Gauges & Indicators
Showing 1–36 of 37 results
-
Gauges & IndicatorsBORDO Thread Pitch Gauges
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Dial Indicators & Magnetic BasesITM Groz Articulating Arm with Magnetic Base
Accepts test indicators with dovetail clamping mechanism.
Arm has 3 articulating joints that can be locked with a single knob handle.
Dial gauges can be used with 3/8″ or 8mm diameter stem.
Magnetic bases have ON/OFF switch.
Base has a vee groove that securely fastens to the ferrous work piece or machine table.
Working Angle : 150°.
Hole Diameter : 8mm (3/8″).
Slot : 6.5mm(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Bore Gauge
BORE GAUGE (TAPER GAUGE).
Manufactured from stainless steel with permanently engraved graduations.
Accurate taper throughout the length of the gauge makes it a convenient tool for measuring diameters of small holes, slots etc.
With imperial graduations on one side & 1-15mm metric on the other, this is an ideal tool for die makers, machinists and on inspection floors.(0 reviews) -
Gauges & IndicatorsITM Groz Centre Gauge
Manufactured from stainless steel, these small flat gauges have angles of 55° and 60°.
Very useful for grinding and setting thread cutting tools, these may also be used for checking the pitch of threads through the permanently deep etched graduations in 14ths, 20ths, 24ths and 32nds of an inch.
These gauges meet the American National or US 60° and Whitworth or English 55° specifications.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Depth and Angle Gauge
The ability to measure depths and angles is combined in this versatile tool.
The head is made from high grade steel and has a black finish. It is graduated both left and right to 15°, 30°, 45° and the rule can be set to any of these angles.
A 150mm (6″) steel rule is fitted to the head and can be locked in final position by a knurled nut for depth or angular measurements.
150mm length(0 reviews) -
Dial Indicators & Magnetic BasesITM Groz Dial Indicator
Robust construction.
8mm stem diameter for metric models.
3/8″ stem diameter for imperial models.
Dial reading 0 – 100.
Built to American Gauge Design.
Graduation / resolution : 0.01mm on metric models & 0.001″ on imperial models.
Accuracy : ±0.03mm (±0.002″).
Range per revolution : 1mm (0.1″).
Each revolution is indicated by a revolution counter.
Tolerance marker provided.
White face dial(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Dial Indicators & Magnetic BasesITM Groz Dial Test Indicator
Highest quality mechanism.
Clear graduations.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Depth GaugesITM Groz Digital Depth Gauge
Made from stainless steel with thumbscrew locking mechanism.
Metric & imperial readout.
Digital Resolution : 0.01mm (0.0005″).
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Digital Height Gauge
Single beam construction.
Used for measurements and transfer of heights, scribing and marking of work pieces and other measurements like run out, centre distance etc.
Carbide tipped scriber with clamp.
Freewheel mechanism.
Metric & imperial readout.
Zero setting at any position.
Accuracy : 40 micron (0.0016″).
Resolution : 0.01mm (0.0005″).
Includes SR44 batteries(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Dial Indicators & Magnetic BasesITM Groz Digital Indicator
Robust construction.
Metric & imperial readout.
Supplied with flat and lug Backs.
Suitable for absolute, tolerance, metric & imperial measurements.
8mm stem diameter.
Auto ON / OFF feature to preserve battery life.
Tolerance measurement feature allows for the upper and lower tolerance for maximum and minimum.
Accuracy: 7.6 micron (0.0003″).
Includes CR2032 3V battery(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Dial Indicators & Magnetic BasesITM Groz High Power Magnetic Base with Fine Adjust
These magnetic bases equipped with powerful permanent magnets can be readily located on any ferrous surface and are ideal for all applications that require a magnetic pull of up to 60 kgf (130lbf).
The base and one side are energised for attachment to flat surfaces. Vee groove in the base facilitates gripping on curved surfaces.
Unique design allows Dial Indicator to be set at any required position and easily adjusted for use. The bases have a grey hammertone finish, base post and gauge holding rod are chrome plated.
Dial Gauge not included(0 reviews) -
Gauges & IndicatorsITM Groz Internal Dial Caliper Gauge
For checking internal bores, grooves and recesses.
Each revolution is indicated by a revolution counter.
Resolution : 0.025mm (0.001″).
