Power Tools
Showing 37–72 of 147 results
-
M12 SkinsMILWAUKEE M12™ AIRSNAKE™ DRAIN CLEANING AIR GUN (TOOL ONLY)
The M12 AIRSNAKE Drain Cleaning Air Gun is the industry’s first drain cleaning machine designed to clear through drain covers and traps with powered air. The M12 AIRSNAKE allows users to clear clogged drains while leaving fixtures and drain covers intact. Designed for 2.54-10.16cm drain lines, the M12 AIRSNAKE has the power to clear up to 10.6 meters, past vent stacks and tees while the variable pressure dial allows for control on delicate pipe systems. Powered air flushes water out of pipes, completely removing grease and sludge from pipe walls. With the ability to work over sinks and eliminate retrieval mess, Drain professionals, plumbers, and facility maintenance will be able to work faster when clearing clogs. The M12 AIRSNAKE is powered by REDLITHIUM-ION batteries, which deliver more work per charge and more work over pack life than competitors. REDLINK Intelligence provides optimised performance and overload protection against abusive situations.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ CABLE STAPLER (TOOL ONLY)
The Milwaukee® M12™ Cable Stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. Our compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult-to-reach situations. Moveable cable guides ensure proper alignment and the coil-spring mechanism consistently sinks the staples to the appropriate depth when fastening NM-B Sheathed Cable (14, 12, 10 AWG) and low voltage cables, supporting peak stapling productivity. Only compatible with our 25mm (1″) insulated staples (sold separately), the M12™ Cable Stapler gives the user the run-time needed to sink up to 1,200 staples on a fully charged M12™ REDLITHIUM™-ION 2.0Ah battery.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ COMPACT BLOWER (TOOL ONLY)
The M12™ Compact Blower delivers unrivaled power and performance on the M12™ platform. Boasting an air speed of 177 kph and up to 15 minutes of run-time, users will benefit from fast jobsite cleanup for maximum productivity. The axial fan design allows for 4.9 m³/min of air velocity, ensuring debris is cleared from hard-to-reach places. The Compact Blower also features a lightweight design and cruise control lock, reducing user fatigue. The M12BBL comes with three different attachments and is compatiable with all M12™ REDLITHIUM™-ION Batteries.
(0 reviews) -
AutomotiveMILWAUKEE M12™ COMPACT INFLATOR (TOOL ONLY)
The MILWAUKEE M12 Compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. With the capability to complete demanding applications like car, LT truck, and compact equipment tyres, the M12 Compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120PSI, The high efficiency motor and pump top-off car tyres in under 1 minute. The TRUEFILL Auto shut-off technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shut-off at the desired PSI. Additionally, the unit includes a large easy to read back-lit LCD, anti-vibration feet, and 66cm hose with an all brass Schrader chuck.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ CORDLESS 300MM² CABLE CUTTER (TOOL ONLY)
Simplify cable cutting with the one cordless tool that fits comfortably in crowded panels and generates 2,200kg of force. With an open jaw, breakthrough powered ratcheting mechanism and superior blade geometry, the M12 Cable Cutter fits into tight spaces and cuts effortlessly through large-diameter cable, leaving a clean, installation-ready cut. The compact size and scissor-style jaws enable cutting in crowded panels without looping, ratcheting or long arms. Ideal for electricians, datacomm, utility or service contractors or demolition crews, this cable cutter with 2-speed gear case delivers the power needed to cut large-diameter cable, and then switches into high speed to slice quickly through a variety of smaller and more common wire types. Powered by the revolutionary M12 REDLITHIUM-ION Battery (sold separately), this cable cutter can deliver up to 150 cuts of 240mm² Copper XLPE per charge (3.0Ah). A built-in LED light illuminates the line of cut. NOT TO BE USED FOR CABLE WITH STEEL OR STAINLESS STEEL SHEATH.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ CORDLESS COMPACT VACUUM (TOOL ONLY)
The M12 Cordless Compact Vacuum provides more power to clean anywhere. A high performance motor delivers maximum suction for a wide range of construction materials, such as wood chips and metal shavings. With up to 29 minutes of run-time on a single charge*, the M12 Compact Vacuum can be used for spot clean-up or large area vacuuming. Additionally, the M12HV-0 comes with a utility nozzle, crevice tool and extension wand for maximum application versatility. Built to withstand job site conditions, this portable vacuum is backed by a 5-year warranty. *29 minutes with M12 REDLITHIUM-ION 4.0Ah.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ CORDLESS COPPER PIPE CUTTER (TOOL ONLY)
