Hole Saws & Kits
Showing 37–72 of 118 results
-
Hole Saws & KitsDYMAXION Diamond Core Bits Multi-Material inc. Concrete
- Suitable for cutting concrete, brick, compressed fibre cement sheet, granite and other masonry building materials.
- Utilising adaptor AUB100 these core drills can be used with core drilling machines.
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren’t “drilling” a hole – they are “grinding” a hole.
- DO NOT USE HAMMER ACTION.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION Diamond Hole Enlarger
- Use to enlarge an existing hole.
- Ideal for use in porcelain and stone – can also be used in most common building materials.
- Insert in drill and slowly guide the drill in an anti-clockwise direction around the hole to be enlarged.
- Use firm pressure against the surface to be removed.
- Can also be used to grind rebates and irregular shapes.
Diameter (mm): 35 Segment Height (mm): 25 Shank (mm): 10mm Hex Ideal For: Enlarging holes in porcelain and stone. (0 reviews) -
Hole Saws & KitsDYMAXION Diamond Turbo Core Bits for Brick – Dry Cutting 160mm long
- Suitable for cutting concrete, brick, compressed fibre cement sheet, granite and other masonry building materials.
- Utilising adaptor AUB100 these core drills can be used with core drilling machines.
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren’t “drilling” a hole – they are “grinding” a hole.
- DO NOT USE HAMMER ACTION.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION Drill Guides and Vacuum Suction Collectors
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION Electroplated Diamond Hole Saws
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- Core drills can be used on most non-ferrous hard materials such as glass, ceramic, porcelain, fibreglass, slate, marble, granite and other natural and manufactured stone materials.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren’t “drilling” a hole – they are “grinding” a hole.
- SPEEDS IN RPM: Fibreglass – 1200, Glass, Ceramic and China – 800, Limestone and Marble – 600, Ceramic Tile – 600, Porcelain – 500, Granite and Comp. Stone – 400.
- DO NOT USE HAMMER ACTION.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsDYMAXION Replacement Carbon Steel Cutters for all Adjustable Hole Saws 2 per pack
- Replacement high carbon steel blade set.
- Suitable for cutting all types of sheetmetal including brass and aluminium.
- Maximum sheetmetal thickness 1mm.
(0 reviews) -
Hole Saws & KitsDYMAXION Replacement dust shield for AHS220K Clear Acrylic
- Replacement dust shroud for AHS220K
- Impact resistant shroud with non-marking seal.
(0 reviews) -
Hole Saws & Kits
DYMAXION Replacement dust shield for AHS300K Clear Acrylic
- Replacement dust shroud for AHS300K
- Impact resistant shroud with non-marking seal.
(0 reviews) -
Hole Saws & KitsDYMAXION Replacement Tungsten Carbide Cutters for all Adjustable Hole Saws 2 per pack
- Replacement tungsten carbide blade set.
- Suitable for cutting timber, veneer, plywood, composite board, plasterboard, fibre cement sheet and acrylic sheet.
- Maximum cutting depth in timber 50mm.
(0 reviews) -
Hole Saws & KitsDYMAXION Replacement Tungsten Carbide Tip Pilot Drill
- Replacement TCT pilot drill.
(0 reviews) -
Hole Saws & KitsDYMAXION TCT Hole Saws for Metal Deep Cut
- TCT hole saws are ideal for repetition cutting in ferrous and non-ferrous plate and tube (including stainless steel), FRP and synthetic resin plates up to 5mm thick.
- Ideal for single hole, and through cutting, in round and square tube.
- Maximum material thickness 5mm.
- Extremely long service life.
- No need for messy cutting fluids, however use of a cutting lubricant will increase cutter life.
- Heavy duty plug ejector spring.
- Stop collar prevents cutter from over drilling.
- Maximum drilling depth of 20mm.
- Maintain a constant drilling angle (do not “rock” the cutter) to avoid tooth damage.
- Avoid restarting the same hole cut with pressure on the drill – tooth damage may result.
- Use slower drilling speed with constant drill pressure for optimum performance and tool life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & Kits
DYMAXION TCT Hole Saws for Metal Standard Cut
- TCT hole saws are ideal for repetition cutting in steel plate and synthetic resin plates up to 5mm thick.
- Maximum material thickness 5mm.
- Extremely long service life.
- No need for messy cutting fluids, however use of a cutting lubricant will increase cutter life.
- Heavy duty plug ejector spring.
- Stop collar prevents cutter from over drilling.
- Maximum drilling depth of 5mm with ejector spring.
- Maximum drilling depth of 13mm without ejector spring.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsHSS Hole Saws for Sheet Metal
- M2 grade HSS construction for long tool life.
