cosmetic finishing of sensitive metal surfaces; removing automotive paint; brightening grout and removing fungus and calcium deposits from tile; polishing cast iron, stainless steel, aluminium, propellers and turbine blades. Glass Beads are environmentally friendly and can be used in many blast applications to provide a finish with no profile. Use while working with metal, plastic or rubber materials to clean, debur and finish. It has been specified for use with TradeQuip “Made for the Trade blasting equipment.
Features
- Ideal for cosmetic finishing of sensitive materials
- Low consumption rate
- Can be recycled
- No contamination of metal being treated
- Broad range of applications
- Used for general maintenance and cleaning
- Ideal for tile cleaning and brightening grout
- Widely used for car panel sandblasting, machinery cleaning, parts restoration
Specifications
- Mesh: 106/300
- Shape: Rounded
- Hardness: 5.5 – 6.0 MOHS
- Density: 2.5 SG
- Blasting Speed: Up to 3.7 m2/hr
- Dust Factor: Nil
- Recyclability: 7/10
- Profile Range: 6.35 – 25.4 µ
- Consumption Rate: N/A
- Weight: 25kg
NOTE: We recommend the use of personal protective equipment. Always wear a respiratory filter or mask over your mouth when operating this unit. You will create a cloud of abrasive media material and debris which should not be inhaled.
Choosing the right abrasive media
Crushed Glass
Crushed Glass or Glass Beads would have to be one of the most popular forms of blast media and can be used on a variety of dustless blasting and abrasive blasting projects across all industry sectors. Using crushed glass means you know you are using a eco friendly and recycled product that helps the environment. If you’re looking to achieve a smooth, bright finish, glass beads can be your best option. Glass beads are also recyclable and can be used up to 100 times before replacement, making them an extremely cost-effective option. Glass bead media works well on soft metals like aluminium and brass as well as plastic. Works with a blasting gun or in a blast cabinet.
(0 reviews) -
Trolleys & CreepersTQB BRANDS Heavy Duty Wide-Track Creeper 180kg
The eQuipt “Designed to Deliver” heavy duty wide-track creeper is ideal for use in commercial premises such as mechanics and panel beaters workshops, car dealerships, as well as home garages. Built for reliability, this heavy-duty creeper features a robust 180kg load capacity. The wide-track design includes a vinyl cushion with dedicated padded support for the head, neck, and lumbar regions. Four smooth-rolling 130mm swivel castors provide effortless maneuverability and stability on workshop floors.
Features
- Wide vinyl cushion
- Padded head, neck and lumbar support
- Four smooth-rolling 5” swivel castors
Specifications
- Safe Working Capacity: 180kg
- Swivel Castors: 4 x 130mm
- Dimensions: 1110(L) x 480(W) x 175(H)mm
- Carton: 1030 x 500 x 90mm
- Weight: 9kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Press 30,000kg
This “Borum” “Industrial” 30,000kg Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. The high quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to compress the load, helping to reduce wear and extend service life. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear. A polished and chromed cylinder ram and piston is guided by superior performance seals, wear rings and dust seals. Fitted with an integrated overload protection valve the ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed. Designed with a superior quality oil filled dial gauge for accurate dual metric/tons pressure readings. To protect the operator against unexpected hazards during operation, this press is fitted with a heavy duty safety guard. Made of steel mesh in a mild steel frame it provides operator safety and visibility.
“Borum” “Industrial” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “Borum” “Industrial” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! (Previous models include product code/s; BPROSP30T)
Features:
- Heavy-duty H-frame manufactured of superior-grade steel to exacting standards for industrial quality and durability
- 2 speed foot & hand pump operates the ram at a slow or fast speed to improve operator efficiency
- Non-slip bed winch and steel cable roller offers easy raising and lowering of the press bed
- Steel mesh safety cage provides operator safety and visibility
- 100mm pressure gauge ensures accurate monitoring
- Superior quality hydraulic cylinder unit requires lower oil pressure to apply load, reducing wear and extending service life
- Treated & polished ram is fitted with heavy duty backup ring, preventing bypass oil drift
- Superior quality hydraulic oil, improves corrosion resistance and high/low temperature flexibility
- Integrated overload protection eliminates overloading
- Double spring ram return for fast ram retraction
- Lead-free paint for a long-lasting finish and to minimise corrosion
- Oil, grease and dirt-resistant paint finish for easy cleanup
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 151-1031mm
- Overall Height: 1830mm
- Overall Width: 865mm
- Overall Depth: 700mm
- Bed Inside: 164mm
- Bed Width: 535mm
- Bed Surface Depth: 184mm
- Width Between Side Posts: 140mm
- Piston Ram Stroke: 150mm
- Ram Diameter: 80mm
- Bed Height Settings: 8
- Nett Weight: 182kg
- Crate: 1920 x 780 x 270mm
- Gross Weight: 203kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Press 45,000kg
This “TradeQuip “Made for the Trade” 45,000kg Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 826mm bed width and 195mm inside bed gap this press becomes one of the most diverse Workshop Press in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
“TradeQuip “Made for the Trade” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “TradeQuip “Made for the Trade” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features:
- Heavy-duty high-grade steel frame
- 100mm pressure gauge
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish to help prevent rust
- Paint is oil, grease and dirt-resistant
- Hand winch for fast height adjustment
Specifications:
- Safe Working Capacity: 45,000kg
- Working Range: 159-859mm
- Overall Height: 1707mm
- Overall Width: 1420mm
- Overall Depth: 826mm
- Width Between Side Posts: 186mm
- Bed Surface Depth: 359mm
- Bed Inside: 195mm
- Bed Width: 826mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 90mm
- Bed Height Settings: 6
- Nett Weight: 296kg
- Carton: 1040 x 390 x 1900mm
- Gross Weight: 335kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Porta Powers & Panel RepairTQB BRANDS Hydraulic Ram Kit
This TradeQuip “Made for the Trade” Hydraulic Ram Kit includes 2 puller rams and 5 pusher rams for lifting, pushing, pulling, bending, and straightening. A must for a variety of auto body, frame repair, and construction jobs. Ram and cylinder bearings are designed for protection against off-centre load stresses. High flow quick-connect coupler with dust cap. (Previous models include product code/s; RAMKIT)
TradeQuip quality multi-purpose hydraulic rams are used for automotive, truck, farm and heavy equipment repair. Quality steel design with high gloss enamel coating for durability and longevity.
