Chemicals, Lubricants & Adhesives
Showing 289–324 of 344 results
-
Chemicals, Lubricants & AdhesivesLANOTEC Steel-Seal
USAGE EXAMPLES:
• 4WD and Light Vehicle underbody & chassis rails protection
• Protection of jet skis, trailers and all marine motors
• Sea preparation
• Chemical storage facilities and equipment protection
• Agricultural vehicles including boom sprayers & fertiliser spreaders
• Drill pipe protection including threads & internal casings
• Electrical component protection – non conductive to 41kV(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesLANOTEC Timber Seal
• For dressed timber including decking, outdoor furniture, fencing,
gates, and cladding
•Prevention of drying, cracking, splitting & wood rot
• For weatherproofing end grains & checkouts
• Corrosion protection of metal fastenings & fittings
• Light lubricant for locks and hinges(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesLANOTEC Timber Seal PLUS
• For rough sawn timber including boardwalks, bridges,
jetties, wharf infrastructure, fence posts & railings
• Prevention of drying, cracking, splitting & wood rot
• For weatherproofing and highlighting natural grain
• For a natural matte finish
• Corrosion protection of metal fastenings & fittings(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesLANOTEC Type ‘A Grease & Soft Grease
• Anti-seize, anti-galling
• Assembly lubricant & rubber grease
• Protects electrical components from moisture including
connectors – multi pin plugs
• Prevents galling of stainless steel and aluminium
• Stops electrolysis due to dissimilar metals
• Ideal anti-seize for non grease-able pins (lanolin never dries out).
• Belt dressing
• Metal to metal soft seal gasket
• Drilling & cutting aid
• Welding nozzle dip – non flammable(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesLANOTEC Wire Rope Lube
• Suitable for all wire ropes above 16mm or any wire ropes operating in corrosive environments
• Ideal for rig and marine cranes, or any wire ropes working in the splash zone
• Ideal for use around waterways and coastal environments
• Lubrication of ropes in environmentally sensitive areas where salt water is an issue
• Ideal for use on industrial high load bearing chains(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesSIKA Abelflex
Expansion Joint and Space Filler (Zip Rolls)A flexible, lightweight, closed cell, cross-linked, polyethylene foam expansion joint and space filler. In concrete and brickwork Abelflex has excellent recovery properties.
• Non-absorbent.
• Excellent recovery after compression.
• Readily compressible.
• Seals gaps against dust and water entry.
• Non-bleeding and resistance to fungi and insect attack (approved to AS2170) making it ideal for use in food contact applications.
• Easy to work with and cut.
• Resistant to most chemicals.
• Compatible with most liquid sealants.
• Lightweight and can be easily handled on-site.
• Can be easily moulded to suit more applications.- Ideal as a gap filler and bond breaker for floor and wall expansion joints, filling systems for roads, motorways, bridges, walls and automotive applications.
- In joints where polystyrene or bitumen impregnated fillers have been used, Abelflex is ideal as a bondbreaker. Often necessary because of the sealant incompatibility with these forms of fillers.
- Suitable as a back-up filler for most liquid sealants
- Ideal for stopping contaminants such as soil entering into expansion slots and joints
Advantages
• Non-absorbent.
• Excellent recovery after compression.
• Readily compressible.
• Seals gaps against dust and water entry.
• Non-bleeding and resistance to fungi and insect attack (approved to AS2170) making it ideal for use in food contact applications.
• Easy to work with and cut.
• Resistant to most chemicals.
• Compatible with most liquid sealants.
• Lightweight and can be easily handled on-site.
• Can be easily moulded to suit more applications.(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Abelflex Rod filler
Closed Cell Backer Rod (Abelrod)An exceptionally strong and lightweight closed cell, polyethylene foam rod expansion joint and space filler.
- Closed Cell.
- Assists with joint design by providing a bond breaker and helping to determine the depth of the joint.
- Excellent recovery properties enable Abelflex Rod filler to withstand many years of compression and expansion, ensuring a tight seal from dirt and water entry.
- Ideal as a vertical and horizontal joint filler in concrete, masonry substrates between precast concrete panels, interior walls, sealing skylights, shop fronts and curtain wall construction.