- Suitable for cutting ferrous and non-ferrous metal up to 3mm thick.
- Ideal for cutting holes in metal struts.
- Split point pilot drill for fast penetration and reduced drill wander.
- Pilot drill includes ejector spring for easy plug removal.
- Cut quickly and smoothly without burning.
- Not suitable for use in high tensile steel.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsHSS Hole Saws for Sheet Metal Set
- M2 grade HSS construction for long tool life.
- Suitable for cutting ferrous and non-ferrous metal up to 3mm thick.
- Ideal for cutting holes in metal struts.
- Split point pilot drill for fast penetration and reduced drill wander.
- Pilot drill includes ejector spring for easy plug removal.
- Cut quickly and smoothly without burning.
- Not suitable for use in high tensile steel.
(0 reviews) -
Hole Saws & KitsITM Holemaker 25mm Depth TCT Holesaws
WIDE RANGE OF APPLICATIONS.
Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.TRIPLE-CUT 3 EDGE CUTTING SYSTEM.
There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 3.2mm Depth Cordless TCT Holesaws
Tungsten Carbide Tipped Holesaws suitable for drilling steel, stainless steel, aluminium, FRP, PVC, plastics & fibreglass. The tungsten carbide tip maintains excellent durability due to the ideal blade angles. The cutting angle design uses the latest metal cutting technology. The escape angle discharges shavings quickly for smooth snag free cutting.
NON-UNIFORM DISTANCES BETWEEN TEETH.
Vibration is reduced by the non-uniform and varied distances between the teeth.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.CORDLESS TOOLS.
The 3.2mm depth of cut Holemaker holesaws are specially designed for use with cordlesss tools.
Ejector spring fitted as standard. Not for impact use.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 35mm Depth TCT Holesaws
WIDE RANGE OF APPLICATIONS.
Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.TRIPLE-CUT 3 EDGE CUTTING SYSTEM.
There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 4.5mm Depth TCT Holesaws
Tungsten Carbide Tipped Holesaws. Suitable for drilling steel, stainless steel, aluminium, FRP, PVC, plastics & fibreglass. The tungsten carbide tip maintains excellent durability due to the ideal blade angles. The cutting angle design uses the latest metal cutting technology. The escape angle discharges shavings quickly for smooth snag free cutting.
NON-UNIFORM DISTANCES BETWEEN TEETH.
Vibration is reduced by the non-uniform and varied distances between the teeth.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.Ejector spring fitted as standard. Not for impact use.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 50mm Depth TCT Holesaws
WIDE RANGE OF APPLICATIONS.
Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.TRIPLE-CUT 3 EDGE CUTTING SYSTEM.
There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.ONE PIECE BODY STRUCTURE.
With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR.
Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker 5pc TCT Holesaw Kit 25mm Depth
Features
EXCELLENT VALUE FOR MONEY
This new range of sets offer excellent value for money compared to similar product in the market. A high quality and high performance T.C.T. holesaw set can now be a cost viable option for all professional trades.PREMIUM BLOW MOULD CASE
The quality blow mould case provides tough storage for the product, while also presenting the product to a high standard when displayed in store.TUNGSTEN CARBIDE TEETH
Suitable for repetitive drilling of steel, stainless-steel, aluminium, plastics, fibreglass and other hard and abrasive materials.HIGH PERFORMANCE TEETH GEOMETRY
Vibration is reduced by the non-uniform and varied distances between the teeth.
The escape angle discharges shavings quickly for smooth snag free cutting.ONE-PIECE BODY STRUCTURE
With a one-piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR
Getting the holesaw stuck in the back of the material is prevented for safer, faster drilling.Not for impact use.
Specifications
5 Piece Set Includes:
1 x MCTR16 – 16mm x 25mm
1 x MCTR20 – 20mm x 25mm
1 x MCTR25 – 25mm x 25mm
1 x MCTR32 – 32mm x 25mm
1 x MCTR40 – 40mm x 25mm(0 reviews) -
Hole Saws & KitsITM Holemaker 5pc TCT Holesaw Kit 4.5mm Depth
Features
EXCELLENT VALUE FOR MONEY
This new range of sets offer excellent value for money compared to similar product in the market. A high quality and high performance T.C.T. holesaw set can now be a cost viable option for all professional trades.PREMIUM BLOW MOULD CASE
The quality blow mould case provides tough storage for the product, while also presenting the product to a high standard when displayed in store.TUNGSTEN CARBIDE TEETH
Suitable for repetitive drilling of steel, stainless-steel, aluminium, plastics, fibreglass and other hard and abrasive materials.HIGH PERFORMANCE TEETH GEOMETRY
Vibration is reduced by the non-uniform and varied distances between the teeth.
