Hand Tools
Showing 109–144 of 1187 results
-
ScrewdriversBORDO Screwdriver Bit Adaptors Female-to-Female Quick Change Adaptors
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver Bit Adaptors IMPACT Male-to-Male
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver Bit Adaptors Male-to-Male
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver Bit Adaptors Sets
- Socket Adaptor Set – 1/4, 3/8, 1/2 X 50mm (set of 3)
- All Bordo adaptors are manufactured from premium heat treated alloy steel.
- The universal 1/4″ hex shank is suitable for use in most power tools and quick change adaptors/extensions.
(0 reviews) -
ScrewdriversBORDO Screwdriver IMPACT Insert Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver IMPACT Power Bits Double Ended
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver IMPACT Power Bits Set
- 6 Pce Impact Power Bit Set
- Designed and manufactured for optimum performance in modern impact drivers.
- Uniquely engineered torsion zone with multi-stage hardening and tempering to dissipate damaging peak loads.
(0 reviews) -
ScrewdriversBORDO Screwdriver IMPACT Power Bits Single Ended
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver Security Power Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver Standard Insert Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver Standard Insert Security Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver Standard Power Bits Double Ended
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwdriver Standard Power Bits Single Ended
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Screwgun Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Standard Nutsetter
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Standard Nutsetter Flat
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Screwdrivers
BORDO Standard Nutsetter Impact Absorbing
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Standard Nutsetter Set
- Nutsetter Set 5/16, 3/8 x 65mm
- Standard Nutsetters feature a small internal chamfer to facilitate quick screw engagement.
- The chamfer also reduces marking of the head-shoulder junction when using painted hex head screws.
- All Bordo Nutsetters are manufactured from premium heat treated alloy steel and feature powerful magnets.
- The universal 1/4″ hex shank is suitable for use in most power tools and quick change adaptors/extensions.
(0 reviews) -
Depth Gauges & IndicatorsBORDO Thread Pitch Gauges
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Dispensing, Caulking & Sausage GunsCHEMTOOLS 1:1 & 2:1 Dual Component 400ml Cartridge Dispensing Gun
Industrial Grade. Portable and lightweight, yet robust. Solid plastic casing with steel piston arms.
Ideal applicator where air supply is not available. Easy to load, slide in & slide out cartridge insertion system.
For medium to high viscosity cartridges.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS 10:1 Dual Component 490ml Cartridge Dispensing Gun
Industrial Grade. Portable and lightweight, yet robust. Solid plastic casing with steel piston arms.
Ideal applicator where air supply is not available. Easy to load, slide in & slide out cartridge insertion system.
For medium to high viscosity cartridges.
Compatible with Rapidstick™ 8-420 Structural Adhesive (All Substrates)
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS 10cc Single Component Dispensing Gun
Ergonomic, robust, lightweight and portable design. Replaces traditional methods of dispensing, such as manual syringes and squeeze bottles. Ideal for potting, lines, or dots.
7:1 ratio leverage. Spring reverse function prevents dripping. Allows easy, accurate, metered shots of medium to thick viscosity materials such as pastes, sealants, silicones, gels, epoxies, compounds, fluxes, greases, and RTV silicones.
Fits disposable barrels and pistons. Compatible with most industrial syringes.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS 30cc & 55cc Single Component Dispensing Gun
Ergonomic, robust, lightweight and portable design. Replaces traditional methods of dispensing, such as manual syringes and squeeze bottles. Ideal for potting, lines, or dots.
7:1 ratio leverage. Spring reverse function prevents dripping. Allows easy, accurate, metered shots of medium to thick viscosity materials such as pastes, sealants, silicones, gels, epoxies, compounds, fluxes, greases, and RTV silicones.
Fits disposable barrels and pistons. Compatible with most industrial syringes.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Bayonet Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml Dual Cartridges)
The Bayonet Helical Static Mixing Nozzle contains 16 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-25 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Bayonet Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml & 50ml Dual Cartridges)
The Bayonet Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-50 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Bell Head Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 290ml & 400ml Dual Cartridges)
The Bell Head Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-400 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Drum Dispensers, Pumps & TapsCHEMTOOLS DPU-1 Drum Tap
DPU-1 Drum Tap fits most Plastic Cube drums sized between 15 and 25 Litres. It installs easily and produces a fast, smooth flow, best suiting drums which are required to dispense smaller quantities of liquids quickly.
The tap handle provides the security of a fast, no leak, shut-off valve, and is designed to ensure better grip for a more controlled motion whilst using the tap. Its polyethylene body is extremely hard-wearing and long-lasting with broad chemical compatibility.
(0 reviews) -
Drum Dispensers, Pumps & TapsCHEMTOOLS DPU-20 Spring-Loaded Pump Dispenser – 58mm
DPU-20 Spring-Loaded Pump Dispenser is a heavy-duty push pump designed to handle viscous liquids such as creams, soaps, lotions, and gels. It suits most plastic drum cubes between 15 and 25 Litres with a 58mm diameter cap screw. The internal 37cm dip tube may be cut to size for containers of any height greater than 15cm.
DPU-20 Pump Dispenser is durable and sturdy for use in commercial or industrial environments. Each stroke dispenses a 30ml dose, and when fully depressed, it can be twist-locked in situ for safe transport or space-saving storage. A simple twist in the opposite direction releases the lock, and the stainless steel spring-loaded pump auto-extends to full height once more.