* Requires hydraulic pump, hoses and fittings, sold separately.
Features
- Used for pulling, pushing, bending, lifting, straightening and spreading operations in auto body and heavy equipment frame repair
- Hardened, heat treated steel design for durability and long service life
- High gloss enamel coating to prevent corrosion
- Uses a common 1/4″ NPT attachment to connect to a hydraulic pump for up to 10,000kg of pneumatic power
- Comes in blow mould case for convenient organisation and storage
- Individual rams available separately
- Can be used with TradeQuip 2054T (requires adaptors, sold separately)
Set Includes:
Non-spring Return
- 2,000kg Mini Ram – Compressed 139mm > Stroke 76mm > Working Pressure 5792psi
- 4,000kg Mini Ram – Compressed 42mm > Stroke 16mm > Working Pressure 9235psi
Spring Return
- 10,000kg Mini Ram – Compressed 118mm > Stroke 60mm > Working Pressure 8939psi
- 4,000kg Porta Power Ram – Compressed 276mm > Stroke 132mm > Working Pressure 8045psi
- 10,000kg Porta Power Ram – Compressed 350mm > Stroke 150mm > Working Pressure 8045psi
- 2,000kg Pull Back Ram – Extended 409mm > Stroke 128mm > Working Pressure 7887psi
- 5,000kg Pull Back Ram – Extended 483mm > Stroke 130mm > Working Pressure 9669psi
- 2 x 2,000kg 360º Swivel Double-End Hooks
- 2 x 5,000kg 360º Swivel Double-End Hooks
- Blow Mould Carry Case: 530 x 500 x 110mm
- Weight: 24kg
- Carton: 700 x 485 x 125mm
Intended Use
For medium duty applications when used in conjunction with a good quality manual hydraulic pump, hose and fittings.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Workshop Press 20,000kg
The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.
(Previous models include product code/s; 1069T)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished for extended life
- Reinforced head bolster for added strength
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 20,000kg
- Working Range: 43 – 882mm
- Overall Height: 1795mm
- Overall Width: 780mm
- Overall Depth: 690mm
- Bed Width: 505mm
- Bed Gap: 105mm
- Bed Inside Working Area: 358 x 105mm
- Press Head Cap Diameter: 45mm
- Press Head Cap Length: 17mm
- Piston Ram Stroke: 185mm
- Ram Lateral Adjustment: 180mm
- Nett Weight: 90kg
- Crate: 1550 x 280 x 240mm
- Gross Weight: 110kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Workshop Press 30,000kg
The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.
(Previous models include product code/s; 1070T)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished for extended life
- Reinforced head bolster for added strength
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 50 – 1030mm
- Overall Height: 1950mm
- Overall Width: 830mm
- Overall Depth: 660mm
- Bed Width: 455mm
- Bed Gap: 154mm
- Bed Inside Working Area: 230 x 154mm
- Bed Cage Bolt Holes: 422 x 80mm
- Press Head Diameter: 56mm
- Load Cap Length: 17mm
- Jacking Handle Length: 639mm
- Ram Lateral Adjustment: 70mm
- Piston Ram Stroke: 170mm
- Nett Weight: 138kg
- Crate: 1700 x 510 x 300mm
- Gross Weight: 168kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Parts WashersTQB BRANDS Jet Blast Parts Washer with Heating System
The TradeQuip Jet Blast Parts Washer with Heating System is designed to deliver fast, efficient, and professional cleaning of automotive, industrial, and machinery components. Combining heated water-based cleaning fluid, compressed air, and an integrated cleaning gun, it removes grease, oil, and contaminants with minimal effort while providing a safer alternative to solvent-based cleaning.
Built with a durable steel cabinet, large working area, and adjustable digital temperature control up to 60°C, the Parts Washer improves cleaning performance by using heated cleaning fluid to break down stubborn deposits. The enclosed cabinet design, integrated LED lighting, ventilation fan, and air drying function provide a clean, efficient workspace while helping to reduce mess and improve operator visibility.
Ideal for professional workshops, maintenance facilities, and industrial environments, the Jet Blast Parts Washer is suitable for cleaning engine components, transmissions, gearboxes, bearings, suspension parts, and a wide range of mechanical assemblies.
Features
- Heated water-based cleaning system with adjustable temperature up to 60°C.
- Powerful cleaning gun and compressed air drying function.
- Integrated LED lighting and ventilation fan for improved visibility.
- Large enclosed cleaning cabinet helps contain overspray.
- Digital temperature controller for precise heating control.
- Durable steel construction for long service life.
- Designed for use with non-flammable, water-based cleaning solutions.
Specifications
- Cleaning Fluid Capacity: 8–14 L
- Heating Temperature: Up to 60°C
- Working Pressure: 70–120 PSI
- Overall Dimensions: 820 × 610 × 1335 mm
- Working Area: 737 × 559 × 452 mm
(0 reviews) -
Trolleys & CreepersTQB BRANDS Low Profile Foldable Creeper 150kg
eQuipt “Designed to Deliver” space-saving foldable creeper features a low-profile design and a robust 150kg load capacity for demanding workshop environments. The oil and solvent-resistant finish is easy to clean and rust-proof, ensuring long-lasting durability in commercial settings. Six smooth-rolling swivel castors provide excellent maneuverability, while the padded headrest ensures operator comfort during use. Its unique foldable construction allows for compact storage, making it an ideal choice for mechanics, car dealerships, and home garages.
Features
- Oil and solvent resistant
- Easy to clean finish
- Won’t rust
- Padded headrest
- Six smooth rolling swivel castors
Specifications
- Safe Working Capacity: 150kg
- Swivel Castors: 6 x 76mm
- Open Dimensions: 1070(L) x 550(W) x 130(H)mm
- Closed Dimensions: 580(L) x 550(W) x 175(H)mm
- Weight: 9kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Master Press & Pull Set
This versatile TradeQuip Universal Press and Pull Sleeve Kit includes everything you need to remove and install bushes, bearings and seals. Constructed from heat-treated forged high carbon steel, this durable set is perfect for the removal and installation for Bearing bushes ,Silent bearing, Hydraulic bearing and Rubber bearing. This units comes in an individually organised carrying case, making it perfect for both the automotive professional or serious DIY enthusiast. The professional “Made for the Trade” 28pce Press and Pull Sleeve Kit has applications across several industries.