- Can also be used in areas such as swimming pools, in draft proofing, dust sealing, sealing electrical control boxes, truck and trailer construction and as piping around chairs.
Advantages
- Closed Cell.
- Assists with joint design by providing a bond breaker and helping to determine the depth of the joint.
- Excellent recovery properties enable Abelflex Rod filler to withstand many years of compression and expansion, ensuring a tight seal from dirt and water entry.
- Highly resistant to weathering and most common chemicals.
- Meets the requirements of Australian Standard AS2170, “Plastic Materials for Food Contact Use”.
- Ideal filler prior to application of most sealants.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesSIKA Boom® FR
Fire-retardant polyurethane foamSika Boom® FR is a one-component, fast curing, polyurethane foam retarding fire up to 4 hours.
- One-component
- Easy application with nozzle
- Fast curing
Sika Boom® FR is designed for linear joints in brickwork and concrete where fire protection is required.Advantages
- One-component
- Easy application with nozzle
- Fast curing
- Very good thermal insulation
- Effective sound dampening
- HFC-free
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika AnchorFix®-1
Fast curing styrene free chemical anchoring adhesiveSolvent and styrene free based, two-component polyester anchoring adhesive.
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
As a fast curing anchoring adhesive for all grades of:
- Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
- Concrete
- Hollow and solid masonry
- Hard natural stone*
- Solid rock*
* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-1 Adhesive must be tested by first applying Sika AnchorFix®-1 Adhesive only to a sample area. Check in particular bond strength, surface staining and discolouration.
Advantages
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
- High load capacity
- ETA Approval available
- Non-sag, even overhead
- Styrene-free
- Low odour
- Low wastage
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika AnchorFix®-3001
EPOXY HIGH PERFORMANCE CHEMICAL ANCHORING ADHESIVESika AnchorFix®-3001 is an epoxy resin based, 2-part, thixotropic, 1:1 mixing ratio, high performance anchoring adhesive. It is specifically designed for anchoring threaded rods and reinforcement bars in both cracked and un-cracked dry or damp concrete.
- Long open time
- Can be used in damp concrete
- High load capacity
Anchoring adhesive for fixing of non-expanding anchors in the following:
Structural work- Rebar / steel reinforcement anchoring in new and refurbishment works
- Threaded rods
- Bolts and special fastening / fixing systems
Metalwork, carpentry
- Handrails, balustrades and supports
- Railings
- Window and door frames
Substrates
- Concrete (cracked and un-cracked)
- Hollow and solid masonry
- Wood
- Natural and reconstituted stone
- Solid rock
Advantages
- Long open time
- Can be used in damp concrete
- High load capacity
- ETA to ETAG 001 for anchoring in cracked concrete
- ETA to ETAG 001 for rebar connections
- ESR to AC308 by ICC-ES, anchoring in cracked concrete for static, wind and earthquake loading
- Seismic tested (C1)
- Suitable for contact with drinking water
- Fire resistant
- Styrene-free
- Good adhesion to the substrate
- Shrinkage-free hardening
- Standard sealant guns can be used (250 ml cartridge)
- Low wastage
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika Boom® AP
MULTI-POSITION, HIGH YIELD EXPANDING FOAMSika®Boom®-AP is a 1-component, high expanding, fast curing polyurethane foam suitable for multi-position applications.
- 1-component
- Multi-positioning foam; application in all positions
- Easy application with nozzle
Sika Boom® AP is used for fixing, insulating and filling connection joints around window and door frames, pipe entries, air conditioning vents and roller blind housings.
Sika Boom® AP provides insulation against noise, cold and draughts after single application.Advantages
- 1-component
- Multi-positioning foam; application in all positions
- Easy application with nozzle
- High expansion rate
- Fast curing
- Very good thermal and sound insulation
- Can be cut and over painted
- HFC Free
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika Boom® AP
MULTI-POSITION, HIGH YIELD EXPANDING FOAMSika®Boom®-AP is a 1-component, high expanding, fast curing polyurethane foam suitable for multi-position applications.
