Thread Repair
Showing all 3 results
-
Thread Repair
BORDO NES 2 External Thread Restorer
- NES 2 External Thread Restorer suits sizes 17.00 – 38.00mm (11/16 – 1.1/2; 3/8 – 1.1/8 Pipe)
- One NES tool restores Metric, Imperial, Right Hand and Left Hand threads and replaces many taps and/or dies.
- They do not require calibration.
- Self adjusting to any size and pitch within tool range.
- Hardened HSS cutting blades for long tool service life.
- Tool uses undamaged section of thread to guide cutting blades during repair to damaged areas.
- Removes rust and burrs.
- Quick to set up and simple to use.
(0 reviews) -
Thread Repair
BORDO PowerCoil Thread Repair Kit
- PowerCoil Wire Thread Inserts are used to repair damaged or worn out threads, PowerCoil Wire Thread Inserts can also be used to create new stronger threads in original equipment.
- They provide a permanent, corrosion and wear resistant internal thread which is usually stronger than the original parent material thread.
- PowerCoil wire thread inserts are manufactured from precision profiled diamond shaped stainless steel wire and formed into a helical spiral.
- They provide high strength internal threads that resist the effects of temperature and corrosion.
- Their unique design ensures superior threads whose compound performance cannot be reproduced by any other single fastening method.
- They are much lighter and less expensive than any other equivalent type of thread insert and because of their compact size they can generally be incorporated into existing designs where no previous provision has been made.
- PowerCoil kits contain the wire thread inserts, tap, installation tool, and, in many cases, the tapping drill and break off tool needed for particular sizes of PowerCoil insert.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Thread Repair
BORDO Saber S1 Tap & Die Set – Metric & SAE
- Saber S1 Tap and Die Set – Metric & SAE
- Tungsten steel taps and dies.
- Create new threads in aluminium and mild steel.
- Clean and repair existing threads.
- 48 intermediate lead taps and 48 button dies.
- 4Gx40, 5Gx40, 6Gx32, 8Gx32, 10Gx24, 10Gx32, 12Gx24, 1/4″x20, 1/4″x28, 5/16″x18, 5/16″x24, 3/8″x16, 3/8″x24, 7/16″x14, 7/16″x20, 1/2″x13, 1/2″x20, 9/16″x12, 9/16″x18, 5/8″x11, 5/8″x18, 3/4″x10, 3/4″x16.
- 2×0.4, 3×0.5, 4×0.7, 5×0.8, 6×1.0, 7×1.0, 8×1.0, 8×1.25, 9×1.25, 10×1.0, 10×1.25, 10×1.5, 11×1.5, 12×1.75, 12×1.25, 14×2.0, 14×1.5, 16×2.0, 16×1.5, 18×2.5, 18×1.5.
- NPT1/8″x27, NPT1/4″x18, BSP1/8″x28, BSP1/4″x19.
- 5 HSS Twist DRILLS 2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm.
- 5 X Screw Extractors #1, #2, #3, #4, #5.
- 2 X Screw Pitch Gauges. 2 X Die Holders. 3 X Tap Wrenches. 1 X Screwdriver.
- 1 X Centre Punch.
(0 reviews)