Features- 20 Sleeves Constructed from heat-treated forged carbon steel
- Sturdy Blow Mould Case
Specifications
- 4 x Step Plates: 74, 76, 78, 80mm
- 4 x Pulling Spindles With Thrust Bearings (10mm, 12mm, 14mm & 16mm)
- 20 x Press Sleeves: 44 x 43; 46 x 36; 48 x 38; 50 x 40; 52 x 42; 54 x 44; 56 x 46; 58 x 48; 60 x 50; 62 x 52; 64 x 54; 66 x 56; 68 x 58; 70 x 60; 72 x 62; 74 x 64; 76 x 66; 78 x 68; 80 x 70; 82 x 72mm
Intended Use
This Master PRESS & PULL KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery
(0 reviews) -
Trolleys & CreepersTQB BRANDS Mechanics Creeper
The TradeQuip “Made for the Trade” low profile moulded mechanics creeper comes complete with 6 x 75mm high quality swivel castors for easy manoeuvring. This creeper is equipped with a thick padded cushion headrest for extra comfort and two convenient side moulded tool trays. This trade quality model is moulded from tough high impact polymer, features comfortable ergonomic shoulder recesses and an integrated carrying handle. Glide just 100mm above the ground in this lightweight low-riding mechanics creeper. The durable rubber/nylon offset-centre castors with ball-bearing swivelling wheels roll smoothly across the workshop floor and turn easily for ultimate maneuverability.
Easily clear the undercarriage of most vehicles with this low-profile mechanics creeper. The creeper body is manufactured to “Made for the Trade” quality using a high-impact polymer material that resists impacts, won’t rust and is easy to clean. With a comfortable padded headrest and load capacity of up to 130kg, this low-profile creeper is one of the lightest and most durable available to the Australian Automotive Repair market.
Features- Monoque high impact resistant polymer plastic design
- Oil and solvent resistant
- Easy to clean finish
- Won’t rust
- Padded headrest
- Six smooth-rolling swivel castors
- Built-in tool storage trays
Specifications
- Safe Working Capacity: 130kg
- Swivel Castors: 6 x 75mm
- Dimensions: 1010(L) x 475(W) x 115(H)mm
- Replacement Castors: Code# 1023-1
- Carton: 1030 x 500 x 90mm
- Weight: 6kg
(0 reviews) -
Trolleys & CreepersTQB BRANDS Mechanics Creeper Caddy
This very handy TradeQuip “Made for the Trade” Creeper Caddy keeps nuts, bolts and small tools within reach with its convenient compartments and handy handles. With 2 large and 3 small compartments, organising your next under-car challenge just got easier. The durable ABS impact resistant polymer tray is 50mm tall by 450mm across and 400mm wide and rides on 50mm swivel castors.
Features- Easy to clean finish
- Oil and solvent resistant
- Won’t rust
- 4 smooth-rolling swivel castors
- Impact resistant polymer plastic design
- Built-in parts/tool storage compartments
Specifications
- Safe Working Capacity: 25kg
- Swivel Castors: 4 x 50(D)x16(W)mm
- Tray Depth: 43mm (inner)
- Length: 435mm
- Width: 400mm
- Height: 120mm (castor included)
(0 reviews) -
Blasting EquipmentTQB BRANDS Mobile Blasting Kit 37Litre
The TradeQuip “Made for the Trade” Mobile Abrasive Blasting Kit is perfect for a wide variety of surface preparation jobs such as removing paint, scale, rust and oxidation. Ideal for surface preparation on cars, trucks, machinery, steel, glass etching and much more. Features a 2.4m heavy-duty blast hose designed for long life and maneuverability. Durable wheels and built-in handle allow for easy transport. Simply add abrasive media and hook up to an air supply and you’re ready to blast. Some assembly required.
(Previous models include product code; 3060)
Note: TradeQuip Walnut Shells cannot be used in this mobile blasting unit.
PLEASE NOTE:
Minimum Free Delivery required to operate this unit (using Medium grit and the Small nozzle) is 400 Litres per minute.
Recommended Compressor Air Supply Delivery is 600 Litres per minute.
Features
- Heavy duty welded steel design
- High volume extra large valve
- Designed for high flow with minimal air input
- Blast gun fitted with safety trigger
- Heavy-wall blast hose
- Safety pressure-relief valve
- Durable wheels
- Safety hood, thread tape and abrasive refill funnel
- Onboard pressure regulator
- 4x ceramic nozzle tips 2.0 2.5 3.0 3.5mm
- Easy to fill screw tank cap
Replacement parts available
- 3008-1: Ceramic Tip Set to suit Old Style Ball Valve Type Handpiece 2.4 2.6 3.2 3.6mm
- 3008-2: Sand blasting gun
- 3008-3: Replacement Ceramic Tip Set 2.0 2.5 3.0 3.5mm
- 3008-4: Rubber Pad for 3008/2
- 3008-25: Replacement Hose
Specifications
- Capacity: 37 Litre
- Working Pressure: 60-125psi
- Air Delivery: 400-600 Litres per Minute @ 125psi (dependent on nozzle size)
- Abrasive Use: 27-90kg @ 125psi per hour (dependant on nozzle size)
- Hose Length: 2400mm
- Hose OD: 24mm
- Hose ID: 12mm
- Tank Dimensions: 508(H) x 305(Ø)
- Nett Weight: 19kg
- Carton: 770 x 420 x 370mm
- Weight: 21kg
Intended Use
Blasting work utilising compressed air with recommended abrasive media and/or glass beads to clean and abrade a surface, typically metal, of any rust, paint or other unwanted surface materials.
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Tear Down Bench
The TradeQuip “Made for the Trade” Mobile Tear-Down Bench combines the strength of heavy-duty enamelled steel with the convenient mobility of four 360° lockable swivel castors. Ideal for automatic transmission and engine parts repair, this unit has a top that angles slightly to a fluid drain feature. Fluids are safely contained in a removable plastic bin (8 Litre capacity) or the unit may be connected to a centralised drain system. With ergonomic adjustable leg height this work bench is easy setup for safe comfortable operation in any part of the workshop with heavy duty 100mm castors (2 rigid & 2 lockable swivel).
