Cutting
Showing 37–72 of 434 results
-
Diamond Saw BladesBORDO Diamond Saw Blades Super Turbo
- Enduro Diamond Super Turbo Fast Cut General Purpose
- Turbo blades typically have soft to medium bonds for a variety of general purpose to specific cutting applications.
- Turbo blades feature a continuous rim with an edge that is serrated.
- This serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO Diamond Saw Blades Tradecut Diamond Continuous Rim
- Tradecut Diamond Saw Continuous Rim
- Continuous rim blades have softer bonds for cutting hard materials such as tile, porcelain, granite, stone, glass, and other materials that can chip easily.
- These blades don’t have individual segments but instead have a solid, continuous rim or edge.
- Most continuous rim blades are designed for wet cutting applications, providing the smoothest, chip free cuts.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO Diamond Saw Blades Tradecut Diamond Segmented Rim
- Tradecut Diamond Segmented Rim
- High diamond count for long blade life.
- Segmented rim for clean, fast cuts both wet and dry.
- Free cutting with reduced vibration.
- Efficient slurry evacuation.
- Use to cut cured concrete, reinforced concrete, clay bricks, Hebel®, terracotta tiles, slate, granite, bluestone, fibreglass, reinforced plastics, wall chasing in brick and concrete.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO Diamond Saw Blades Tradecut Diamond Turbo
- Tradecut Diamond Saw Turbo Rim
- Turbo blades typically have soft to medium bonds for a variety of general purpose to specific cutting applications.
- Turbo blades feature a continuous rim with an edge that is serrated.
- This serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades Ultra Thin
- Ultra thin turbo rim general purpose
- Ultra thin 1.2mm kerf removes less material for super fast cutting and reduced wastage.
- The serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
- Extreme concentration of diamond for fast, clean cutting and long blade life.
- 8mm segment height provides the benefits of fast cutting with maximum control for superior cut accuracy.
- Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
- Ideal for use in tile saws and angle grinders.
- Fast cutting with reduced chipping.
- Use when cutting porcelain, ceramic tiles, vitrified tiles, glazed tiles, terracotta, granite, marble, slate, limestone and sandstone.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO Drilling Template with Suction
- Drilling Template with Suction
- Drilling Template 4-83mm
- The Bordo heavy duty drilling template fixes securely to any smooth surface with a simple lever actuated suction function.
- The 2715-HT template is suitable for use with hole saws and drills from 4 to 83mm.
(0 reviews) -
Hole Saws & KitsBORDO Hole Enlarger
- Hole Enlarger
- Enlarge any hole with ease.
- Re-cut your hole using a new size hole saw.
- Any hole between 52mm and 92mm can be enlarged.
- Suits all standard hole saws.
(0 reviews) -
Hole Saws & KitsBORDO HSS Cobalt Bi-Metal Hole Saw
- Bordo bi-metal hole saws are premium quality, general purpose saws suitable for a wide variety of materials and applications.
- The high-speed steel cobalt (HSS-Co) cutting edge provides shock resistant teeth and resists tooth strippage.
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration.
- 48mm (1-7/8″) depth of cut.
- 5mm (3/16″) thick heavy-duty backing plate eliminates need for drive plate.
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas.
- Ideal for plumbing, construction, aircraft, electrical, maintenance, and automotive applications.
- Use in steel, aluminium, brass, cast iron, plastic, wood and a wide variety of other materials.
- Can be used in stainless steel with use of a cutting lubricant, reduced spindle speed and sufficient feed pressure to produce chips.
- Repetition hole cutting in stainless steel is best suited to Bordo XP and XP2 hole saws.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO HSS Cobalt Bi-Metal Hole Saw Kits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO HSS Cobalt Bi-Metal Mandrels
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
T-Shank Tungsten Carbide GritEdgeBORDO Jig Saw Blade T-Shank Tungsten Carbide GritEdge
- 75mm Straight Cut Carbide GritEdge Jigsaw Blade 2Pk
- Jig Saw TCG T-Shank Straight Cut 75mm Ceramic/Fibre – 2 Pack
- Abrasive 1.0 to 15.0mm.
- Precise, straight cuts in ceramics, glass, fibre cement sheet and fibreglass reinforced synthetics.
(0 reviews) -
Assortment PacksBORDO Jig Saw Blades Assortment Packs
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
T-Shank MetalBORDO Jig Saw Blades T Shank Metal
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
T-Shank MetalBORDO Jig Saw Blades T Shank Timber
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Universal Shank MetalBORDO Jig Saw Blades Universal Shank Metal
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Universal Shank TimberBORDO Jig Saw Blades Universal Shank Timber
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutters & SetsBORDO MTS Adaptors for Annular Cutter
- Bordo hardened steel MTS Annular Cutter Adaptors allow the use of annular cutters in drill presses or lathes fitted with an MTS chuck.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutters & SetsBORDO Rail Cutter TCT Metric 25mm
- Precision ground teeth ensure fast, accurate, burr free holes without the need for pre drilling.
