Cutting, Drilling & Abrasives
Showing 1225–1260 of 1333 results
-
BurrsSABER Burrs Non-Ferrous Cut Ball
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical with Ball Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Included Angle
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Tree Radius Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Diamond Hole Saw
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- Core drills can be used on most non-ferrous hard materials such as glass, ceramic, porcelain, fibreglass, slate, marble, granite and other natural and manufactured stone materials.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren’t “drilling” a hole – they are “grinding” a hole.
- SPEEDS IN RPM: Fibreglass – 1200, Glass, Ceramic and China – 800, Limestone and Marble – 600, Ceramic Tile – 600, Porcelain – 500, Granite and Comp. Stone – 400.
- DO NOT USE HAMMER ACTION.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Drill & Tap Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Hole Saw Kits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Quick Change Mandrel
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Tap & Die Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Specialty Tools, Workshop & LightingSP TOOLS Nut Splitter Set 4pc
- Set Includes: 9-12mm, 12-16mm, 16-22mm & 22-27mm
- Splitting of seized bolts and/or over tightened bolts without damaging the thread
- Chrome molybdenum steel blades with forged high carbon steel grips
- Hardened, tempered & chrome plated for rust resistance
(0 reviews) -
Specialty Tools, Workshop & LightingSP TOOLS Screw Extractor Set 25pc
- For extracting broken screws, studs & bolts: 5mm to 16mm
- Threads designed to remove broken fasteners without breaking or jamming
- Fluted type extractors that provide a solid grip on broken studs and screws
- Housed in heavy duty storage case and EVA foam tray
SET INCLUDES:
- 5x Drill Bits: 1/8”, 3/16”, 1/4“, 5/16”, 11/32”
- 5x Extractor Pins Sized to Match Drill Bits
- 5x Hex Extracting Drivers to Match Extractor Pins
- 10x Stud Drilling Guides: 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32 & 9/16”
(0 reviews) -
Threaded Inserts & RestorationTAPSERT Bulk Metric Coarse
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Threaded Inserts & RestorationTAPSERT Bulk Spark Plug
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Threaded Inserts & Restoration
TAPSERT Bulk UNC
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Threaded Inserts & Restoration
TAPSERT Bulk UNF
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
InsertsTAPSERT Kit Metric Coarse
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Threaded Inserts & Restoration
TAPSERT Kit Spark Plug
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Threaded Inserts & Restoration
TAPSERT Kit UNC
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Threaded Inserts & Restoration
TAPSERT Kit UNF
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting WheelsTOLEDO Mill Saw Tapered Files
- Rectangular files with single cut on all four sides
- Suitable for use as both engineering and sharpening files
- The ideal solution for applications where a smooth finish is important
- Can also be used for polishing and deburring work on lathes
- Available individually with a handle or bulk packs with no handles
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Straight BitsTRUACUT 1/2″ Shank Straight Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Straight Bits
TRUACUT 1/4″ Shank Straight Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
Router BitsTRUACUT Arbors
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Router BitsTRUACUT Bead / Low “S” / Plinth Face Mould Bit
27mm Bead / Low S / Plinth Face Mould
(0 reviews) -
Router BitsTRUACUT Bead / Shallow Surface Concave Bit
25.4mm Bead / Shallow Surface Concave
(0 reviews) -
Router BitsTRUACUT Bead and Flute Bit
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Router BitsTRUACUT Beading Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Router BitsTRUACUT Beading Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Router BitsTRUACUT Bearings
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Router BitsTRUACUT Bevel Trim 30° Bit
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Router BitsTRUACUT Biscuit Cutting Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Router BitsTRUACUT Bull Nose Radius Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Router BitsTRUACUT Chamfering 45° Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Router BitsTRUACUT Classical Bits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
