Hand Tools
Showing 505–540 of 4343 results
-
Mixing Nozzles & Dispensing TipsCHEMTOOLS Bayonet Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml Dual Cartridges)
The Bayonet Helical Static Mixing Nozzle contains 16 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-25 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Bayonet Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml & 50ml Dual Cartridges)
The Bayonet Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-50 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Bell Head Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 290ml & 400ml Dual Cartridges)
The Bell Head Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-400 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Drum Dispensers, Pumps & TapsCHEMTOOLS DPU-1 Drum Tap
DPU-1 Drum Tap fits most Plastic Cube drums sized between 15 and 25 Litres. It installs easily and produces a fast, smooth flow, best suiting drums which are required to dispense smaller quantities of liquids quickly.
The tap handle provides the security of a fast, no leak, shut-off valve, and is designed to ensure better grip for a more controlled motion whilst using the tap. Its polyethylene body is extremely hard-wearing and long-lasting with broad chemical compatibility.
(0 reviews) -
Drum Dispensers, Pumps & TapsCHEMTOOLS DPU-20 Spring-Loaded Pump Dispenser – 58mm
DPU-20 Spring-Loaded Pump Dispenser is a heavy-duty push pump designed to handle viscous liquids such as creams, soaps, lotions, and gels. It suits most plastic drum cubes between 15 and 25 Litres with a 58mm diameter cap screw. The internal 37cm dip tube may be cut to size for containers of any height greater than 15cm.
DPU-20 Pump Dispenser is durable and sturdy for use in commercial or industrial environments. Each stroke dispenses a 30ml dose, and when fully depressed, it can be twist-locked in situ for safe transport or space-saving storage. A simple twist in the opposite direction releases the lock, and the stainless steel spring-loaded pump auto-extends to full height once more.
(0 reviews) -
Drum Dispensers, Pumps & TapsCHEMTOOLS DPU-5 Spring-Loaded Pump Dispenser – 38mm
DPU-5 Spring-Loaded Pump Dispenser is a heavy-duty push pump designed to handle viscous liquids such as creams, soaps, lotions, and gels. It suits most plastic ‘jerry can’ bottles up to 5 Litres with a 38mm diameter cap screw. The internal 23cm dip tube may be cut to size for containers of any height greater than 15cm.
DPU-5 Pump Dispenser is durable and sturdy for use in commercial or industrial environments. Each stroke dispenses a 30ml dose, and when fully depressed, it can be twist-locked in situ for safe transport or space-saving storage. A simple twist in the opposite direction releases the lock, and the stainless steel spring-loaded pump auto-extends to full height once more.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS F System Static Mixing Nozzle
(10:1 Ratio, Suitable for 4900ml Dual Cartridges)
The F System Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channeling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-490 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Heavy Duty Industrial Grade On/Off Dripless Caulking Gun
The durable DCT-DG8310-1 Industrial Grade Dripless Caulking Gun is manufactured from heavy duty metal with a premium finish and an ergonomically designed aluminium handle and trigger. It features a high density sintered thrust block with a heat-treated (hardened) push rod and dual thrust ratios (dripless ON: 14:1 / dripless OFF: 19:1) for smooth, precise dispensing of high viscosity materials.
The DCT-DG8310-1 includes an easy to reach dripless on/off switch which pulls back the push rod, ensuring caulk does not continue to flow, while its 360-degree rotating cradle makes it easy to install and remove cartridges.
Weight: 780g
Dimensions: 360mm x 210mm x 60mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Pneumatic Sausage Gun
This Pneumatic Sausage Gun comes with a built-in, fully adjustable pressure regulator for constant force and speed. It is perfectly balanced by an ergonomic handle, and manufactured with a tough aluminium body and ring nuts, providing high resistance over time. Its quick release trigger ensures extrusion is immediately stopped, preventing wastage and application outside the desired area.
This pneumatic gun is designed to deliver a smooth, uninterrupted flow, effortless dispensing, and hassle-free application of multiple adhesives and sealant types.
Sound Level: < 70 DB
Max Operating Pressure: Approx. 90 – 120 psi
Minimum Hose Size: 10mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Professional Grade Caulking Gun
The DCT-DG8310-2 Professional Grade Caulking Gun with a 8:1 thrust ratio features a premium powder-coated metal body and a full-sized aluminium handle with ergonomic grip. Its half cradle makes it easy to install and remove cartridges, and its light weight is perfect for applications of standard viscosity materials such as acrylics, MS polymers, silicones, and polyurethane sealants.