- 1-component
- Multi-positioning foam; application in all positions
- Easy application with nozzle
Sika Boom® AP is used for fixing, insulating and filling connection joints around window and door frames, pipe entries, air conditioning vents and roller blind housings.
Sika Boom® AP provides insulation against noise, cold and draughts after single application.Advantages
- 1-component
- Multi-positioning foam; application in all positions
- Easy application with nozzle
- High expansion rate
- Fast curing
- Very good thermal and sound insulation
- Can be cut and over painted
- HFC Free
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika Boom® Cleaner
Cleaner for Sika Boom® application gunsSika Boom® Cleaner is an active cleaner for cleaning Sika Boom® application guns and fresh Sika Boom® residue from surfaces.
- Very good PU foam cleaner
- Very good PU spray gun and equipment cleaner
- Integral valve for precise application
- Clean Sika® PU foam application equipment after use.
- Removes fresh, uncured polyurethane foam residue from equipment and other surfaces, as well as cleaning and removing grease from contaminated substrates.
Advantages
- Very good PU foam cleaner
- Very good PU spray gun and equipment cleaner
- Integral valve for precise application
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika Boom® G
Highly expansive, gun applied polyurethane fixing foamSika Boom® G is a one-component, fast curing, gun applied polyurethane foam with a very high expansion rate.
- One-Component
- Easy application with application gun
- High expansion rate
Sika Boom® G is designed for fixing, insulating and filling connection joints around window and door frames, air-conditioning vents and roller blind housings.
Sika Boom® G allows insulation against noise, cold and draughts after a single application.Advantages
- One-Component
- Easy application with application gun
- High expansion rate
- Fast curing
- Very good thermal insulation
- Effective sound dampening
- HFC-free
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Colma Cleaner
Solvent-based cleaning agent for substrates and toolsSika® Colma Cleaner is a grease-free solvent specially formulated for the pre-cleaning of bond faces and the cleaning of tools and equipment.
- Easy to use
- Very powerfeul, fast cleaning
Sika® Colma Cleaner is designed for cleaning surfaces prior to bonding and for cleaning of tools and equipment such as light metals and alloys, steel and stainless steel.Advantages
- Easy to use
- Very powerfeul, fast cleaning
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesSIKA Sika® Filler-101
Ready to use water based fine surface and joint fillerSika® Filler-101 is a water based, ready to use joint filling and wide spreading of internal surfaces
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Sika® Filler-101 is suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
- Sika® Filler-101 has a very smooth finish
- Sika® Filler-101 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
Advantages
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Quick drying
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Filler-105
Ready to use water based thick layer surface fillerSika® Filler-105 is a water based, ready to use thick layer surface filler for internal surfaces.
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- Sika® Filler-105 is suitable for indoor filling and repair where thicker filling capability are needed
- A finer grade filler such as Sika® Filler-101 should be used for finishing surfaces before painting
- Sika® Filler-105 complies with EN 15824 “Specifications for external and internal plasters based on organic binders”
Advantages
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- High initial tack or grab on plaster and concrete
- Quick drying
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Filler-107
Ready to use water based general purpose surface filler for use in wet areasSika® Filler-107 is a water based, ready to use general purpose surface and joint filler intended for use in wet areas
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Sika® Filler-107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers in wet environments such as kitchens and bathrooms.
- Sika® Filler-107 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
Advantages
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Quick drying
- Not sensitive to moisture
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Firerate
FIRE RATED JOINT SEALANTSika® Firerate is an intumescent fire rated, 1-component, acrylic joint sealant.
- Up to 4 hours fire resistance according to AS 1530.4
- Very good resistance to weathering
- Movement capability of ± 20 %
Sika® Firerate is designed for fire rated movement and connection joints on porous and non-porous substrates. It is suitable for interior applications.Advantages
- Up to 4 hours fire resistance according to AS 1530.4
- Very good resistance to weathering
- Movement capability of ± 20 %
- Easy to smooth and very good workability
- Good adhesion to many different substrates
- Water clean-up of uncured sealant
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-206 G+P
Pigmented, solvent-based primer for various substratesSika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes.- Enhanced adhesion on a wide variety of substrates
- Easy to apply
Usage
Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces and some plastics and metals.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-209 D
Pigmented, solvent based primer for paints and plasticsSika® Primer-209 D is a solvent-based, black primer that reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-209 D is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation step on certain plastic substrates.Sika® Primer-209 D is used to improve adhesion on many plastics and paints such as GRP, epoxy resins, PVC, ABS, PMMA, PC, PS, acrylics, alkyds/melamine, powder coatings and baking varnishes.