- Heavy duty tungsten carbide annular cutters achieve a longer tool life and the ability to cut harder materials than HSS cutters.
- Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting.
- Ideal for use in stainless steel and high tensile steels.
- Flutes run the full length of the hardened steel body provide excellent chip removal.
- Reduced tooth load.
- Minimized tool wear.
- Extended tool life.
- Close tolerance drilling without runout.
- Reamed quality, burr free finished holes.
- Bordo Annular Cutters feature a 3/4″ universal shank that suits most standard machines including Hougen, Slugger, Rotabroach, Rotabest and Nitto.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reciprocating Saw Blade SetBORDO Reciprocating Saw Blade Set
- Reciprocating Saw Blade Assortment with heavy duty ballistic nylon pouch
- Xtreme reciprocating Saw Blade Assortment includes 2 x “Fire Rescue & Extrication”, 2 x “Wrecking and Demolition” and 3 metal cutting blades.
- 14 TPI Fire, Rescue & Extrication Saw Blades.
- For cutting pipe, angle iron, nail embedded wood and structural steel.
- 6 TPI Wrecking & Demolition Saw Blades.
- For cutting wood, sleepers and other tough materials.
- 18 and 24 TPI Bi-Metal Blades.
- For cutting thin and medium sheetmetal and tube.
(0 reviews) -
Hole Saws & KitsBORDO Ripper Tungsten Carbide Tipped Hole Saw
- Ripper Heavy Duty Tungsten Carbide Tipped Hole Saws
- Heavy duty abrasion resistant tungsten carbide teeth will cut materials that quickly dull normal hole saws.
- Heavy duty construction for long life with large gullets for easy slug removal.
- Ideal for cutting timber and all types of composite board, particularly MDF.
- Ripper hole saws are also suitable for cutting wood laminates, plywood, insulation and fibre cement sheet.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO Ripper Tungsten Carbide Tipped Hole Saw Kits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO TCT Circular Saw Blades Alucut
- Alucut Blade for Aluminium Cutting – Non-Ferrous Metals, including Copper & Brass, Plastic, and Timber
- Fast clean cuts in aluminium and non-ferrous metals including copper, brass, plastic and timber.
- Triple chip tungsten carbide teeth for high performance smooth cutting.
- Heavy duty thick steel plate hardened and tempered to ensure accurate cuts.
- Smooth and fast cutting with solid stock in stationary and semi-stationary saws.
- Negative rake angle eliminates self-feeding and reduces blade grab.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO TCT Circular Saw Blades Circular Blade Accessories
- Circular saw blades reducing bushes
- Contains 8 sizes of reducing bushes: 30mm-1″, 30mm-25mm, 30mm-16mm, 25mm-22.2mm, 25mm-20mm, 25mm-16mm, 20mm-16mm, 20mm-10mm
(0 reviews) -
Circular Saw BladesBORDO TCT Circular Saw Blades Multicut
- Multicut Blade for Timber, Steel, Aluminium – Ferrous & Non-Ferrous Metals, Plastic, Timber, Plaster & Fibreglass
- Fast clean cuts in timber, ferrous and non-ferrous metals, plastic, plaster and fibreglass.
- Titanium carbide metal cutting teeth provide long blade life in the most demanding applications.
- Heavy duty anti-kick back tooth shoulders provide optimum support to the cutting tips ensuring maximum performance, extended blade life and safer cutting.
- Cool cutting with no heat, no burrs or dust and minimal sparks when cutting metal.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO TCT Circular Saw Blades Opticut
- Opticut Precision Thin Kerf Blade for Timber – All Types
- Optimum cutting thin kerf timber blades in 254mm and 305mm.
- Thin kerf for fast, effortless cuts with reduced stock wastage.
- High performance tooth geometries produce crisp, smooth cuts both with and across the grain, low feed resistance.
- Tru-plate fully hardened and tempered steel body is precision balanced to run truer.
- Ultra k-10 high density, high performance diamond ground carbide teeth for extreme durability and cutting life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO TCT Circular Saw Blades Rapidcut
- Rapidcut Thin Kerf Blade for Timber – All Types
- High performance, ultra thin kerf timber blades from 140mm to 305mm.
- Nano-shield coating reduces friction for reducing saw load, resists gumming keeping blade cooler and extending blade life, protects blade from corrosion.
- Tru-plate fully hardened and tempered steel body is precision balanced to run truer.