This workbench is great as a middle-of-the-workshop assembly table, extra worktop, or even a primary workbench for smaller workshops . When in the desired position, engage the swivel wheel castor brakes to avoid any unwanted movement. The rugged, all-purpose design goes where you need it to… and stays there to get the job done…
Fitted with adjustable work height, this workbench offers comfort and less back strain resulting in more productivity. The 14 gauge 1200 x 640mm table top has a 13mm rim that will contain all liquids. This work bench is fitted with a lockable drawer for security, alongside a removable (polyethylene) drain pan for convenience.
Versatile and undeniably strong, TradeQuip “Made for the Trade” workbenches are developed with sophisticated designs to endure demanding industry and heavy duty commercial applications.
Features
- Ideal for Engine and Transmission Rebuilds
- Heavy Duty Rolled Edge Steel Construction
- Convenient Removable Drain Bowl
- 13mm Bench top Rim to contain Leaking Fluids
- Quality Castors (2 swivel with brake)
- Key Lockable Steel Drawer with Ball Bearing Slides
- High Gloss Enamel Paint Finish
Specifications
- Load Capacity: 250kg
- Bench Top Capacity: 150kg
- Bench Top: 1200(L) x 640(W)mm (with 13mm rim)
- Shelf Capacity: 100kg
- Shelf: 1110(L) x 460(W)mm
- Drain Bowl Capacity: 8 Litres
- Castor Wheels: 100(D) x 25(W)mm
- Dimensions: 1200(L) x 640(W) x 875(H)mm
- Nett Weight: 56.5kg
- Carton: 1250(L) x 740(W) x 240(H)mm
- Gross Weight: 62kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Workbench
The TradeQuip “Made for the Trade” Mobile Workbench combines the strength of heavy-duty enamelled steel with the convenient mobility of two 360° lockable swivel castors. Designed for easy maneuverability on uneven surfaces, each castor locks fully in place to hold the workbench steady for projects requiring precision. It’s even stylish enough to roll up next to the BBQ for backyard get-togethers. Easy to move in any direction this workbench is great as a middle-of-the-workshop assembly table, extra worktop, or even a primary workbench for smaller workshops. When in the desired position, engage the two swivel wheel castor brakes to avoid any unwanted movement. The rugged, all-purpose design goes where you need it to… and stays there to get the job done…
Versatile and undeniably strong, TradeQuip workbenches are developed with sophisticated designs to endure demanding industry and heavy duty commercial applications.
Features
- Sturdy steel construction workbench
- Bottom shelf that allows unobstructed access
- High gloss enamel finish
- Quality castors – two fixed and two locking swivel
- Heavy-duty handle
Specifications
- Load Capacity: 300kg
- Bench Top Thickness: 3mm
- Work Surface: 1100 x 700mm
- Dimensions: 1100(L) x 700(W) x 830(H) mm
- Nett Weight: 60kg
- Carton: 1140 x 740 x 110mm
- Gross Weight: 63kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Workshop Table
The Heavy Duty steel construction makes this TradeQuip “Made for the Trade” Mobile Workshop Table durable enough for moving tools and car parts to and from the vehicle. Easily handles loads up to 45kg. Solid composite rubber castors ensure you can manoeuvre this mobile workshop table around the workshop without marring the floor. The height adjustment gives you plenty of options for lowered cars or SUV’s. This very versatile mobile work top makes any installation or service work flow more efficiently for auto repairers and installation workshops.
Features
- Strong tubular steel construction
- Handy tool storage holders
- Protective Bumper for top tray
- Smooth rolling composite rubber castors
- Height adjustable to most vehicles
- Sturdy main support post
Specifications
- Safe Working Capacity: 45kg
- Adjustable Working Height: 930-1270mm
- Castor Wheel Diameter: 75mm
- Table Top Dimensions: 809L x 475W x 42Hmm
- Main Tray Dimensions: 580L x 308W x 38Hmm
- Overall Dimensions: 870L x 755W x 930Hmm
- Nett Weight: 19.5kg
(0 reviews) -
Work Benches & StorageTQB BRANDS Mobile Workshop Table – 1 Drawer
Featuring a convenient drawer, the Heavy Duty steel construction makes this TradeQuip “Made for the Trade” Mobile Workshop Table durable enough for moving tools and car parts to and from the vehicle. Easily handles loads up to 80kg. Ball bearing castors ensure you can manoeuvre this mobile workshop table around the workshop. Including 3 compartments and 6 mounting holes, the height adjustment gives you plenty of options for lowered cars or SUV’s. This very versatile mobile work top makes any installation or service work flow more efficiently for auto repairers and installation workshops
Features
- Height adjustable to most vehicles
- Ball Bearing wheels for easy moveablilty
- Multi-functional top table with 3 compartments and 6 screwdriver holes
- Top EVA mat for skid resistance
- Extra drawer for more storage room
Specifications
- 340 x 300 x 45mm Drawer
- Adjustable from 860-1200mm
- Includes Drawer and Top Tray Liner
- 80kg Distributed Load Capacity
- 730 x 500 x 25mm
- Gross Weight: 20kg
(0 reviews) -
Parts WashersTQB BRANDS Parts Washer 180Litre
This top quality TradeQuip “Made for the Trade” Large Parts Washer is perfect for cleaning down most components prior to assembly. It is designed and manufactured to TradeQuip Quality Standards and has a very sturdy steel construction and quality enamelled finish. The “Quick Close” fire safe lid mechanism ensures operator protection in case of fire. The unit has a built in replacement cleaning fluid filter and easy maintenance 240V ‘High Volume’ cleaning fluid pump. Fitted with “Standards Australia Approved” 10Amp plug and cable.
Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
Features
- Sturdy metal construction
- Quality enamelled gloss finish
- Enclosed “High Volume” electric pump and fully screened pump housing
- Built-in replaceable pump inlet filter
- Chromed flexible metal fluid delivery pipe
- Large removable parts cleaning shelf for inspection and drying
- Immersion soaking when parts cleaning shelf removed
- Non welded one-piece tank
- Suitable for use with aqueous water based cleaning fluids
- Fire Safety Auto Drop Down Lid
- Replacement parts available
Specifications
- Pump Power: 240V/50Hz/0.5A
- Pump Output: 3.15 Litres per minute
- Tank Dimensions: 1135(L) x 545(W) x 320(H)mm
- Minimum Cleaning Fluid Capacity: 33Litres
- Maximum Cleaning Fluid Capacity: 90 Litres
- Overall Dimensions: 1150(L) x 560(W) x 1430(H)mm
- Nett Weight: 42kg
- Carton: 1140 x 550 x 330mm
- Gross Weight: 45kg
OEM Replacement Parts
Pump: Product Code#1005
Flexible Hose: Product Code #1003-1
Switch: Product Code #1003-4
Filter: Product Code #1003-5
Pump & Housing Assembly: Product Code #1003-6
“Fire Safe” Hinge Assembly: Product Code #1003-7
“Fire Safe” Fusible Link: Product Code #1003-FL
*Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
Intended Use
Best suited for low-volume items, this Parts Washer is typically ideal for cleaning smaller parts, where contaminants can be removed with a brush under low pressure.