Accuracy : ±0.05mm (±0.002″).
Measuring tip diameter : 0.06″.
White dial face(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Magnetic Compass
An extremely versatile tool that can be used as an Angle Finder, Centre Locator & Levelling Gauge.
Tool is designed to give accurate reading of angles for full 360° via an extremely sensitive & balanced needle.
The protractor body is encased in cast aluminium shell with legs made from cast iron. The Vee bases have inbuilt magnets that exert magnetic pull both within the Vee & across the bottom surface of the legs of the Vee. This allows the tool to attach instantly to any ferrous surface “” round or flat for accurate measurement of angles.
The Vee bases are precision ground and the centre pin shows the middle point for locating centres on round objects. Can also be used for levelling work on workpieces.This tool has unlimited applications and can be used in:.
– Tool rooms & machine shops for determining angles on shapers, milling machines & grinders. For determining centre of round stocks, & for drilling operations.
– Welding Shops.
– Construction & Maintenance sites.
– Auto & Truck shops, especially for checking angles of die lines.
Angle Accuracy: within ± 0.5°.(0 reviews) -
Gauges & IndicatorsITM Groz Metric Feeler Gauges
Essential tool for checking valve tolerances, point gaps and other critical measurements.
Made from stainless steel.
Each leaf is marked with its thickness.
Locknut secures one or more leaves in position and each leaf is detachable if necessary.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Multi-Use Rule & Gauge
Can be used as:.
A Drill Point Gauge for checking 59° angle drill points.
A Protractor for measuring and laying out angles.
A Centre Finder for locating centres on shafts and circles.
A Circle Divider for dividing circles into sectors, polygons and polygrams (up to nine equal parts).
Tap and Drill Table shows popular tap sizes and corresponding drills sizes for American National threads.Manufactured from stainless steel, this multi use tool comes complete with a 100mm (4″) rule with permanently etched graduations in millimeters and 64th.
(0 reviews) -
Gauges & IndicatorsITM Groz Radius Gauges
Very useful for tool and diemakers, machinists, screw machine operators and pattern makers to lay out and check radii of tools, dies, and patterns.
Made of stainless steel.
Size is marked on each gauge leaf.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Screw Cutting Gauge
Manufactured from hardened and polished stainless steel, all gauge surfaces are accurately ground.
It is most useful for checking tool angle while cutting threads in metal turning lathes. The angle on the thread cutting tool is checked on the V slots in the gauge.
Relief at the end of each slot enables proper seating of the cutting tool in the slot thus ensuring correct angle.
The gauge clearly indicates 55° for Whitworth and BSF Threads; 47-1/2° for BA Threads, 60° for Metric and American National Threads and 14-1/2° for Acme threads.(0 reviews) -
Gauges & IndicatorsITM Groz Sheet Metal & Wire Gauge
Made from heavy gauge hardened stainless steel.
Designed for measuring steel wire, hot & cold rolled steel sheet etc & check sizes from 0 to 36 gauge.
The gauge has metric dimensions marked on one side and gauge markings on the other.
Accuracy : within 100 microns.(0 reviews) -
Gauges & IndicatorsITM Groz Universal Surface Gauge
A basic tool for machinists and toolmakers, the Universal Surface Gauge is used for accurately scribing lines, transferring measurements or probing surfaces in inspection work.
Design incorporates:.
A fully hardened and ground base which serves as an accurate reference surface.
A machined Vee groove in the base allows the gauge to be used conveniently on curved surfaces.
A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as a height gauge and also as a depth gauge.
Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work.
A 6.34 mm hole in the spring loaded scriber holder allows a dial indicator to be attached conveniently making the gauge useful for checking flatness, parallelism, heights, depths etc.
Grooves on the side of the base allow for comfortable grip.
Well tapered scriber for better sighting while working. The scriber tip is hardened to 55-60 HRC.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Depth GaugesITM Groz Vernier Depth Gauge
Made from stainless steel with thumbscrew locking mechanism.
Metric & Imperial.
Extendable depth gauge.
Accuracy : ± 0.05mm.
Resolution : 0.05mm.
