Cutting, Drilling & Abrasives
Showing 433–468 of 948 results
-
Drill Bits/SetsBORDO SDS Plus Deltabit 316mm
- The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications.
- Deltabits offer specific advantages over standard SDS masonry bits.
- Three edge cutter provides high durability and improved drilling speed.
- Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
- Eliminates rifling – drilling holes close to perfect roundness.
- Extremely round holes result in improved fastener performance by increasing pull out loads.
- More accurate hole starting without bit walk.
- Limited circumferential wear.
- Drills through reinforcing mesh and reinforcing bar.
- Minimised bit binding against reinforcing bar – increasing operator safety.
- Easily drills through all typical steel decking plate including Bondek®.
- Reduced vibration minimising operator fatigue.
- Extremely hard wearing for long tool life.
- Triple fluted for improved dust extraction.
- Asymmetrical five cutter head on a select range of sizes in SDS Max.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/Sets
BORDO SDS Plus Deltabit 466mm
- The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications.
- Deltabits offer specific advantages over standard SDS masonry bits.
- Three edge cutter provides high durability and improved drilling speed.
- Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
- Eliminates rifling – drilling holes close to perfect roundness.
- Extremely round holes result in improved fastener performance by increasing pull out loads.
- More accurate hole starting without bit walk.
- Limited circumferential wear.
- Drills through reinforcing mesh and reinforcing bar.
- Minimised bit binding against reinforcing bar – increasing operator safety.
- Easily drills through all typical steel decking plate including Bondek®.
- Reduced vibration minimising operator fatigue.
- Extremely hard wearing for long tool life.
- Triple fluted for improved dust extraction.
- Asymmetrical five cutter head on a select range of sizes in SDS Max.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO SDS Plus Deltabit Set
- 5 Pce 5-10mm SDS+ Deltabit Set
- SDS Plus DELTABIT 5 piece set OAL 166mm
- The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications.
- Deltabits offer specific advantages over standard SDS masonry bits.
- Three edge cutter provides high durability and improved drilling speed.
- Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
- Eliminates rifling – drilling holes close to perfect roundness.
- Extremely round holes result in improved fastener performance by increasing pull out loads.
- More accurate hole starting without bit walk.
- Limited circumferential wear.
- Drills through reinforcing mesh and reinforcing bar.
- Minimised bit binding against reinforcing bar – increasing operator safety.
- Easily drills through all typical steel decking plate including Bondek®.
- Reduced vibration minimising operator fatigue.
- Extremely hard wearing for long tool life.
- Triple fluted for improved dust extraction.
- Asymmetrical five cutter head on a select range of sizes in SDS Max.
(0 reviews) -
Drill Bits/SetsBORDO SDS Plus Extractor Adaptor
- SDS Plus Vacuum Masonry Drill Dust Extractor Adaptor
- Bordo SDS Vacuum Masonry Drill Bits reduce airborne silica dust by extracting it at the point of drilling.
- Holes at the bit tip and the hollow shaft design allow dust extraction through the bit while drilling drilling the hole.
- The drilling of “clean” holes greatly increases productivity for chemical anchor preparation by removing the need for the “blow-brush-blow” method used with standard masonry drills.
- The universal vacuum adapter fits most common dust extractor attachments.
(0 reviews) -
Drill Bits/SetsBORDO SDS Plus Rebar Cutters
- Drills through concrete embedded rebar.
- Tungsten Carbide Tipped – Rotary Only – Rebar Cutters.
- At last, the answer to drilling through concrete-embedded rebar! No more broken or shattered hammer bits; now you can drill through the rebar and not have to relocate the hole to avoid the rebar!
- WARNING Tungsten carbide tipped rotary rebar cutters are designed for use in a standard SDS+ hammer drill provided the selector mechanism is kept in the rotary-only position.
- WARNING Rebar cutters are intended for rotary drilling only; percussion (hammering action) will damage the tool.
- SAFETY NOTE Follow power tool manufacturersÂ’ recommendations for bit capacity.