(0 reviews) -
Drum Dispensers, Pumps & TapsCHEMTOOLS DPU-5 Spring-Loaded Pump Dispenser – 38mm
DPU-5 Spring-Loaded Pump Dispenser is a heavy-duty push pump designed to handle viscous liquids such as creams, soaps, lotions, and gels. It suits most plastic ‘jerry can’ bottles up to 5 Litres with a 38mm diameter cap screw. The internal 23cm dip tube may be cut to size for containers of any height greater than 15cm.
DPU-5 Pump Dispenser is durable and sturdy for use in commercial or industrial environments. Each stroke dispenses a 30ml dose, and when fully depressed, it can be twist-locked in situ for safe transport or space-saving storage. A simple twist in the opposite direction releases the lock, and the stainless steel spring-loaded pump auto-extends to full height once more.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS F System Static Mixing Nozzle
(10:1 Ratio, Suitable for 4900ml Dual Cartridges)
The F System Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channeling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-490 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Heavy Duty Industrial Grade On/Off Dripless Caulking Gun
The durable DCT-DG8310-1 Industrial Grade Dripless Caulking Gun is manufactured from heavy duty metal with a premium finish and an ergonomically designed aluminium handle and trigger. It features a high density sintered thrust block with a heat-treated (hardened) push rod and dual thrust ratios (dripless ON: 14:1 / dripless OFF: 19:1) for smooth, precise dispensing of high viscosity materials.
The DCT-DG8310-1 includes an easy to reach dripless on/off switch which pulls back the push rod, ensuring caulk does not continue to flow, while its 360-degree rotating cradle makes it easy to install and remove cartridges.
Weight: 780g
Dimensions: 360mm x 210mm x 60mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Pneumatic Sausage Gun
This Pneumatic Sausage Gun comes with a built-in, fully adjustable pressure regulator for constant force and speed. It is perfectly balanced by an ergonomic handle, and manufactured with a tough aluminium body and ring nuts, providing high resistance over time. Its quick release trigger ensures extrusion is immediately stopped, preventing wastage and application outside the desired area.
This pneumatic gun is designed to deliver a smooth, uninterrupted flow, effortless dispensing, and hassle-free application of multiple adhesives and sealant types.
Sound Level: < 70 DB
Max Operating Pressure: Approx. 90 – 120 psi
Minimum Hose Size: 10mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Professional Grade Caulking Gun
The DCT-DG8310-2 Professional Grade Caulking Gun with a 8:1 thrust ratio features a premium powder-coated metal body and a full-sized aluminium handle with ergonomic grip. Its half cradle makes it easy to install and remove cartridges, and its light weight is perfect for applications of standard viscosity materials such as acrylics, MS polymers, silicones, and polyurethane sealants.
Weight: 385g
Dimensions: 360mm x 210mm x 60mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Professional Grade Sausage & Bulk Caulking Gun
The DCT-DG8600-2 Professional Grade Sausage & Bulk Caulking Gun with 12:1 thrust ratio is perfect for the application of standard materials such as acrylic, silicone, and polyurethane. It is manufactured with a strong and highly durable aluminium barrel, with an easy release, corrosion resistant spring-loaded trigger handle and aluminium cap.
This caulking gun is engineered for smooth and precise material delivery and will satisfy even the most demanding professional with its light-weight body, great results, and easy disassembly for cleaning.
Weight: 585g
Dimensions: 555mm x 520mm x 340mmCompatible with Rapidstick™ PITBULL 201 Dura-Flex Hybrid Sealant, 600g Sausage
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Ratchet Propelled Twin Piston Cartridge Mixing Gun
(Suitable for 50ml Dual Cartridges, 10:1 Ratio)
The DCT-DG8050-110 Ratchet Propelled Twin Piston Cartridge Mixing Gun is specially designed for 50ml 10:1 dual component dispensing cartridges of MMA, Acrylic Cement, Epoxy, or PU. Its heavy duty housing is constructed from high impact light-weight plastic for durability and easy portability, and its twin pistons are designed to provide an even and reliable flow for consistent and precise dispensing.
As a manual, no-mess, easy clean-up solution to 2 component dispensing, the DCT-DG8050-110 demonstrates reduced extrusion resistance and is well suited for many assembly operations in a wide sector of markets, including aerospace, electronics, construction, and automotive.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Ratchet Propelled Twin Piston Cartridge Mixing Gun
(Suitable for 50ml Dual Cartridges, 1:1 & 2:1 Ratio)
The DCT-DG8050-11 Ratchet Propelled Twin Piston Cartridge Mixing Gun is specially designed for 50ml 1:1 and 2:1 dual component dispensing cartridges of MMA, Acrylic Cement, Epoxy, or PU. Its heavy duty housing is constructed from high impact light-weight plastic for durability and easy portability, and its twin pistons are designed to provide an even and reliable flow for consistent and precise dispensing.
As a manual, no-mess, easy clean-up solution to 2 component dispensing, the DCT-DG8050-11 demonstrates reduced extrusion resistance and is well suited for many assembly operations in a wide sector of markets, including aerospace, electronics, construction, and automotive.
(0 reviews)