(0 reviews) -
Parts WashersTQB BRANDS Parts Washer 90Litre
This top quality TradeQuip “Made for the Trade” Parts Washer is perfect for cleaning down most components prior to assembly. It is designed and manufactured to TradeQuip Quality Standards and has a very sturdy steel construction and quality enamelled finish. The “Quick Close” fire safe lid mechanism ensures operator protection in case of fire. The unit has a built in replacement cleaning fluid filter and easy maintenance 240V ‘High Volume’ cleaning fluid pump. Fitted with “Standards Australia Approved” 10Amp plug and cable.
Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
Features
- Sturdy metal construction
- Quality enamelled gloss finish
- Enclosed “High Volume” electric pump and fully screened pump housing
- Built-in replaceable pump inlet filter
- Chromed flexible metal fluid delivery pipe
- Large removable parts cleaning shelf for inspection and drying
- Immersion soaking when parts cleaning shelf removed
- Non welded one-piece tank
- Quick Close fire safe lid mechanism
- Suitable for use with aqueous water based cleaning fluids
- Replacement parts available
Specifications
- Tank Volume: 90Litres
- Pump Power: 240V/50Hz/0.5A
- Pump Output: 3.15 Litres per minute
- Tank Dimensions: 758(L) x 527(W) x 275(H)mm
- Minimum Cleaning Fluid Capacity: 18Litres
- Maximum Cleaning Fluid Capacity: 45 Litres
- Overall Dimensions: 780(L) x 540(W) x 908(H)mm
- Nett Weight: 23kg
- Carton: 790 x 550 x 320mm
- Gross Weight: 26kg
OEM Replacement Parts
Pump: Product Code#1005
Flexible Hose: Product Code #1003-1
Switch: Product Code #1003-4
Filter: Product Code #1003-5
Pump & Housing Assembly: Product Code #1003-6
Switch: Product Code #1003-4
“Fire Safe” Hinge Assembly: Product Code #1003-7
“Fire Safe” Fusible Link: Product Code #1003-FL
Intended Use
Best suited for low-volume items, this Parts Washer is typically ideal for cleaning smaller parts, where contaminants can be removed with a brush under low pressure.
*Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
(0 reviews) -
Parts WashersTQB BRANDS Parts Washer Brush & Hose
This top quality TradeQuip “Made for the Trade” parts washer brush is perfect for cleaning down most components prior to assembly. It is designed and manufactured to TradeQuip Quality Standards and has a very stiff and sturdy poly/plastic bristles. The TradeQuip Parts Washer Brush is a replacement brush for most TradeQuip Parts Washers. Features poly/plastic bristles designed to work with water based solvents to remove grease and grime.
Features
- Sturdy polymer construction
- Poly/plastic bristles work with solvent to remove grease and grime
- Suits parts washers with chromed flexible metal fluid delivery pipes
- Suitable for use with aqueous water based cleaning fluids
- Not suitable for solvent or petroleum based fluids
- Includes brush and hose
- Works with TradeQuip parts washers (Code/s 1003, 1004 and 1050, sold separately)
Specifications
- Polymer Brush and Handle Length: 260mm
- Rubber Hose Length: 670mm
- Hose Nipple ID: 15mm
- Bristle Length: 75mm
- Bristle Diameter: 35mm
- Weight: 300g
*Warning: For use with aqueous (water) based solutions only. Petroleum based cleaning fluids are harmful and will damage the pump and void the warranty.
(0 reviews) -
Parts WashersTQB BRANDS Parts Washer Concentrate 10Litre
Our TradeQuip “Made for the Trade” Parts Washer Concentrate is a water-based, safer alternative to solvent based degreasers. It is specifically formulated for cleaning and degreasing automotive, engineering and industrial parts in TradeQuip Parts Washers, Ultrasonic Cleaners and washable surfaces.
10Litres makes 50Litres
The TradeQuip Parts Washer Concentrate rapidly solubilises grease deposits and oily films in the presence of heavy grime loads. Free from petroleum, solvents, aromatic compounds, phenols, chlorinated solvents and biologically hard ingredients. When used as recommended, TradeQuip Parts Washer Concentrate will not affect rubber, plastics, glass, fully cured paintwork and most metals. It inhibits ferrous metal corrosion, exhibits excellent detergency and does not form stable emulsions, making it suitable for oil and solvent recovery equipment.
Direction for Use
Dilute the concentrate with cold or warm water. Apply solution with brush or dip the parts in the immersion wash tank for a few minutes. Brush and scrubbing may be required for difficult shapes and heavy soiled surfaces. Rinse with clean water and dry completely. Rust protection coating is required after washing process for ferrous metals before storage. Always wear PPE and safety glasses.
TradeQuip “Made for the Trade” Parts Washer Concentrate should be stored and transported securely in an upright position. Ensure the cap is fully closed. Store for up to 24 months from date of manufacture when stored in original, unopened packaging under dry conditions within the temperature range of +5°C to +30°C and out of direct sunlight. Protect from frost. Distributors should always rotate stock. When stored as stated, shelf life is 2 years from the production date label on the original TradeQuip container.
Features
- Dilution Rate: 1part concentrate to 5parts water
- Suitable for use in all TQB Brands Parts Washers & Ultrasonic Cleaners
- Adjust the concentration to achieve desired result
- Free from petroleum, solvents and biologically hard ingredients
- Will not affect rubber, plastic, glass, fully cured paintwork and most metals
- Avoid contact of strong solutions with unprotected polished aluminium, magnesium and alloys
- Always rinse off any work piece thoroughly after use
Specifications
- 10 Litres makes up to 50 Litres of parts washer solution
- Environmentally Friendly
- Non-toxic
- Non-caustic
- Non-flammable
- Bio-degradable
- Non-hazardous
First Aid Information:
If poisoning occurs, contact doctor or poisons information centre
If swallowed, do not induce vomiting give a glass of water
If in eyes, hold eyes open, flood eye with water for at least 15 minutes and see doctor(0 reviews) -
Parts WashersTQB BRANDS Parts Washer Concentrate 20Litre
Our TradeQuip “Made for the Trade” Parts Washer Concentrate is a water-based, safer alternative to solvent based degreasers. It is specifically formulated for cleaning and degreasing automotive, engineering and industrial parts in TradeQuip Parts Washers, Ultrasonic Cleaners and washable surfaces.