The industry’s first cordless lithium-ion copper tubing cutter cuts up to 10X faster than conventional cutters. Engineered with plumbers, mechanical contractors and builders in mind, this versatile copper pipe cutter runs at 500 RPM. The ultra-efficient gearing allow you to make up to 200 cuts on a single charge. The patent-pending cutting mechanism automatically adjusts diameter to cut copper pipes (OD from ½” to 1-1/8”). The unique rotating cutting head cuts installed copper piping with as little as 37mm clearance, and the lightweight, inline design provides a longer reach and reduces wrist strain when you’re working in confined spaces. A built-in LED light illuminates the cutting surface. The metal cutting head is corrosion and rust resistant, and sealed for water protection, while electronic overload protection and unibody construction provide additional durability. An onboard, real-time battery fuel gauge helps you monitor the charge precisely, so there’s less downtime on the job.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ CORDLESS ROTARY TOOL (TOOL ONLY)
Compact, portable and powerful cutoff solution for the professional. Get the power of a corded rotary tool in the M12 Cordless Rotary Tool, which integrates high-performance motor design, optimized electronics and REDLITHIUM-ION battery technology for exceptional power and durability. This compact, versatile tool offers a variable-speed of 5,000-32,000 RPM and a collet that’s compatible with all 0.8mm – 3.2mm shank accessories for thousands of cutting, grinding, sanding and polishing solutions. Maintenance contractors, electricians, plumbers and automotive mechanics will find it indispensable for close-quarter cutoff and grinding applications. A variable-speed dial offers fluid control, and the 0.6Kg weight permits hours of comfortable use. Grinder-style exhaust ports and front-bearing protection help this tool exceed performance and endurance expectations. The rotary tool comes with five cutting wheels, a mandrel and wrench. M12 battery sold separately.
(0 reviews) -
Laser LevelsMILWAUKEE M12™ CROSS + 4 POINTS LASER (TOOL ONLY)
Our M12™ Green Cross Line & 4-Points Laser provides all-day runtime and the best visibility in its class. Using our M12™ REDLITHIUM™-ION 3.0Ah Compact Battery (M12B3 sold separately), users get 9+ hours of continuous runtime for ultimate productivity. The high-intensity green laser offers our users superior visibility up to 38 Meters for long-range applications. The vertical and horizontal lines make alignment and level applications easy for our users, while the additional 4-points allow for quick transfers from floor to ceiling and squaring applications. The integrated magnetic bracket features micro-control and pivots on the plumb point for easy and fast alignment. The amplified rare earth magnets provide a stronghold and will not slide on steel studs, while an integrated hang hole makes setup easy and efficient in any environment. As part of the industry-leading M12™ System, our laser is compatible with all M12™ Batteries.
(0 reviews) -
Laser LevelsMILWAUKEE M12™ CROSS LINE + 2 PLUMB LASER (TOOL ONLY)
The M12™ Cross Line + 2 Plumb laser provides an all-in-one functionality with horizontal levelling, vertical alignment and plumb point transfer from floor to ceiling. Powered by our M12™ batteries, users will get 15hours of continuous run-time with a M12B3 battery pack for ultimate productivity. The high-intensity green laser offers you superior visibility up to 38m for long-range applications. The vertical and horizontal lines make alignment and level applications easy, while the two plumb dots allow for quick transfers from floor to ceiling. The integrated magnetic bracket features micro control and pivots on the plumb point for easy and fast alignment. The M12™ Cross Line + 2 Plumb Laser features amplified rare earth magnets, providing a strong hold onto metal surfaces with the integrated screw and nail hang holes allowing easy and efficient setup in any environment.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ DRAIN SNAKE (TOOL ONLY)
The M12 Drain Snake is the ultimate service plumbing solution for tough jobs up to 60mm max drain lines; and weighing only 4.8kg. It’s the lightest battery powered professional drain cleaner on the market. It’s unique, hybrid design provides the benefits of both handheld and floor based drain cleaners in one machine. The tool’s fixed drum shield with flat base protects users and fixtures while providing maximum tool support for easy cable feed. Plumbers, facility maintenance, and property managers will eliminate setup time when they switch from their corded drain cleaning machines to the M12 Drain Snake. Powered by REDLITHIUM-ION battery pack which delivers more work per charge and more work over pack life than the competitors. REDLINK Intelligence provides optimised performance and overload protection against abusive situations.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ FORCE LOGIC™ PRESS TOOL (TOOL ONLY)
The M12 FORCE LOGIC Press Tool is the single lightest press tool in the market today and represents a new level in portability and accessibility around installed pipe. Featuring a one-handed, in-line design, the M12 FORCE LOGIC Press Tool will operate nearly anywhere you can fit your arm. Utilising MILWAUKEE REDLINK PLUS Electronics, the M12 FORCE LOGIC Press Tool monitors the force output to ensure quality connections and provide the user peace of mind by visually indicating both a secure connection and when the tool needs calibration. Featuring the best calibration standard in the industry, the tool only require service every 32,000 crimps. This allows users more connections between services, keeping the tool on the job site longer. When used with M12 FORCE LOGIC Press Jaws this tool delivers quality press connections. Powered by the M12 REDLITHIUM-ION battery means this is the only press system where you can Cut, Fasten and Connect on one system.