The escape angle discharges shavings quickly for smooth snag free cutting.ONE-PIECE BODY STRUCTURE
With a one-piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR
Getting the holesaw stuck in the back of the material is prevented for safer, faster drilling.Not for impact use.
Specifications
5 Piece Set Includes:
1 x MCS16 – 16mm x 4.5mm
1 x MCS20 – 20mm x 4.5mm
1 x MCS25 – 25mm x 4.5mm
1 x MCS32 – 32mm x 4.5mm
1 x MCS40 – 40mm x 4.5mm(0 reviews) -
Hole Saws & KitsITM Holemaker 6pc TCT Holesaw Kit 25mm Depth
Features
EXCELLENT VALUE FOR MONEY
This new range of sets offer excellent value for money compared to similar product in the market. A high quality and high performance T.C.T. holesaw set can now be a cost viable option for all professional trades.PREMIUM BLOW MOULD CASE
The quality blow mould case provides tough storage for the product, while also presenting the product to a high standard when displayed in store.TUNGSTEN CARBIDE TEETH
Suitable for repetitive drilling of steel, stainless-steel, aluminium, plastics, fibreglass and other hard and abrasive materials.HIGH PERFORMANCE TEETH GEOMETRY
Vibration is reduced by the non-uniform and varied distances between the teeth.
The escape angle discharges shavings quickly for smooth snag free cutting.ONE-PIECE BODY STRUCTURE
With a one-piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR
Getting the holesaw stuck in the back of the material is prevented for safer, faster drilling.Not for impact use.
Specifications
6 Piece Set Includes:
1 x MCTR16 – 16mm x 25mm
1 x MCTR20 – 20mm x 25mm
1 x MCTR25 – 25mm x 25mm
1 x MCTR32 – 32mm x 25mm
1 x MCTR40 – 40mm x 25mm
1 x MCTR50 – 50mm x 25mm(0 reviews) -
Hole Saws & KitsITM Holemaker 6pc TCT Holesaw Kit 4.5mm Depth
Features
EXCELLENT VALUE FOR MONEY
This new range of sets offer excellent value for money compared to similar product in the market. A high quality and high performance T.C.T. holesaw set can now be a cost viable option for all professional trades.PREMIUM BLOW MOULD CASE
The quality blow mould case provides tough storage for the product, while also presenting the product to a high standard when displayed in store.TUNGSTEN CARBIDE TEETH
Suitable for repetitive drilling of steel, stainless-steel, aluminium, plastics, fibreglass and other hard and abrasive materials.HIGH PERFORMANCE TEETH GEOMETRY
Vibration is reduced by the non-uniform and varied distances between the teeth.
The escape angle discharges shavings quickly for smooth snag free cutting.ONE-PIECE BODY STRUCTURE
With a one-piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.SAFE STOPPER COLLAR
Getting the holesaw stuck in the back of the material is prevented for safer, faster drilling.Not for impact use.
Specifications
6 Piece Set Includes:
1 x MCS16 – 16mm x 4.5mm
1 x MCS20 – 20mm x 4.5mm
1 x MCS25 – 25mm x 4.5mm
1 x MCS32 – 32mm x 4.5mm
1 x MCS40 – 40mm x 4.5mm
1 x MCS50 – 50mm x 4.5mm(0 reviews) -
Hole Saws & KitsITM Holemaker Arbor for Sheet Metal Cutter Suits 21-25mm Cutters
Holemaker Arbor to suit 21mm – 25mm, 13/16″ – 1″ Sheet Metal Cutters. 3/8-24 Thread Size.
Includes pilot pin, washers & hex key.(0 reviews) -
Hole Saws & KitsITM Holemaker Arbor for Sheet Metal Cutter Suits 8-20mm Cutters
Holemaker Arbor to suit 8mm – 20mm, 5/16″ – 3/4″ Sheet Metal Cutters. 3/8-24 Thread Size.
Includes pilot pin(0 reviews) -
-
Hole Saws & KitsITM Holemaker Cobalt Electricians Holesaw Set
Features
PREMIUM QUALITY BI-METAL M42 COBALT HIGH SPEED STEEL.
Suitable for drilling a wide range of materials including steel, aluminium, brass, cast iron, plastics & wood. The M42 (8% Cobalt) high speed steel teeth offer optimal cutting life & performance.VARIABLE PITCH 4 / 6 TEETH PER INCH.