Weight: 385g
Dimensions: 360mm x 210mm x 60mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Professional Grade Sausage & Bulk Caulking Gun
The DCT-DG8600-2 Professional Grade Sausage & Bulk Caulking Gun with 12:1 thrust ratio is perfect for the application of standard materials such as acrylic, silicone, and polyurethane. It is manufactured with a strong and highly durable aluminium barrel, with an easy release, corrosion resistant spring-loaded trigger handle and aluminium cap.
This caulking gun is engineered for smooth and precise material delivery and will satisfy even the most demanding professional with its light-weight body, great results, and easy disassembly for cleaning.
Weight: 585g
Dimensions: 555mm x 520mm x 340mmCompatible with Rapidstick™ PITBULL 201 Dura-Flex Hybrid Sealant, 600g Sausage
(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Disposable Acid Brush
Rolled tin handle. Horse hair bristles. Handy and economical. Great for once-only use with glues, solvents, acids, fluxes, greases, and other coatings. Ideal for touch-ups, dusting, and most odd workshop jobs. Available in packs of 12 or boxes of 144. Not available separately.
• Handle Length: 135mm
• Full Length: 154mm
• Brush Size: 19mm (L) x 12mm x 8mmRefer to diagram (left) for further measure
(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Double-Ended Chisel Applicator Brush
Stainless Steel handle. Horse hair bristles. Chiseled on a 30 degree angle at one end for heavy duty scrubbing and better reach into tight corners. Straight bristles at the opposite end for application of liquids.
• Handle Length: 115mm
• Full Length: 136mm
• Brush Size, Chiseled End: 7mm (L) x 5mm x 4mm
• Brush Size, Straight End: 14mm (L) x 5mm x 4mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Double-Ended Chisel Scrubbing Brush
Zinc plated steel handle. Horse hair bristles. Chiseled on a 30 degree angle at one end for better reach into tight corners. Designed for heavy duty scrubbing at either end.
• Handle Length: 114mm
• Full Length: 130mm
• Brush Size, Chiseled End: 8mm (L) x 13mm x 7mm
• Brush Size, Straight End: 8mm (L) x 13mm x 9mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Fibreglass Adhesive Remover Pen
Handy and versatile. Effortlessly removes dried-up adhesive.
Made from fine fibreglass threads. Customise the thread length for each application by twisting the end of the pen to increase/decrease thread exposure.
Perfect for cleaning, polishing, and burnishing applications.
Great for rust removal, contact cleaning, cleaning of pads, de-burring metal parts, and much more.
• Housing Size: 120mm long, 12mm diameter
• Thread Bundle: 4mm diameter
• Thread Length: Adjustable(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Fine Applicator Brush
Stainless steel handle. Goat hair bristles. Designed for all purpose use but suits fine cleaning and fluid application of adhesives, solvents, acids, and other liquid coatings.
• Handle Length: 89mm
• Full Length: 93mm
• Brush Size: 4mm (L) x 5mm x 2mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ General Utility Brush
Multiple rows of hog hair. Extra large brush base. Great for sweeping polished surfaces. Excellent clean-up brush for wet or dry surfaces.
• Full Length: 210mm
• Brush Size: 20mm (L) x 54mm x 21mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Reusable Acid Brush
Zinc plated steel handle. Horse hair bristles. Chiseled on a 30 degree angle at one end for better reach into tight corners. Designed for heavy duty scrubbing at either end.
• Handle Length: 114mm
• Full Length: 134mm
• Brush Size: 20mm (L) x 15mm x 13mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Scratch Brush
3 rows of stiff hog hair bristles. Great for the removal of sticky glues or crusty materials. Use wet or dry.
• Full Length: 195mm
• Brush Size: 12mm (L) x 36mm x 8mm(0 reviews) -
Brushware
CHEMTOOLS Rapidstick™ Soft Brass Brush
Heavy duty triple row cleaning brush. Secured high grade brass steel bristles. Removes chemical build-up and flux deposits. Ideal for cleaning hot soldering tips without damage.
• Full Length: 195mm
• Brush Size: 12mm (L) x 26mm x 8mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Vertical Scrubbing Brush
Strong, wide, hardwood handle. Double row of hog hair bristles. Ideal for dusting and general clean-up. Use wet or dry.