Due to the wide variety of plastics, it is mandatory to perform preliminary tests on original substrates under production conditions.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-209 D on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-215
Non-pigmented, solvent-based primer for plastics and woodSika® Primer-215 is a solvent-based, colourless to slightly yellow primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-215 is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes.Sika® Primer-215 is used to improve adhesion on many plastics and wood such as GRP, epoxy resins, PVC, ABS and timber.
Due to the wide variety of plastics it is mandatory to perform preliminary tests on original substrates under production conditions.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-215 on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-3 N
Sika® Primer-3 N is a one component, transparent primer for porous surfaces and metalSika® Primer-3 N is a solvent-based, 1-component primer.
- Easy to apply
- Water repellent
- Short flash-off time
Sika® Primer-3 N is designed for Sikaflex®, SikaHyflex®, SikaBond® and Sikasil® products used on porous substrates (e.g. concrete) and metals.Advantages
- Easy to apply
- Water repellent
- Short flash-off time
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Showerbond
Solvent based gun grade wallboard adhesiveSika® Showerbond is a solvent based, fast grab, gun grade adhesive. It has been specifically formulated for bonding acrylic plastic shower linings to unpainted gypsum plasterboard or fibre cement wall linings, as well as timber.
- Fast curing
- Will not damage acrylic plastic shower liners
- Panels can be relocated for up to 30 minutes after positioning
Sika® Showerbond is used for bonding acrylic plastic shower linings to wall linings.
- Fast curing
- Will not damage acrylic plastic shower liners
- Panels can be relocated for up to 30 minutes after positioning
- Excellent adhesion to most common building materials
- Easy to apply and clean up
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA SikaBond® INSTANT NAILS FAST
Fast Cure Multipurpose Construction AdhesiveSikaBond® INSTANT NAILS FAST is a premium, water based, multi purpose construction adhesive providing strong initial grab and high bond strength.
- Reduces number of mechanical fasteners required to install floors or walls.
- Can be repositioned for up to 60 minutes after application
- Reduces squeaking associated with nail ride in floors
SikaBond® INSTANT NAILS FAST can be used on most substrates due to its excellent adhesion. These include:
- Fixing polystyrene wall panels
- Replacing loose tiles on walls
- Skirting boards, architraves and trims to walls
- Bonding panels to wall studs
- Bonding particleboard, plywood, fibre cement and strip flooring to joists
- Reduces number of mechanical fasteners required to install floors or walls.
- Can be repositioned for up to 60 minutes after application
- Reduces squeaking associated with nail ride in floors
- Paintable with water based surface coatings
- Easy to use one component
- Bridges gaps up to 9 mm
- Strong adhesion to metal
- No fumes
- High bond strength and heat resistance
- Flows easily at all temperatures
- Easy clean up
- Fast initial grab – minimises slippage on vertical surfaces
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA SikaBond® PVA
Interior & Exterior Wood Working GlueSikaBond® PVA is an ideal product for bonding a wide range of timber components including tongue and groove solid timber and laminated flooring substrates giving tough, flexible permanent bonding.
- Excellent water resistance
- High bond strength within 24 hours
- Suitable for interior and exterior applications
SikaBond® PVA can be used on most substrates due to its excellent adhesion. These include:
- Timber
- MDF boards
- Particle boards
- Ply woods
- Excellent water resistance
- High bond strength within 24 hours
- Suitable for interior and exterior applications
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesSIKA SikaBond® SprayFix
Multipurpose, high performance, aerosol spray adhesiveSikaBond® SprayFix is a multipurpose, high performance, aerosol spray adhesive which can be used for both temporary and permanent bonding applications.