- SAFETY NOTE The operator of this tool assumes sole responsibility for any adverse structural effects of cutting rebar. Consult structural engineers if you have any concerns.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO SDS Plus Set
- 5 – 10mm 5 Pce SDS+ Set
- Bordo SDS Plus masonry bits provide high performance drilling in hard masonry materials.
- Suitable for use in all rotary hammer drills fitted with an SDS Plus chuck.
- Suitable for use in Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
(0 reviews) -
Drill Bits/SetsBORDO SDS Plus Vacuum Masonry Drill
- Bordo SDS Vacuum Masonry Drill Bits reduce airborne silica dust by extracting it at the point of drilling.
- Holes at the bit tip and the hollow shaft design allow dust extraction through the bit while drilling drilling the hole.
- The drilling of “clean” holes greatly increases productivity for chemical anchor preparation by removing the need for the “blow-brush-blow” method used with standard masonry drills.
- The universal vacuum adapter fits most common dust extractor attachments.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO SDS Plus X-BIT 110mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/Sets
BORDO SDS Plus X-BIT 160mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/Sets
BORDO SDS Plus X-BIT 210mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/Sets
BORDO SDS Plus X-BIT 260mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/Sets
BORDO SDS Plus X-BIT 310mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/Sets
BORDO SDS Plus X-BIT 450mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/Sets
BORDO SDS Plus X-BIT 600mm
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO SDS Plus X-Bit Masonry Drill Set
- Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
- Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
- The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
- The precision cutting facets create dimensionally accurate holes for improved anchor performance.
- Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
- Hole positioning is simplified with the self-centering drill tip reducing bit wander.
- Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
- Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
- * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.
(0 reviews) -
Drill Bits/SetsBORDO Self Feeding Wood Bit
- Self Feeding Wood Bit.
- The Bordo range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications.
- 7/16″ hex shanks to suit drills with 1/2″ (or larger) chuck.
- Precision milled shank which eliminates wobble and runout.
- Spurs on the outside diameter cut holes cleanly and accurately.
- Dual inside cutting planes shave hole radius for clean, smooth holes without pressure.
- Forged in one piece from high carbon steel for maximum strength under the toughest drilling conditions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO Self Feeding Wood Bit Grub Screw
- Self Feeding Wood Bit Grub Screw.
- The Bordo range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications.
- 7/16″ hex shanks to suit drills with 1/2″ (or larger) chuck.
- Precision milled shank which eliminates wobble and runout.
- Spurs on the outside diameter cut holes cleanly and accurately.
- Dual inside cutting planes shave hole radius for clean, smooth holes without pressure.
- Fored in one piece from high carbon steel for maximum strength under the toughest drilling conditions.
(0 reviews) -
Drill Bits/SetsBORDO Self Feeding Wood Bit Replaceable Screw Tip
- The Bordo range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications.
- 7/16″ hex shanks to suit drills with 1/2″ (or larger) chuck.
- Precision milled shank which eliminates wobble and runout.
- Spurs on the outside diameter cut holes cleanly and accurately.
- Dual inside cutting planes shave hole radius for clean, smooth holes without pressure.
- Fored in one piece from high carbon steel for maximum strength under the toughest drilling conditions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO Self Feeding Wood Bit Set
- 25-57mm 9 Pce Self Feeding Wood Bit Set
- Self Feeding Wood Bit Set.
- The Bordo range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications.
- 7/16″ hex shanks to suit drills with 1/2″ (or larger) chuck.
- Precision milled shank which eliminates wobble and runout.
- Spurs on the outside diameter cut holes cleanly and accurately.
- Dual inside cutting planes shave hole radius for clean, smooth holes without pressure.
- Fored in one piece from high carbon steel for maximum strength under the toughest drilling conditions.
(0 reviews) -
Drill Bits/SetsBORDO Ship Auger Bits 190mm
- Ship Auger.
- Bordo Ship Augers are single twist bits, easily recognised by their lack of a central core.
- The ship head features a single cutter with a coarse screw.