20Litres makes 100Litres
The TradeQuip Parts Washer Concentrate rapidly solubilises grease deposits and oily films in the presence of heavy grime loads. Free from petroleum, solvents, aromatic compounds, phenols, chlorinated solvents and biologically hard ingredients. When used as recommended, TradeQuip Parts Washer Concentrate will not affect rubber, plastics, glass, fully cured paintwork and most metals. It inhibits ferrous metal corrosion, exhibits excellent detergency and does not form stable emulsions, making it suitable for oil and solvent recovery equipment.
Direction for Use
Dilute the concentrate with cold or warm water. Apply solution with brush or dip the parts in the immersion wash tank for a few minutes. Brush and scrubbing may be required for difficult shapes and heavy soiled surfaces. Rinse with clean water and dry completely. Rust protection coating is required after washing process for ferrous metals before storage. Always wear PPE and safety glasses.
TradeQuip “Made for the Trade” Parts Washer Concentrate should be stored and transported securely in an upright position. Ensure the cap is fully closed. Store for up to 24 months from date of manufacture when stored in original, unopened packaging under dry conditions within the temperature range of +5°C to +30°C and out of direct sunlight. Protect from frost. Distributors should always rotate stock. When stored as stated, shelf life is 2 years from the production date label on the original TradeQuip container.
Features
- Dilution Rate: 1part concentrate to 5parts water
- Suitable for use in all TQB Brands Parts Washers & Ultrasonic Cleaners
- Adjust the concentration to achieve desired result
- Free from petroleum, solvents and biologically hard ingredients
- Will not affect rubber, plastic, glass, fully cured paintwork and most metals
- Avoid contact of strong solutions with unprotected polished aluminium, magnesium and alloys
- Always rinse off any work piece thoroughly after use
Specifications
- 20 Litres makes up to 100 Litres of parts washer solution
- Environmentally Friendly
- Non-toxic
- Non-caustic
- Non-flammable
- Bio-degradable
- Non-hazardous
First Aid Information:
If poisoning occurs, contact doctor or poisons information centre
If swallowed, do not induce vomiting give a glass of water
If in eyes, hold eyes open, flood eye with water for at least 15 minutes and see doctor(0 reviews) -
Parts WashersTQB BRANDS Parts Washer Pump
This top quality TradeQuip “Made for the Trade” submersible Parts Washer Pump is a direct replacement for the pumps fitted to 15Litre 90Litre & 180Litre TradeQuip Parts Washers.
Suitable for use with water based parts cleaning fluids TradeQuip 5082-3-4-5T.
Flexible pipe also available.
Features
- Sturdy poly/plastic body
- Stainless steel shaft
- Suits parts washers with chromed flexible metal fluid delivery pipes
- Snap off inlet grill for easy cleaning
- Suitable for use with aqueous water based cleaning fluids
- Works with TradeQuip parts washers (Code/s 1003T, 1004T and 1050, sold separately)
Specifications
- Power: 230V 50Hz 26W 0.6Amp
- Cable Length: 305mm
- HeadMax: 1.8m
- Flowrate: 3.15 Litres per minute
- Outlet Thread: 1/2″ NPT Female
- Dimensions: 100(L) x 85(H) x 65(W) mm
- Weight: 1kg
(0 reviews) -
Porta Powers & Panel RepairTQB BRANDS Porta Power Kit 10,000kg
The TradeQuip “Made for the Trade” 10,000kg Hydraulic Porta Power Kit is designed to be used for pushing, spreading, and pressing of vehicle body panels as well as various component parts and assemblies. The variety of attachments include a rubber head, flat base, wedge spreader, spreader toe and various extension tubes with a snap lock design for quick and easy assembly. The pump has an automatic overload system to help prevent damage to the pump ram and associated equipment. The flex head features a permanently moulded rubber pad, interlocked to prevent separation. The complete kit includes a variety of specially designed auto body, frame repair and construction components for lifting, pushing, bending and spreading. (Previous models include product code/s; 2005T, PP10T, PROPP10, RLBRK10)
Features
- Spring loaded ram return system, allowing controlled retraction of the ram
- Pump may be used in horizontal and vertical position
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Pump has an automatic overload system to help prevent damage to rams and equipment
- Easily adapts to hoses, rams, pumps, spreaders, and other accessories using common 1/4″ fittings
- Contained in sturdy Plastic Carry Case
Ram Attachments
- Extensions (5 different lengths) connect in different combinations to reach overall desired job distance.
- Male Connector connects the female end of the Ram to a Base.
- Flat Base is used on the stationary side to spread the force of the Ram for extra safety.
- 90° V Base offsets the Ram force when there is limited opportunity of a straight line between the stationary side and the damaged side, or to spread out force on curved surfaces.
- Serrated Saddle is fitted on the pushing end to prevent slipping.
- Rubber Head is used for popping dents out of sheet metal such as doors or body panels and to minimise damage to work surfaces.
- Wedge Head is for repair small dents and areas located in angles and tight spaces.
- Ram Toe and Plunger Toe are used together to allow spreading in areas that the Ram cannot fit into.
Note: The Ram Toe and Plunger Toe MUST be used together to prevent an off-centre load.
Specifications
- Working Capacity: 10,000kg
- Kit Contents: 14 Pieces containing Pump, Hose and Fittings
- Ram Length retracted: 322mm
- Ram Length fully extended: 452mm
- Extensions: 110, 265, 365, 520mm
- Adaptor Diameter: 33mm
- Hydraulic Hose Length: 1500mm
- Hydraulic Oil Capacity: 650ml
- Overall Carry Case Dimensions: 905(L) x 385(W) x 175(H) mm
- Nett Weight: 31kg
- Carton: 925 x 395 x 185mm
- Gross Weight: 32kg
Intended Use
For regular professional collision repair and medium duty applications where the convenience of hydraulic power can be utilised for spreading, clamping, pushing and lifting.