For reduced vibration delivering increased life, performance & accuracy.Specifications
9 Piece Set Includes:
1 x UN100-016 – 16mm (5/8″)
1 x UN100-020 – 20mm
1 x UN100-025 – 25mm (1″)
1 x UN100-032 – 32mm (1-1/4″)
1 x UN100-040 – 40mm (1-9/16″)
1 x UN100-051 – 51mm (2″)
1 x UN100-125 – 11/32″ Arbor
1 x UN102-140 – 7/16″ Arbor
1 x UN102-145 – Arbor Thread Adaptor(0 reviews) -
Hole Saws & KitsITM Holemaker Cobalt General Engineering Holesaw Set
Features
PREMIUM QUALITY BI-METAL M42 COBALT HIGH SPEED STEEL.
Suitable for drilling a wide range of materials including steel, aluminium, brass, cast iron, plastics & wood. The M42 (8% Cobalt) high speed steel teeth offer optimal cutting life & performance.VARIABLE PITCH 4 / 6 TEETH PER INCH.
For reduced vibration delivering increased life, performance & accuracy.Specifications
16 Piece Set Includes:
1 x UN100-016 – 16mm (5/8″)
1 x UN100-019 – 19mm (3/4″)
1 x UN100-022 – 22mm (7/8″)
1 x UN100-025 – 25mm (1″)
1 x UN100-032 – 32mm (1-1/4″)
1 x UN100-035 – 35mm (1-3/8″)
1 x UN100-038 – 38mm (1-1/2″)
1 x UN100-044 – 44mm (1-3/4″)
1 x UN100-051 – 51mm (2″)
1 x UN100-057 – 57mm (2-1/4″)
1 x UN100-064 – 64mm (2-1/2″)
1 x UN100-076 – 76mm (3″)
1 x UN102-125 – 11/32″ Arbor
1 x UN102-140 – 7/16″ Arbor
1 x UN102-145 – Arbor Thread Adaptor
1 x UN102-100 – 12″ Extension Bar(0 reviews) -
Hole Saws & KitsITM Holemaker Cobalt Plumbers Holesaw Set
Features
PREMIUM QUALITY BI-METAL M42 COBALT HIGH SPEED STEEL.
Suitable for drilling a wide range of materials including steel, aluminium, brass, cast iron, plastics & wood. The M42 (8% Cobalt) high speed steel teeth offer optimal cutting life & performance.VARIABLE PITCH 4 / 6 TEETH PER INCH.
For reduced vibration delivering increased life, performance & accuracy.Specifications
16 Piece Set Includes:
1 x UN100-016 – 16mm (5/8″)
1 x UN100-019 – 19mm (3/4″)
1 x UN100-022 – 22mm (7/8″)
1 x UN100-025 – 25mm (1″)
1 x UN100-030 – 30mm (1-3/16″)
1 x UN100-035 – 35mm (1-3/8″)
1 x UN100-044 – 44mm (1-3/4″)
1 x UN100-051 – 51mm (2″)
1 x UN100-057 – 57mm (2-1/4″)
1 x UN100-073 – 73mm (2-7/8″)
1 x UN100-092 – 92mm (3-5/8″)
1 x UN100-114 – 114mm (4-1/2″)
1 x UN102-125 – 11/32″ Arbor
1 x UN102-140 – 7/16″ Arbor
1 x UN102-145 – Arbor Thread Adaptor
1 x UN102-100 – 12″ Extension Bar(0 reviews) -
Hole Saws & KitsITM Holemaker Holesaw Arbors
Arbor & Pilot Drill suit Holemaker UN100 Series Holesaws
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker Holesaw Pilot Drills
Arbor Pilot Drill suit Holemaker UN100 Series Holesaws
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker M42 Bi-Metal Holesaws
PREMIUM QUALITY BI-METAL M42 COBALT HIGH SPEED STEEL.
Suitable for drilling a wide range of materials including steel, aluminium, brass, cast iron, plastics & wood. The M42 (8% Cobalt) high speed steel teeth offer optimal cutting life & performance.VARIABLE PITCH 4 / 6 TEETH PER INCH.
For reduced vibration delivering increased life, performance & accuracy.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsITM Holemaker Pilot Pin for Sheet Metal Cutter Suits 21mm-25mm Cutters
Pilot Pin To Suit 21mm – 25mm, 13/16″ – 1″ Cutters
(0 reviews) -
Hole Saws & KitsITM Holemaker Pilot Pin for Sheet Metal Cutter Suits 8mm-20mm Cutters
Pilot Pin To Suit 8mm – 20mm, 5/16″ – 3/4″ Cutters
(0 reviews) -
Hole Saws & KitsITM Holemaker Pilot Pin Suit Mini Cutter in Adaptor
Pilot Pin, 3.95 X 68mm Suit Mini Cutter In Adaptor
(0 reviews) -
Hole Saws & KitsITM Holemaker Pilot to Suit Mini Cutter in Drill Arbor
Pilot Pin, 3.95 X 43mm Suit Mini Cutter In Drill Arbor
(0 reviews)