- Their open pattern allows for the efficient evacuation of shavings and makes them ideal for deep hole applications.
- The absence of cutting spurs (or lips) makes them less susceptible to deviation due to grain and imperfections making them the preferred option for timber with a strong grain.
- Hardened cutting edge for long life in hard timber, including nail-embedded wood.
- Ideal for deep hole applications.
- Fully-forged bit for maximum durability.
- Resharpenable.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/Sets
BORDO Ship Auger Bits 470mm
- Ship Auger.
- Bordo Ship Augers are single twist bits, easily recognised by their lack of a central core.
- The ship head features a single cutter with a coarse screw.
- Their open pattern allows for the efficient evacuation of shavings and makes them ideal for deep hole applications.
- The absence of cutting spurs (or lips) makes them less susceptible to deviation due to grain and imperfections making them the preferred option for timber with a strong grain.
- Hardened cutting edge for long life in hard timber, including nail-embedded wood.
- Ideal for deep hole applications.
- Fully-forged bit for maximum durability.
- Resharpenable.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO Single Flute Endmill
- Solid tungsten carbide.
- Large single flute facilitates rapid swarf clearance.
- Use for machining Aluminium and Magnesium wrought alloys – heat treatable and non heat treatable.
- Use for machining Aluminium and Magnesium cast alloys – heat treatable and non heat treatable.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Slot Drills Ball Nose Fractional Long – Threaded
- HSS-Co8 (Cobalt) centre cutting, long threaded, ball nose
- Sometimes referred to as ball cutters, or ball nose end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling soft steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling Cutters
BORDO Slot Drills Ball Nose Fractional Short – Threaded
- HSS-Co8 (Cobalt) centre cutting, short threaded, ball nose
- Sometimes referred to as ball cutters, or ball nose end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling soft steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Slot Drills Ball Nose Metric Long – Plain Flatted
- HSS-Co8 (Cobalt) centre cutting, long flatted, ball nose
- Sometimes referred to as ball cutters, or ball nose end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling soft steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling Cutters
BORDO Slot Drills Ball Nose Metric Long – Threaded
- HSS-Co8 (Cobalt) centre cutting, long threaded, ball nose
- Sometimes referred to as ball cutters, or ball nose end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling soft steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling Cutters
BORDO Slot Drills Ball Nose Metric Short – Plain Flatted
- HSS-Co8 (Cobalt) centre cutting, short flatted, ball nose
- Sometimes referred to as ball cutters, or ball nose end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling soft steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling Cutters
BORDO Slot Drills Ball Nose Metric Short – Threaded
- HSS-Co8 (Cobalt) centre cutting, short threaded, ball nose
- Sometimes referred to as ball cutters, or ball nose end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling soft steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Slot Drills Fractional Long – Threaded
- HSS-Co8 (Cobalt) centre cutting, long threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Slot Drills Fractional Short – Threaded
- HSS-Co8 (Cobalt) centre cutting, short threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Slot Drills Fractional Short – Threaded 6 Piece Set
- 6 Piece Fractional Short Threaded Slot Drill Set
- HSS-Co8 (Cobalt) centre cutting, short threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews) -
Slot DrillsBORDO Slot Drills Metric Long – Plain Flatted
- HSS-Co8 (Cobalt) centre cutting, long flatted, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Slot DrillsBORDO Slot Drills Metric Long – Threaded
- HSS-Co8 (Cobalt) centre cutting, long threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Slot Drills
BORDO Slot Drills Metric Short – Plain Flatted
- HSS-Co8 (Cobalt) centre cutting, short flatted, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Slot DrillsBORDO Slot Drills Metric Short – Plain Flatted 6 Piece Set
- 6 Piece Metric Short Flatted Slot Drill Set
- HSS-Co8 (Cobalt) centre cutting, short flatted, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews) -
Slot Drills
BORDO Slot Drills Metric Short – Threaded
- HSS-Co8 (Cobalt) centre cutting, short threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page