Drilling
Showing 181–216 of 784 results
-
JobberBORDO LEFT HAND Cobalt HSS-Co5
- Bordo Fractional Left Hand Cobalt Tough HSS-Co5 Twist Drills.
- 135° Split Point (crankshaft point)
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Left Hand Twist drills are ideal for use with screw extractors to remove broken bolts and screws.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
JobberBORDO LEFT HAND Cobalt HSS-Co5 Set
- HSS-Co5 (Cobalt) Left Hand Twist Drill Set
- Bordo Fractional Left Hand Cobalt Tough HSS-Co5 Twist Drills.
- 135° Split Point (crankshaft point)
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Left Hand Twist drills are ideal for use with screw extractors to remove broken bolts and screws.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews) -
Long Reach (Aircraft) HSSBORDO Long Reach (Aircraft) HSS Fractional
- Long Reach (Aircraft) Drill
- Long Reach Drills are suitable for all general purpose drilling where extra reach is required.
- Long Reach Drills are not designed to drill deep holes.
- Maximum hole depth must be less than the flute length (FL) of the drill.
- Deep hole drilling requires the use of a Bordo Long Series Drill, Bordo Extra Deep Hole Drill or Bordo Auger Bit depending on the material being drilled.
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Black Finish Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding.
- The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Long Series HSSBORDO Long Series Black HSS Fractional
- ANSI B94-11
- 118° chisel point with 30° helix.
- Chisel point is suitable for general purpose drilling.
- Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Long Series HSS
BORDO Long Series Black HSS Metric
- ANSI B94-11
- 118° chisel point with 30° helix.
- Chisel point is suitable for general purpose drilling.
- Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Long Series HSSBORDO Long Series Bright HSS Fractional
- ANSI B94-11
- 118° split point with 30° helix.
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Long Series HSS
BORDO Long Series Bright HSS Metric
- ANSI B94-11
- 118° split point with 30° helix.
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BridgeBORDO MTS Bridge
- HSS Morse Taper Shank Tapered Spiral Flute Bridge Reamer
- Bridge reamers are used to create an aligned hole in a structural steel assembly. These reamers enlarge and align holes for rivets and bolts in structural steel members such as I-beams, angles, channels, and plates.
- The reamer is tapered for approximately half its FL allowing the reamer to enter out-of-line holes often encountered in structural work.
- All tools are constructed with left-hand spiral and right-hand cut.
- The left-hand spiral eliminates the tendency of the reamer to pull itself into the hole.
- In large structural assemblies, the holes are generally punched undersize and then reamed when in position.
- The idea is that the holes most likely will not line up within about 1/8″ when a fabricated 50 foot beam or column is finally put into place.
- Coolant or cutting tool lubricant should be utilitised when possible.
- Benefits include better finishes, superior tool life and the ability to increase speeds and feeds.
- Bridge reamers should be run at half the R.P.M. suggested for a corresponding twist drill size.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Morse Taper ShankBORDO MTS Extension Sockets
- Morse Taper Shank Extension Sockets are used to extend tool lengths and application distances.
- They are also designed to adapt morse taper shank tools to a larger, or smaller, morse taper holder.
- All Bordo MTS extension sockets are hardened and precision ground internally and externally.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MTS MachineBORDO MTS Machine Fractional
- Bordo Morse Taper Shank Machine Reamers are made from premium quality HSS.
- 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Machine reamers have a morse taper shank that enables a constant cutting force to be applied by the machine, and cutting starts immediately.
- Machine reamers have only a slight lead in to start.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MTS Machine
BORDO MTS Machine Metric
- Bordo Morse Taper Shank Machine Reamers are made from premium quality HSS.
- 10° left hand spiral for effective swarf removal.
- Right hand cutting.
- H7 hole limit (tolerance).
- Machine reamers have a morse taper shank that enables a constant cutting force to be applied by the machine, and cutting starts immediately.
- Machine reamers have only a slight lead in to start.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Morse Taper ShankBORDO MTS Sleeves
- MTS sleeve – 1 internal, 2 external
- The Bordo range of Morse Taper Shank Sleeves are precision ground inside and out and are also fully through hardened.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Multi Mills Metric Long – Threaded
- HSS-Co8 (Cobalt) end cutting, short threaded
- Multimills can cut in both axial and radial directions.
- They have exceptional chip evacuation and metal removal rates, while the flute design reduces vibration, even at high loads.
- The Multimill not only replaces two end mills to reduce tool-change and set-up times, but it also reduces the number of tools required in the machine set-up.
- Multimills are used in milling applications such as profile milling, tracer milling, face milling, and plunging.
- Can be used in much harder materials than slot drills.
- Three flutes deliver high metal removal rates as well as a high quality surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Multi Mills Metric Short – Threaded
- HSS-Co8 (Cobalt) end cutting, long threaded
- Multimills can cut in both axial and radial directions.
- They have exceptional chip evacuation and metal removal rates, while the flute design reduces vibration, even at high loads.
- The Multimill not only replaces two end mills to reduce tool-change and set-up times, but it also reduces the number of tools required in the machine set-up.
- Multimills are used in milling applications such as profile milling, tracer milling, face milling, and plunging.
- Can be used in much harder materials than slot drills.
- Three flutes deliver high metal removal rates as well as a high quality surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Multi-Size Tap & Drill Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Panel Drills HSSBORDO Panel Drills HSS Black Double Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Black Finish Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding.
- The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Panel Drills HSSBORDO Panel Drills HSS Black Single Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Black Finish Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
- This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding.
- The result is increased tool life.
- Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Panel Drills HSSBORDO Panel Drills HSS Bright Double Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Bright Finish Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Panel Drills HSSBORDO Panel Drills HSS Bright Single Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Bright Finish Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Power-Hex with 90° Countersink HSSBORDO Power-Hex with 90° Countersink HSS
- Power-Hex HSS 1/4″ hex shank twist drill with 4 flute 90° HSS countersink
- HSS 118° chisel point drill with 30° helix. Four flute 90° HSS countersink.
- Ideal for use with quick change adaptors and bit holders.
- Changing your drill bit is now as easy as swapping between any other 1/4″ hex shank accessory.
- Power-Hex drills are ideal for use with the extensive range of Bordo quick change adaptors, bit holders and quick change extensions.
- Power-Hex drills and countersinks are designed for use in timber and plastics – they are NOT designed for use in metal.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Mist DrillBORDO Pressure Water Bottle
- Pressure Water Bottle
- The Bordo Pressure Water Bottle is ideal for use with the Diamond Mist Drill system.
- It simply attaches to the Mist Drill Body to deliver a constant supply of water to the diamond cutter.
- It can also be used in conjunction with the Bordo Drilling Template (2715-DT) in a wide range of ceramic, porcelain and stone drilling applications.
(0 reviews) -
Quad MaxBORDO Quad Max Cutter Set
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Self Feeding Wood BitsBORDO Quick Change Extensions
- 1/4″ x 75mm Standard Magnetic Bit Holder – Clam
- The Bordo range of magnetic bit holders feature powerful magnets.
- Suitable for use with all 1/4″ 25mm insert bits.
(0 reviews) -
MasonryBORDO Rebar Cutter Extensions
- Drills through concrete embedded rebar.
- Tungsten Carbide Tipped – Rotary Only – Rebar Cutters.
- At last, the answer to drilling through concrete-embedded rebar! No more broken or shattered hammer bits; now you can drill through the rebar and not have to relocate the hole to avoid the rebar!
- WARNING Tungsten carbide tipped rotary rebar cutters are designed for use in a standard SDS+ hammer drill provided the selector mechanism is kept in the rotary-only position.
- WARNING Rebar cutters are intended for rotary drilling only; percussion (hammering action) will damage the tool.
- SAFETY NOTE Follow power tool manufacturersÂ’ recommendations for bit capacity.
- SAFETY NOTE The operator of this tool assumes sole responsibility for any adverse structural effects of cutting rebar. Consult structural engineers if you have any concerns.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Colour BandBORDO Red Band HSS-Co TiAlN Tough Treatable Steel Drilling
- Bordo Metric Red Band HSS-Co TiAlN Coated Twist Drills for Tough Treatable Steel.
- DIN338
- 130° UX point with two helical parabolic flutes with 33 degrees of helix angle.
- The mechanical properties of materials are influenced diversely by the addition of alloying elements and heat treatment processes, resulting in some high-strength, quenched and tempered steels or hardened steels.
- This range has its own unique set of machining requirements which are satisfied by the Red Band – Tough Treatable Steel – Series.
- TiAlN coating increases tool surface hardness to 87Rc.
- For machining materials with Hardness < 470 HB : Tensile Strength <1500 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Red Band TiAlN Coated Tough Treatable Steel Tapping Spiral Flute
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Red Band TiAlN Coated Tough Treatable Steel Tapping Spiral Point
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
DrillsBORDO Reduced Shank HSS 1/2″ Shank Metric
- Reduced shank HSS twist drill.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reduced Shank HSSBORDO Reduced Shank HSS 1/2″ Shank Fractional
- Reduced shank HSS twist drill.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reduced Shank HSSBORDO Reduced Shank HSS 1/2″ Shank Fractional Set
- Reduced shank HSS twist drill set.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
DrillsBORDO Reduced Shank HSS 1/2″ Shank Metric Set
- Reduced shank HSS twist drill set.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reduced Shank HSS
BORDO Reduced Shank HSS 3/8″ Shank Fractional
- Reduced shank HSS twist drill.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reduced Shank HSSBORDO Reduced Shank HSS 3/8″ Shank Metric
- Reduced shank HSS twist drill.
- 118° notched point with 30° helix.
- Notched point is a variation on the standard chisel point, providing faster starting and reduced drill wander.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bordo reduced shank HSS drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating.
- This surface aids chip flow and heat dissipation.
- The drill is then ground a second time to achieve a bright finish on the shank and cutting edges.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Scotch Pattern Auger BitsBORDO Scotch Pattern Auger Bit 305mm
- Scotch Pattern Auger Bit High Carbon Steel.
- Heavy duty two flute auger bits are extremely efficient cutting – perfect for Australian soft and hard woods.
- Wide flutes provide rapid chip evacuation with a heavy duty worm point that resists breakage.
- Unlikely to deviate due to grain or imperfections in the timber (such as knots).
- Heavy duty milled flute design.
- Hardened cutting edge for long life in hard timber.
- Fully-forged bit for maximum durability.
- Resharpenable.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Scotch Pattern Auger Bits
BORDO Scotch Pattern Auger Bit 610mm
- Long Scotch Pattern Auger Bit High Carbon Steel.
- Heavy duty two flute auger bits are extremely efficient cutting – perfect for Australian soft and hard woods.
- Wide flutes provide rapid chip evacuation with a heavy duty worm point that resists breakage.
- Unlikely to deviate due to grain or imperfections in the timber (such as knots).
- Heavy duty milled flute design.
- Hardened cutting edge for long life in hard timber.
- Fully-forged bit for maximum durability.
- Resharpenable.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ExtractorsBORDO Screw Extractor Set
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page