Lanyards

• Smooth rope guidance: controller with control lever enables smooth gliding and locks the position securely when released
• Versatile use: Can be used as a positioning device (EN 358), temporary anchorage device (EN 795-B) and temporary guide rope (EN 795-C)
• Multi-user option: lengths from 5 m in accordance with TS 16415-C for simultaneous use by several users, also suitable for abseiling in accordance with EN 12841-C

This multi-purpose lanyard for working at height is extremely versatile and complies with several standards: EN 358 (work positioning), EN 795-B/C (temporary anchor devices and horizontal guide ropes) and largely EN 12841-C (descender device)*.

Equipped with a control lever regulator, it enables controlled, jerk-free gliding of the rope. As soon as the lever is released, the system locks automatically. Retightening or releasing is possible without any problems, even under tension.

It can be attached to both the lateral and ventral attachment points of a full-body harness. When used as a temporary anchorage device (EN 795-B), it is looped around a load-bearing structure. From a length of 5 m, it also complies with TS 16415-C and is suitable as a horizontal guide rope for several simultaneous users. It can also be used as a temporary rope guide system in accordance with EN 795-C.This multi-purpose lanyard for working at height is extremely versatile and complies with several standards: EN 358 (work positioning), EN 795-B/C (temporary anchor devices and horizontal guide ropes) and largely EN 12841-C (descender device)*.

Equipped with a control lever regulator, it enables controlled, jerk-free gliding of the rope. As soon as the lever is released, the system locks automatically. Retightening or releasing is possible without any problems, even under tension.

It can be attached to both the lateral and ventral attachment points of a full-body harness. When used as a temporary anchorage device (EN 795-B), it is looped around a load-bearing structure. From a length of 5 m, it also complies with TS 16415-C and is suitable as a horizontal guide rope for several simultaneous users. It can also be used as a temporary rope guide system in accordance with EN 795-C.*Note on EN 12841-C: The device meets all requirements of this standard with the exception of points 4.1.2 (compatibility) and 4.1.3 (opening protection), as an opening – as required by EN 12841-C – is not provided for in the design of devices in accordance with EN 358.

• Precise control: regulator with control lever enables smooth gliding, safe locking and rope movement even under tension
• Versatile use: Can be used as a positioning device (EN 358), temporary anchorage device (EN 795-B) or temporary guide rope (EN 795-C)
• Multi-user capable: lengths from 5 m in accordance with TS 16415-C for simultaneous use by several users, also suitable as an abseiling device (EN 12841-C*)

This multi-purpose lanyard for working at height is versatile and certified for various applications: as an adjustable positioning rope (EN 358), temporary anchorage device (EN 795-B), horizontal guide rope (EN 795-C / TS 16415-C) and largely as an abseiling device in accordance with EN 12841-C*.

The integrated regulator with control lever enables smooth, controlled gliding of the rope and locks automatically as soon as the lever is released – the rope can also be easily retracted or released under tension. The lanyard can be used on both the lateral and ventral attachment points of a full body harness.

As a temporary anchorage device, it is placed around a suitable structure in accordance with EN 795-B. From a length of 5 m, it also complies with TS 16415-C and allows simultaneous use by several people. It can also be used as a temporary guide rope in accordance with EN 795-C.

*EN 12841-C:
TECHNICAL NOTES.
The device meets all the requirements of the standard EN 12841: 2006-C (descender devices). Only points 4.1.2 (compatibility) and 4.1.3 (opening prevention) have not been taken into account, as there is an incompatibility between the requirements of EN 358 (the device cannot be opened) and those of EN 12841-C (the device can be opened manually).

• Flexibility: LORY X is a tether that can be adjusted under load for optimum working position
• Safety: anti-panic function prevents jerky rope movement if the lever is pulled too hard
• Easy to maintain: rope can be replaced with an Allen key, rope thickness 11 mm

LORY X (model with carabiners OVALOY TRI / ATTACK) is a work positioner that can be adjusted under loads. The device has a handle for setting it to an optimal working position while in motion. An integrated panic function prevents unintended lurching rope movement if the lever is opened too far. The silver button in the middle of the device can no longer be opened by pressing which prevents unintentional opening during use. All that’s needed to exchange the rope when worn or if needed is an Allan wrench size 2. The rope thickness is 11 mm. LORY X can also be used as a backup safety device or lanyard.

• Adjustable work positioning rope when under loads
• Anti-panic function with strong lever
• Rope can be exchanged using an Allan wrench

• Flexible lanyard with infinitely variable length adjustment, even under load
• Additional safety thanks to panic function and secured push button
• Rope change without tools with 2 mm Allen key for 11 mm rope diameter

LORY X (model with carabiners OVALOY TRI / ATTACK) is a work positioner that can be adjusted under loads. The device has a handle for setting it to an optimal working position while in motion. An integrated panic function prevents unintended lurching rope movement if the lever is opened too far. The silver button in the middle of the device can no longer be opened by pressing which prevents unintentional opening during use. All that’s needed to exchange the rope when worn or if needed is an Allan wrench size 2. The rope thickness is 11 mm. LORY X can also be used as a backup safety device or lanyard.

• Easy to use: replacement cable for LORY X, quickly replaceable with size 2 Allen key
• Sustainable solution: Extends the service life of the LORY device when intact
• Practical and efficient: ideal for uncomplicated rope replacement

Replacement role for LORY X. To replace a worn LORY X rope when the LORY device is still intact, all that’s needed is a size 2 Allan wrench.

• EN 341: payload: 30 – 180kg, max. abseiling height: 190 m; rope diameter: 11mm EN 12841-C: max. payload: 225kg; rope diameter: 10-12mm
• EN 795-B: rope diameter: 10.5/11mm ANSI Z359.4

Model: DOUBLE TRI/ATTACK LORY is a robust descender and belay device. Its various application areas make the Lory your reliable companion for rope access and rescue (abseiling up to 225 kg load). LORY is used for work positioning, as a restraining device at roofs or slab edges, as a temporary anchor or for fall arrest in flexible cable systems. With LORY, the belaying person can easily feed and take rope. When using the device correctly, it blocks automatically in case of a fall. The LORY PRO model with its unimpeded movement of the cam is the ideal device for industrial purposes. It is equipped with a descent handle that ensures secured and controlled abseiling. The double-stop function blocks if the handle is pulled overly in panic and provides extra safety.