• Handle Length: 126mm
• Full Length: 139mm
• Brush Size: 13mm (L) x 24mm x 10mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Ratchet Propelled Twin Piston Cartridge Mixing Gun
(Suitable for 50ml Dual Cartridges, 10:1 Ratio)
The DCT-DG8050-110 Ratchet Propelled Twin Piston Cartridge Mixing Gun is specially designed for 50ml 10:1 dual component dispensing cartridges of MMA, Acrylic Cement, Epoxy, or PU. Its heavy duty housing is constructed from high impact light-weight plastic for durability and easy portability, and its twin pistons are designed to provide an even and reliable flow for consistent and precise dispensing.
As a manual, no-mess, easy clean-up solution to 2 component dispensing, the DCT-DG8050-110 demonstrates reduced extrusion resistance and is well suited for many assembly operations in a wide sector of markets, including aerospace, electronics, construction, and automotive.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Ratchet Propelled Twin Piston Cartridge Mixing Gun
(Suitable for 50ml Dual Cartridges, 1:1 & 2:1 Ratio)
The DCT-DG8050-11 Ratchet Propelled Twin Piston Cartridge Mixing Gun is specially designed for 50ml 1:1 and 2:1 dual component dispensing cartridges of MMA, Acrylic Cement, Epoxy, or PU. Its heavy duty housing is constructed from high impact light-weight plastic for durability and easy portability, and its twin pistons are designed to provide an even and reliable flow for consistent and precise dispensing.
As a manual, no-mess, easy clean-up solution to 2 component dispensing, the DCT-DG8050-11 demonstrates reduced extrusion resistance and is well suited for many assembly operations in a wide sector of markets, including aerospace, electronics, construction, and automotive.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml & 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 16 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-25 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(10:1 Ratio, Suitable for 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The smooth, tapered nozzle allows for dispensing directly onto surfaces to be glued, while its rounded shape ensures an easy fit into tight spaces.
The spiralling/bow-tie elements of the inner core repeatedly divide and combine both materials in a circular flow to provide consistent, high quality intermixing, effectively channelling the material radially from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-50 is specially designed for use with most 10:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Floor ScrapersCRC F3 Non- Drip Contact Adhesive
DESCRIPTION
CRC F3 is a thixotropic, high strength contact adhesive. It is formulated to be non-spill and non-drip, giving greater control of application and better coverage. This gel feature makes it ideal for vertical and ceiling applications and for bonding onto porous surfaces, e.g. Gib board. CRC F3 will not soak in as other liquid adhesives do, giving excellent results on porous surfaces such as the end grain of particle board. CR F3 has good resistance to heat, water, acids and alkalis, essential for a wide variety of commercial applications.Applications
Use a straight edge or a notched trowel or the scraper provided. Apply an even layer of adhesive to both surfaces. Between 10-20 minutes the solvent should have evaporated and the adhesive should be tacky enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are sticky to the touch, without transferring to your finger, they are ready to bond together. It is imperative that no solvent is trapped between Position components accurately, as when contact is made the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl flooring roller, provides good direct pressure.
Features/Benefits:
Thixotropic – Ideal for vertical and porous surfaces Non-spill, Non-drip – Greater control of application and better coverage Resilient – Good resistance to heat, water, acids and alkalis
(0 reviews) -
Specialty CuttersCRESCENT 1-1/8″ Metal Pipe Cutter
Crescent’s copper pipe cutters address the needs of residential and commercial plumbing applications. The ergonomic adjustment wheel allows for superior grip in any jobsite condition.
-
Features
(0 reviews) -
-
-
-
-
SnipsCRESCENT 10-1/2″ MultiMaster® Compound Action Long Cut Aviation Snips
Crescent Wiss® has taken the Aviation Snip to the next level with the advanced MetalMaster® Aviation Snips. The precision-cast molybdenum blades have CNC-ground serrations which allow for more uniform serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free-float design. The spring-action design allows for fast, effortless feed. The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting. The new generation of Crescent Wiss MetalMaster® will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional Aviation Snips. They are available in left/straight cut or right/straight cut.
Features(0 reviews) -
-
Hand & HacksawsCRESCENT 10″ High Tension Compact Hacksaw with Dual Material Handle
Crescent Hacksaws provides a fresh take on miniature hacksaws with a patented tensioning system and an ergonomic grip for more versatility on the job site. Crescent’s compact hacksaw features a cushion grip and tool-free blade changes for increased ease of use for professionals. Crescent is reinventing the industry standard by designing the first adjustable tension system in a compact hacksaw allowing for superior cuts.
-
Features
-
Specifications
(0 reviews) -
-
-
Nail PullingCRESCENT 10″ Nail Puller
Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.
-
Features
-
Specifications
(0 reviews) -