(0 reviews) -
Porta Powers & Panel RepairTQB BRANDS Porta Power Kit 20,000kg
Our 20,000kg “Borum Industrial” Porta-Power set provides extra capacity for the toughest assignments. Two-speed pump extends ram quickly saving time and money. Versatile attachments provide broad range of function. Automatic two speed pump speeds ram to load, then shifts power stroke. With this set, spread materials apart and pull heavy duty machinery and sections. Pull, bend, lift, push, straighten and spread metals with this industrial quality hydraulic kit! Kit contains a heavy-duty pump and multiple extensions and accessories to repair body panel dents, level machinery and more. The 10,000 PSI pump in this portable hydraulic kit exerts tremendous force for fixing, forcing and shaping metal.This is a heavy duty set makes all bull-work repairs easier.
This equipment is used by the industry professionals for pressing, spreading, lifting, straightening and clamping panel and paint workshops and collision repair centres. Components are manufactured to industry standards, eg. precision threaded for durability and extension tubes that feature a strong wall design for increased resistance to bending and deformation. All kits are supplied with industry standard high flow hydraulic couplings and dust caps. (Previous models include product code/s; 2062, 20TPP)
Powerful, Heavy-Duty Operation
This 20,000kg heavy-duty hydraulic body repair kit is the perfect choice for a wide variety of uses. The quality components and fittings make this unit perfect for those looking for quality and precision all day everyday!
Added Safety Overload Protection
Carelessness can cause injuries, but this unit gives you extra peace of mind. It’s fitted with a safety overload valve for extra protection. Even if you load the ram unit up with too much force, the safety overload kicks in to protect the internals.
Use It Day In And Day Out
This professional kit is designed for durability. A rugged high-grade steel construction is teamed with a lead-free paint finish that covers the entire surface to ensure long-lasting wear and help prevent rust. The paint is oil-, grease- and dirt-resistant for easy cleanup no matter how often you put this portable power kit to work.
Features
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility.
- Heavy walled extension tubes stand up in tough applications
- 2x metal storage cases
Accessories
- 700mm extension tube
- 510mm extension tube
- 255mm extension tube
- 125mm extension tube
- 3 each, 70mm connective tube & 60mm joint connector tube
- Base
- Ram toe
- Plunger toe
- Wedge toe
- V-base
- Wrench
Specifications
- Safe Working Capacity: 20,000kg
- Retracted Ram Length: 285mm
- Ram Stroke: 125mm
- Hydraulic Hose Length: 1470mm
- Weight: 62kg
- Carton 1 of 2: 810 x 300 x 185mm
- Carton 2 of 2: 820 x 405 x 115mm
Intended Use
For industrial medium-heavy duty applications where the convenience of hydraulic power can be utilised for spreading, clamping, pushing and lifting.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Portable Industrial Spot Cooling Air Conditioner – 2.7KW
TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanised steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to wherever and at whatever point you require it.
With its compact size, this TradeQuip “Made for the Trade” Portable Industrial Air Conditioning unit is perfectly suited to spot cool work areas, yet still delivers an impressive amount of cooling air output.
The 1031T is the smallest unit in size and capacity in the TradeQuip “Made for the Trade” series portable air conditioners. The 1031T has an extremely small foot print that is ideal for spot cooling people or equipment in a high ambient environment, like in a workshop or office space. The TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation. These portable air conditioners achieve up to 10°C temperature differential across its coil. This means that 39°C input air will instantly produce 29°C. output air for spot cooling a work station the unit will effectively cool a person and/or workshop equipment within 2-5m of the unit instantly.
The 1031T runs on a standard 240V/10A circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy set up.
With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- Compact yet powerful
- Runs on 240V 10A circuit
- Wide operating range of 18º- 45ºC
- Single duct system for easy installation
- 5 Litre self-contained condensation tank for easy removal and emptying
- Capillary tube construction for simplicity
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- Durable and long lasting steel construction
- Heavy duty locking castors and handles for easy manoeuvrability
Specifications
- Cooling Capacity: 2.7KW / 9200Btu
- Power Unit: 240V 50Hz 10amp plug
- Rated Power: 950W
- Rated Current: 4.2A
- Max. Air Flow: 400m3 per hour
- Coverage Area: 12-15m2
- Noise Level: 55dB(A)
- Operating Temperature: 18° – 45°C
- Suction Pressure: 2.5Mpa (Max.)
- Discharge Pressure: 4.5Mpa (Max.)
- Speed Control: 2-speed
- Cooling Pipe: 120mm Dia
- Exhaust Pipe: 160mm Dia
- Condensation Tank Capacity: 5 Litres
- Castor Wheels: 75mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 855(H) x 430(W) x 405(D)
- Nett Weight: 42kg
- Carton: 965 x 515 x 484mm
- Gross Weight 47kg
Intended use:
This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose (such as drying clothes, cooling food, etc.)
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Portable Industrial Spot Cooling Air Conditioner 4.5kW
TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanised steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to wherever and at whatever point you require it.
With its compact size, this TradeQuip “Made for the Trade” Portable Industrial Air Conditioning unit is perfectly suited to spot cool work areas, yet still delivers an impressive amount of cooling air output.
The 1032T is the medium unit in size and capacity in the TradeQuip “Made for the Trade” series of portable air conditioners. The 1032T has a small foot print that is ideal for spot cooling people or equipment in a high ambient environment, like in a workshop or office space. The TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation. These portable air conditioners achieve up to 10°C temperature differential across its coil. This means that 39°C input air will instantly produce 29°C output air for spot cooling at a work station which will effectively cool a person and/or workshop equipment within 2-5m of the unit instantly.
The 1032T runs on a 240V/15A circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy set up.
With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- Compact yet powerful
- Runs on 240V 15A circuit
- Wide operating range of 18º- 45ºC
- Single duct system for easy installation
- 5 Litre self-contained condensation tank for easy removal and emptying
- Capillary tube construction for simplicity
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- Durable and long lasting steel construction
- Heavy duty locking castors and handles for easy manoeuvrability
Specifications
- Cooling Capacity: 4.5KW / 15300Btu
- Power Unit: 240V 50Hz 15amp plug
- Rated Power: 2000W
- Rated Current: 9.0A
- Max. Air Flow: 800m3 per hour
- Coverage Area: 35-40m2
- Noise Level: 60dB(A)
- Operating Temperature: 18° – 45°C
- Suction Pressure: 2.5Mpa (Max.)