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
Torque GaugesSP TOOLS 1/2″Dr Angular Torque Gauge
FEATURES
- 360° scale (Dial Pointer)
- Support arm included
- Allows correct tensioning of fasteners by degrees of torque
- This tool is required when manufacturers specify a torque setting using a measurement of degrees after the initial torque is set
- Can be used for all torque-to-yield applications (particularly engine head bolts)
(0 reviews) -
Dial IndicatorsSP TOOLS Dial Indicator
FEATURES
- 0-10mm dial indicator
- Graduation: 0.01mm
- Hardened, lapped stainless steel stem and spindle
- High sensitivity, stable and reliable accuracy
- Easy-to-read crisp graduations
- 8mm shank diameter
- Diameter of bezel: 60mm
(0 reviews) -
Pitch & Feeler GaugesSP TOOLS Feeler Gauge Set – 25pc
FEATURES
- 0.04-1.00mm
- Marked with metric sizes
- Hardened spring steel straight blades
- Straight blades 75mm long x 13mm wide
(0 reviews) -
Pitch & Feeler GaugesSP TOOLS Feeler Gauge Set – 32pc
FEATURES
- 0.0015” – 0.035”
- Marked with equivalent metric sizes
- Straight blades 85mm long x 13mm wide
(0 reviews) -
Pitch & Feeler GaugesSP TOOLS Feeler Gauge Set – Double Sided Offset – 25pc
FEATURES
- 005’’-030’’ (0.127-0.762mm)
- Marked with equivalent metic/inch sizes
- Offset blades 100mm long x 13mm wide with 25 mm offset tips
(0 reviews) -
Pitch & Feeler GaugesSP TOOLS Feeler Gauge Set – Offset – 12pc
FEATURES
- Offset blade for easy tappet clearance measuring
- 0.008, 0.010, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.019, 0.020, 0.025 & 0.026” blades
- Marked with equivalent metric sizes
- Offset blades 100mm long x 13mm wide with 25mm offset tip
(0 reviews) -
Pitch & Feeler GaugesSP TOOLS Feeler Gauge Set – Type A – 26pc
FEATURES
- 0.0015” – 0.025”
- Marked with equivalent Metric sizes
- Straight blades 85mm long x 13mm wide
(0 reviews) -
Dial IndicatorsSP TOOLS Magnetic Stand – Adjustable – Suits Dial Indicators
FEATURES
- Attaches horizontally or vertically to flat surfaces
- V groove base mounting on cylindrical surfaces
- Suits dial indicators with 4mm or 8mm shafts
- Fine adjust arm and solid knobs
- Flexible, precise rotary joints adjust any direction
- Powerful magnetic base with on/off switch
- 60kg magnetic pulling force
- High stability – ideal for precision measurement applications
Note: Dial indicator is not included.
(0 reviews) -
Telescopic GaugesSP TOOLS Telescopic Gauge Set – 6pc
FEATURES
- Range 8-150mm, 5/16’’-6’’
- For quick and accurate measurement of bore diameters
- Hardened stainless steel automatic self-centring plungers
- Locks on any setting by turning knob at the end of the handle
- Spring loaded cylinders
- Size obtained by measuring over contacts with a micrometer or calliper
- Housed in heavy duty storage case with EVA foam inserts
(0 reviews) -
Engine & TransmissionSYKES-PICKAVANT Feeler Gauge – Cranked
- Professional 26 blade, cranked feeler gauge set
- Offset 45° angle permits access in confined hard to reach spaces
- Constructed of heavy duty spring steel
- Both Metric and SAE gauges
- Metric sizes: 0.127mm, 0.152mm, 0.178mm, 0.203mm, 0.229mm, 0.254mm, 0.279mm, 0.305mm, 0.330mm, 0.356mm, 0.381mm, 0.406mm, 0.432mm, 0.457mm, 0.483mm, 0.508mm, 0.533mm, 0.559mm, 0.584mm, 0.610mm, 0.635mm, 0.660mm, 0.686mm, 0.711mm, 0.737mm, 0.762mm
- SAE sizes: 0.005″, 0.007″, 0.009″, 0.011″, 0.013″, 0.015″, 0.017″, 0.019″, 0.021″, 0.023″, 0.025″, 0.027″, 0.029″, 0.006″, 0.008″, 0.010″, 0.012″, 0.014″, 0.016″, 0.018″, 0.020″, 0.022″, 0.024″, 0.026″, 0.028″, 0.030″
(0 reviews) -
Gauges & IndicatorsTOLEDO Feeler Gauges
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
