Reamers
Showing all 12 results
-
AdjustableBORDO Adjustable Fractional Reamer
- Bordo Adjustable Reamers are made from premium HSS.
- Precise hole control through adjustable sizing.
- Replaceable blades for maximum tool life.
- With adjustable size control an adjustable hand reamer is designed as a general purpose reamer that can cover a small range of sizes and produce a clean, accurate hole.
- Because there is no spiral in the flutes, hole size is obtained by removing a small amount of material with each cut.
- Progressive cuts of around 0.05mm per pass are required to avoid chatter.
- Adjustable reamers are ideal for light usage in unbroken holes, in plastics and non-ferrous metals.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AdjustableBORDO Adjustable Nut
- Bordo Adjustable Reamers are made from premium HSS.
- Precise hole control through adjustable sizing.
- Replaceable blades for maximum tool life.
- With adjustable size control an adjustable hand reamer is designed as a general purpose reamer that can cover a small range of sizes and produce a clean, accurate hole.
- Because there is no spiral in the flutes, hole size is obtained by removing a small amount of material with each cut.
- Progressive cuts of around 0.05mm per pass are required to avoid chatter.
- Adjustable reamers are ideal for light usage in unbroken holes, in plastics and non-ferrous metals.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AdjustableBORDO Adjustable Pilot
- Bordo Adjustable Reamers are made from premium HSS.
- Precise hole control through adjustable sizing.
- Replaceable blades for maximum tool life.
- With adjustable size control an adjustable hand reamer is designed as a general purpose reamer that can cover a small range of sizes and produce a clean, accurate hole.
- Because there is no spiral in the flutes, hole size is obtained by removing a small amount of material with each cut.
- Progressive cuts of around 0.05mm per pass are required to avoid chatter.
- Adjustable reamers are ideal for light usage in unbroken holes, in plastics and non-ferrous metals.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ChuckingBORDO Chucking Fractional
- Bordo Chucking Reamers are made from premium HSS-Co.
- They feature a 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Chucking reamers are used in a drill chuck or collet and are ideal for machining applications to create a sliding fit, to secure dowel pins, etc.
- Chucking reamers are characterised by a very short lead at the start.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chucking
BORDO Chucking Metric
- Bordo Chucking Reamers are made from premium HSS-Co.
- They feature a 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Chucking reamers are used in a drill chuck or collet and are ideal for machining applications to create a sliding fit, to secure dowel pins, etc.
- Chucking reamers are characterised by a very short lead at the start.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HandBORDO Hand Fractional
- Bordo Hand Reamers are made from premium HSS.
- 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Hand reamers are used to manually finish a hole for a neat finish, and are typically held in a tapping wrench.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand
BORDO Hand Metric
- Bordo Hand Reamers are made from premium HSS.
- 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Hand reamers are used to manually finish a hole for a neat finish, and are typically held in a tapping wrench.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand Taper PinBORDO Hand Taper Pin Fractional
- Bordo Taper Pin Reamers are made from premium HSS.
- They are straight fluted.
- 1:50 inclination (taper) for metric sizes and 1:48 inclination (taper) for fractional sizes
- As the name suggests, Bordo Taper Pin Reamers are used for securing tapered pins, which are used to secure steel plates and blocks together.
- They are typically held in a tapping or similar wrench.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand Taper Pin
BORDO Hand Taper Pin Metric
- Bordo Taper Pin Reamers are made from premium HSS.
- They are straight fluted.
- 1:50 inclination (taper) for metric sizes and 1:48 inclination (taper) for fractional sizes
- As the name suggests, Bordo Taper Pin Reamers are used for securing tapered pins, which are used to secure steel plates and blocks together.
- They are typically held in a tapping or similar wrench.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BridgeBORDO MTS Bridge
- HSS Morse Taper Shank Tapered Spiral Flute Bridge Reamer
- Bridge reamers are used to create an aligned hole in a structural steel assembly. These reamers enlarge and align holes for rivets and bolts in structural steel members such as I-beams, angles, channels, and plates.
- The reamer is tapered for approximately half its FL allowing the reamer to enter out-of-line holes often encountered in structural work.
- All tools are constructed with left-hand spiral and right-hand cut.
- The left-hand spiral eliminates the tendency of the reamer to pull itself into the hole.
- In large structural assemblies, the holes are generally punched undersize and then reamed when in position.
- The idea is that the holes most likely will not line up within about 1/8″ when a fabricated 50 foot beam or column is finally put into place.
- Coolant or cutting tool lubricant should be utilitised when possible.
- Benefits include better finishes, superior tool life and the ability to increase speeds and feeds.
- Bridge reamers should be run at half the R.P.M. suggested for a corresponding twist drill size.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MTS MachineBORDO MTS Machine Fractional
- Bordo Morse Taper Shank Machine Reamers are made from premium quality HSS.
- 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Machine reamers have a morse taper shank that enables a constant cutting force to be applied by the machine, and cutting starts immediately.
- Machine reamers have only a slight lead in to start.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MTS Machine
BORDO MTS Machine Metric
- Bordo Morse Taper Shank Machine Reamers are made from premium quality HSS.
- 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Machine reamers have a morse taper shank that enables a constant cutting force to be applied by the machine, and cutting starts immediately.
- Machine reamers have only a slight lead in to start.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page