- Discharge Pressure: 4.5Mpa (Max.)
- Speed Control: 2-speed
- Cooling Pipe: 120mm Dia
- Exhaust Pipe: 200mm Dia
- Condensation Tank Capacity: 8 Litres
- Castor Wheels: 75mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1035(H) x 520(W) x 480(D)
- Nett Weight: 70kg
- Carton 1of2: 1110 x 610 x 570mm
- Carton 2of2: 370 x 350 x 260mm
- Gross Weight 78kg
Intended use:
This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose (such as drying clothes, cooling food, etc.)
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Portable Industrial Spot Cooling Air Conditioner 6.5kW
TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanised steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to wherever and at whatever point you require it.
With its compact size, this TradeQuip “Made for the Trade” Portable Industrial Air Conditioning unit is perfectly suited to spot cool work areas, yet still delivers an impressive amount of cooling air output.
The 1033T is the large unit in size and capacity in the TradeQuip “Made for the Trade” series portable air conditioners. The 1033T has a foot print that is ideal for spot cooling people or equipment in a high ambient environment, like in a workshop or office space. The TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation. These portable air conditioners achieve up to 10°C temperature differential across its coil. This means that 39°C input air will instantly produce 29°C output air for spot cooling at a work station which will effectively cool a person and/or workshop equipment within 2-5m of the unit instantly.
The 1033T runs on a 240V/15A circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy set up.
With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- Compact yet powerful
- Runs on 240V 15A circuit
- Wide operating range of 18º- 45ºC
- Single duct system for easy installation
- 5 Litre self-contained condensation tank for easy removal and emptying
- Capillary tube construction for simplicity
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- Durable and long lasting steel construction
- Heavy duty locking castors and handles for easy manoeuvrability
Specifications
- Cooling Capacity: 6.5KW / 22200Btu
- Power Unit: 240V 50Hz 15amp plug
- Rated Power: 3000W
- Rated Current: 13.5A
- Max. Air Flow: 1200m3 per hour
- Coverage Area: 55-60m2
- Noise Level:65dB(A)
- Operating Temperature: 18° – 45°C
- Suction Pressure: 2.5Mpa (Max.)
- Discharge Pressure: 4.5Mpa (Max.)
- Speed Control: 2-speed
- Cooling Pipe: 120mm Dia
- Exhaust Pipe: 250mm Dia
- Condensation Tank Capacity: 13 Litres
- Castor Wheels: 75mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1245(H) x 640(W) x 560(D)
- Nett Weight: 100kg
- Carton 1of2: 1730 x 740 x 610mm
- Gross Weight 155kg
Intended use:
This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose (such as drying clothes, cooling food, etc.)
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Blasting EquipmentTQB BRANDS Replacement Blasting Gun
The TradeQuip “Made for the Trade” Replacement Abrasive Blasting Gun is perfect for a wide variety of surface preparation jobs such as removing paint, scale, rust and oxidation. Ideal for surface preparation on cars, trucks, machinery, steel, glass etching and much more. This abrasive blasting deadman valve removes the need for hose adaptors by blocking and sealing the grit flow immediately when the handle is released! The deadman valve features a comfortable nonslip vinyl grip, a spring loaded paddle trigger for added convenience and a fast on/off switch to conserve media. For use with all TradeQuip and Borum Mobile Blasters (Including Soda Blasters). Use to replace defective or damaged deadman valve or to convert to the convenience of one-hand operation lever flow control.
Features:
- One-Hand Lever Flow Control
- Fast on/off conserves media and reduces mess
- Spring loaded paddle trigger
- Nonslip vinyl grip
- Carbon steel body
- Designed for high flow with minimal air input
Specifications:
- Length: 200mm
- Weight: 1kg
NOTE: We recommend the use of personal protective equipment. Always wear a respiratory filter or mask over your mouth when operating this unit. You will create a cloud of abrasive media material and debris which should not be inhaled
Choosing the right abrasive media
Garnet
Garnet is one of the last few abrasives that are naturally mined. It is an industrial gemstone that creates a profile virtually free of embedment, which makes it excellent for coating adhesion, as well as applications where low or no transfer of grit into the substrate can be tolerated. Garnet is generally used when paint, rust, and scale have to be removed from steel, such as car/truck frames, tanks, heavy machinery, farm equipment, etc. Garnet is one of the most economical abrasive and is the best choice for large blast projects. Best uses: rust removal, heavy scale removal, paint and coatings removal on heavy-gauge steel.
Glass Beads
Crushed Glass or Glass Beads would have to be one of the most popular forms of blast media and can be used on a variety of dustless blasting and abrasive blasting projects across all industry sectors. Using crushed glass means you know you are using a eco friendly and recycled product that helps the environment. If you’re looking to achieve a smooth, bright finish, glass beads can be your best option. Glass beads are also recyclable and can be used up to 100 times before replacement, making them an extremely cost-effective option. Glass bead media works well on soft metals like aluminium and brass as well as plastic. Works with a blasting gun or in a blast cabinet.
Walnut Shell
Nut shells and other organic materials, don’t cause anchor patterns, making them useful for removing dirt, grease, oil, carbon, scale, burrs and paint without changing the underlying substrate. Walnut shells can be an excellent choice for softer surfaces such as wood — they won’t cause etching. Walnut shells are one of less abrasive blasting media you can use and are completely biodegradable, making them among the most environmentally-friendly blasting media. Walnut shell blasting media is great for rust- free paint removal from sheet metal and for cleaning engines and transmissions. Walnut media blasting is especially effective when you want to clean paint, grease and other dirt from the surface of a material but maintain the integrity of the substrate materials. Ideal for use with aluminium, brass and sheet metal.
Steel Grit
Steel grit offers a more angular shape and sharper texture. It can be used to remove rust, paint or scale from steel surfaces. Steel Grit works well in many tough applications such as railway maintenance, structural steel and in foundries. Steel Grit Abrasive Media is made up of sharp cutting angular particles that clean by cutting and etching into the surface which usually results in an etched surface with well defined anchor pattern. Steel Grit can also be used in blasting cabinets for surface preparation as its sharp edge will gradually round over as the abrasive is recycled. The durability and resistance to impact fatigue of Steel Grit provides maximum cleaning efficiency at the most economical cost.
(0 reviews)