- Easy to use
- Low odour
- Dries clear
Typical applications include:
- Upholstery
- Floor and other repairs
- Furniture lamination
- Art and craft work (e.g. mounting prints)
SikaBond® -SprayFix can be used on many substrates, including:
- Felts and fabrics
- Metals
- Foams
- Cork
- Most plastics
- Rubber gaskets
- Fibreglass
- Wood e.g. plywood, particle board
Advantages
- Easy to use
- Low odour
- Dries clear
- Fast drying time (approximately 2-4 minutes)
- High initial strength
- Contains no chlorinated solvents – suitable for indoor use
- Repositionable for 1-2 minutes
- Versatile – bonds well to many substrates
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesSIKA SikaBond® TechGrip
High Strength Multipurpose Polyurethane GlueSSikaBond® TechGrip is a high strength multipurpose, polyurethane glue that provides a super strong bond to most common substrates and is ideal for woodworking and project work.
- Internal and External use
- Waterproof
- Resistant to solvents and chemicals
SikaBond® TechGrip can be used on most substrates due to its excellent adhesion. These include:
- Wood
- Stone
- Metals
- Glass
- Ceramics
- Concrete
- Brick
- Masonry
- Internal and External use
- Waterproof
- Resistant to solvents and chemicals
- Paintable with water based and solvent based paints
- High adhesion strength
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesSIKA SikaBond®-105 ContactFix
FAST CONTACT ADHESIVESikaBond®-105 ContactFix is a premium sprayable contact adhesive that has been formulated to meet varied needs for laminate fabrication. This adhesive gives fast drying time, and a strong heat resistant and water resistant bond.
- One-component adhesive
- Very short flash-off time
- High initial strength
SikaBond®-105 ContactFix has a very broad adhesion range and gives a strong and lasting bond. Suitable substrates are timber, rubber sheets, plastic laminates, fabric, cloth backed and polyester backed vinyl, MDF, particleboard, concrete, glass and metal sheets. In the production of transport vehicles SikaBond®-105 ContactFix is suitable for the room temperature contact bonding of different covering materials e.g. PUR foams, textiles and for adjoining steps, wheel arches, seat brackets and side walls, especially for covering materials with high spring-back forces, like cover trims and edging profiles. SikaBond®-105 ContactFix is also suitable for auto upholstery and furniture upholstery. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
- One-component adhesive
- Very short flash-off time
- High initial strength
- Easy to apply
- Resistant against aging
- High heat resistance
- Broad adhesion range
- Fast dry time (Approximately 3-5 minutes)
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesSIKA SikaBond®-115 Max Tack
INTERIOR GRAB ADHESIVESikaBond®-115 Max Tack is a 1-part construction adhesive with high final strength which bonds most construction material substrates. Internal and sheltered outdoor use.
- Easy to apply
- Easy to clean
- Rapid build-up of strength
An adhesive to bond most construction components such as:
- Skirting boards
- Wooden frames
- Battens
- Mouldings
- Panels,
- Terracotta tiles
- Anodised aluminium
- Polystyrene mouldings and ceiling tiles
An adhesive to bond most construction materials such as:
- Concrete, mortar, fibre cement, wood and paint
Advantages
- Easy to apply
- Easy to clean
- Rapid build-up of strength
- High final strength
- Very low emissions
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA SikaBond®-142 Instant Nails
HIGH STRENGTH MULTIPURPOSE ADHESIVESikaBond®-142 Instant Nails is a high strength contruction adhesive that will not slump on vertical surfaces. It can be used as a one way liquid adhesive, or a two way contact adhesive, on a variety of surfaces.
- One component ready to use
- Fast drying time
- Easy to use
SikaBond®-142 Instant Nails can be used on a variety of substrates due to its excellent adhesion.
- Floor and wall panels
- Timber, particleboard, MDF & plywood
- Aluminium, iron and steel
- Concrete, cement sheeting, fibreglass and masonry
- One component ready to use
- Fast drying time
- Easy to use
- High adhesion strength
- Non-slump
- Paintable
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA SikaBond®-145 SuperGrip
Premium polyurethane construction adhesive with fast build up of StrengthSikaBond®-145 SuperGrip is a premium grade one-component polyurethane construction adhesive with good initial grab and high strength after 30 minutes^. SikaBond®-145 SuperGrip is a versatile, ready to use, fast curing, general purpose construction adhesive suitable for interior and exterior use.