- Ultra k-10 high density, high performance diamond ground carbide teeth for extreme durability and cutting life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO TCT Circular Saw Blades Tradecut
- High performance, tungsten carbide tipped timber blades from 160mm to 305mm.
- Heavy duty anti-kickback tooth shoulders provide optimum support to the cutting tips ensuring maximum performance, extended blade life and safer cutting.
- Fully hardened and tempered steel body resists warping even in the most demanding applications.
- High performance diamond ground carbide teeth for improved cutting efficiency
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO TCT Circular Saw Blades Tradecut Concrete Formwork
- 235mm x 20T Tradecut Concrete Formwork Blade
- High performance, tungsten carbide tipped timber blades from 160mm to 305mm.
- Heavy duty anti-kickback tooth shoulders provide optimum support to the cutting tips ensuring maximum performance, extended blade life and safer cutting.
- Fully hardened and tempered steel body resists warping even in the most demanding applications.
- High performance diamond ground carbide teeth for improved cutting efficiency.
- Designed for optimum performance and long blade life when cutting engineered woods such as hardwood ply and form ply.
(0 reviews) -
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP
- XP TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick.
- XP2 TCT hole saws feature 3 edged cutters which balance the cutting effort for smoother boring, greater control and reduced drag. The deep body makes them ideal for use with curved surfaces such as metal pipes.
- Non-uniform separation of the tungsten carbide teeth and integrated mandrel virtually eliminates vibration due to resonance.
- Extremely long service life.
- No need for messy cutting fluids.
- Heavy duty plug ejector spring.
- Repetition cutting of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP Ejector Springs
- XP TCT Hole Saw Spring
- XP TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick.
- XP2 TCT hole saws feature 3 edged cutters which balance the cutting effort for smoother boring, greater control and reduced drag. The deep body makes them ideal for use with curved surfaces such as metal pipes.
- Non-uniform separation of the tungsten carbide teeth and integrated mandrel virtually eliminates vibration due to resonance.
- Extremely long service life.
- No need for messy cutting fluids.
- Heavy duty plug ejector spring.
- Repetition cutting of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials.
(0 reviews) -
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP Pilot Drill
- XP TCT Sheet Metal Cutter Pilot Drill
- Pilot Drill – 6mm x 47mm to suit XP Tungsten Carbide Hole Cutters
(0 reviews) -
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP Sets
- 16-40mm 9 Pce XP TCT Hole Saw Set
- XP Cutter Set 16,20,25,32,40mm
- XP TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick.
- Extremely long service life.
- No need for messy cutting fluids.
- Heavy duty plug ejector spring.
- Repetition cutting of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials.
(0 reviews) -
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP2 Deep Cut
- XP TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick.
- XP2 TCT hole saws feature 3 edged cutters which balance the cutting effort for smoother boring, greater control and reduced drag. The deep body makes them ideal for use with curved surfaces such as metal pipes.
- Non-uniform separation of the tungsten carbide teeth and integrated mandrel virtually eliminates vibration due to resonance.
- Extremely long service life.
- No need for messy cutting fluids.
- Heavy duty plug ejector spring.
- Repetition cutting of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP2 Deep Cut Ejector Springs
- XP2 Deep Cut TCT Hole Saw Spring
- XP TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick.
- XP2 TCT hole saws feature 3 edged cutters which balance the cutting effort for smoother boring, greater control and reduced drag. The deep body makes them ideal for use with curved surfaces such as metal pipes.
- Non-uniform separation of the tungsten carbide teeth and integrated mandrel virtually eliminates vibration due to resonance.
- Extremely long service life.
- No need for messy cutting fluids.
- Heavy duty plug ejector spring.
- Repetition cutting of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials.
(0 reviews) -
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP2 Deep Cut Pilot Drills
- XP2 TCT Sheet Metal Cutter Pilot Drill
- Pilot Drill – 6mm x 47mm to suit XP2 Tungsten Carbide Hole Cutters
(0 reviews) -
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP2 Deep Cut Sets
- 16-40mm 9 Pce XP2 TCT Deep Cut Hole Saw Set
- XP2 Sheet metal cutter set 16, 20, 25, 32, 40
- This kit features 5 x 1-piece XP2 Carbide Cutters in a tough case.
- TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick.
- They feature 3 edged cutters which balance the cutting effort for smoother boring, greater control and reduced drag.
- The deep body makes them ideal for use with curved surfaces such as metal pipes.
- Non-uniform separation of the tungsten carbide teeth and integrated mandrel virtually eliminates vibration due to resonance.
- Extremely long service life.
- No need for messy cutting fluids.
- Heavy duty plug ejector spring.
- Ideal for repetition cutting of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials.
(0 reviews)