- One-component.
- Interior & exterior.
- Non-shrink.
SikaBond®-145 SuperGrip is suitable for use in construction and repair applications where a permanent strong bond is required between porous-nonporous surfaces. SikaBond®-145 SuperGrip is suitable for bonding most common construction materials such as:
- Wood
- MDF
- Concrete
- Brick
- Metal
- Polystrene
- Polyurethane foam
- Some PVC
- Marble
- Granite
- Ceramic
- LOSP Timber
- One-component.
- Interior & exterior.
- Non-shrink.
- Non-sag.
- High initial grab.
- Adheres rapidly.
- Stong bond in 30 minutes^.
- Fast cure.
- Solvent-free.
- Resistant to heat.
- Resistant to weathering.
- Water resistant -D4 according to DIN En 204
- Applies white, can dry translucent if applied in thin layers.
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sikaflex® PRO
Sealant for concrete and masonry facadesSikaflex® PRO is a 1-component, moisture-curing, elastic joint sealant.
- Movement capability of ± 25 (ASTM C 719)
- Good workability
- Good adhesion to many substrates
Sikaflex® PRO is designed for movement and connection joints on porous substrates as well as indoor and outdoor general sealing applications.Advantages
- Movement capability of ± 25 (ASTM C 719)
- Good workability
- Good adhesion to many substrates
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sikaflex®-11 FC
One-component advanced polyurethane, elastic joint sealant and adhesiveSikaflex®-11 FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity. This dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing time that meets ASTM C920 Type S, Grade NS, Class 12.5 for internal and external applications.
- Excellent adhesion to all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin.
- Fast cure rate.
- Good weathering and water resistance.
As an elastic adhesive for:
- Most common construction materials.
- Floor moldings and skirting boards.
- Acoustic ceiling tiles.
- Metal.
- Wood.
Further Uses: As an elastic joint sealant for:
- Concrete.
- Seam sealing.
- Metal.
- Wood.
- Aluminum fabrication.
- Bolted lap joints.
- Skirting boards.
- Base boards.
- Excellent adhesion to all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin.
- Fast cure rate.
- Good weathering and water resistance.
- Non-corrosive.
- Can be over painted with water, oil, and rubber-based paints. (Preliminary tests recommended).
- High durability and ageing resistance.
- High pick resistance
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesSIKA Sikaflex®-111 Stick & Seal
Flexible adhesive and sealantSikaflex®-111 Stick & Seal is a 1-part, multipurpose adhesive and sealant with a very broad adhesion and sealing profile which bonds and seals most construction material substrates. Internal and external use.
- Bonds well to a wide variety of substrates without surface pre-treatment
- Bonds to damp concrete
- Compatible with most substrates, EPS/XPS and building wraps
An adhesive to bond most construction components and materials such as:
- Concrete
- Masonry
- Most stones
- Ceramic
- Wood
- Metal
- Glass
- Plastics such as PVC, PA, PET and EPS/XPS
A sealant to seal vertical and horizontal joints.
- Bonds well to a wide variety of substrates without surface pre-treatment
- Bonds to damp concrete
- Compatible with most substrates, EPS/XPS and building wraps
- Compatible with most bitumen grades
- Good mechanical resistance and weathering resistance
- Adhesive-sealant with CE marking
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sikaflex®-112 Crystal Clear
Transparent adhesive and sealantSikaflex®-112 Crystal Clear is a 1-part, multipurpose transparent adhesive and sealant with good initial grab which bonds and seals most construction material substrates. Internal and external use.
- Transparent
- Good initial grab
- Very low emissions
An adhesive to bond most construction components and materials such as:
- Concrete
- Masonry
- Most stones
- Ceramic
- Wood
- Metals
- Glass
- PVC
A sealant to seal around bonded components.
- Transparent
- Good initial grab
- Very low emissions
- Adhesive-sealant with CE marking
(0 reviews)