(0 reviews) -
Laser LevelsMILWAUKEE M12™ GREEN 360° SINGLE PLANE LASER (TOOL ONLY)
The M12™ Green 360° Single Plane Laser provides all-day runtime and uncompromised visibility. The user will benefit from 30+ hours of continuous runtime when paired with an M12™ REDLITHIUM™-ion 4.0Ah Battery (sold separately) for ultimate productivity. The high-intensity green laser offers superior visibility with up to a 50m range for long-range applications. The 360° horizontal plane is ideal for setting drop ceiling elevations, soffits, or easy leveling of large spaces with one tool. The tether ready lanyard hole is great for tying up the MILWAUKEE® M12™ laser, eliminating drops. The magnetic laser level has an integrated bracket with amplified rare earth magnets for a stronger hold that will not slide on steel studs. The integrated hang hole makes setup easy and efficient in any environment. As a part of our industry-leading M12™ System, this 360° laser level is compatible with all M12™ Batteries.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ M-SPECTOR™ 360 3M INSPECTION CAMERA
The Milwaukee M12™ M-Spector™ 360 3 meter Inspection Camera delivers clearer images for easier inspections. The 4.3” LCD screen with 720p camera provides crisp, clear images. The 10mm camera head allows for easy access while the cable balances flexibility and rigidity for both drain line and behind wall inspections. Additionally share photos and videos via an SD card. The M-Spector™ 360 features 360° degrees of image rotation for easy adjustment by physically rotating the screen or with the push of a button. Quickly focus on points of interest with 3 levels of zoom. This inspection camera also includes a 5-mode brightness adjustment to change the LED output.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ RIGHT ANGLE DRILL/DRIVER (TOOL ONLY)
Work more efficiently with the most versatile right angle drill. With a head size of just 95mm, this M12 Right Angle Drill/Driver is compact and lightweight for drilling and fastening in tight spaces, yet delivers 12Nm of torque. It’s the first subcompact with a spindle lock chuck for maximum versatility and grip. It also features the industry’s first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. The M12 REDLITHIUM-ION battery pack delivers more work per charge and more work over pack life than the competitors. The onboard fuel gauge helps you monitor the charge precisely, so there’s less downtime on the job, and a built-in LED Light illuminates the work surface. An extended paddle switch gives you ultimate comfort and convenience during prolonged use
(0 reviews) -
M12 SkinsMILWAUKEE M12™ SOLDERING IRON (TOOL ONLY)
The M12 Soldering Iron delivers fast application speeds by reaching operational temperature in under 18 seconds and maintaining an optimised temperature throughout the most demanding applications. The heat indicator utilises REDLINK INTELLIGENCE to notify users when the tool is ready-to-use and safe-to-store, eliminating the guesswork. The 3-stop pivoting head provides unmatched access by allowing users the ability to adapt the tool for the application and solder in more confined spaces. The M12 Soldering Iron powered by REDLITHIUM-ION battery technology delivers up to 45 minutes of run-time on a M12 2.0Ah Battery Pack.
(0 reviews) -
M12 SkinsMILWAUKEE M12™ STICK TRANSFER PUMP (TOOL ONLY)
The M12™ Stick Transfer Pump delivers maximum filtration for uninterrupted pumping in catch basins, water meter boxes, trenches, sump pump pits, and more. Featuring a 91 cm submersible aluminium barrel, this transfer pump provides the extension needed to reach water at the bottom of trenches and hard to reach areas. Equipped with HydroPass filter technology, the 360° filter maximises flow in heavy debris, minimising downtime caused by clogging. Powered by the M12™ battery platform, this water transfer pump eliminates repetitive manual pumping and improves control, requiring only one hand to pump, freeing the other to control the outflow. With a 4.6 metre max head height and an outlet compatible with a standard 19 mm garden hose, this pump delivers the power to push water farther – out of pits and basins, over walls, and to the ideal deposit location. Compatible with all of our M12™ REDLITHIUM Batteries this pump keeps you productive, effortlessly pumping up to 34 Litres per minute and 1,040 Litres when using a M12™ REDLITHIIUM™-ION 4.0 Ah battery pack
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 1/2″ COMPACT IMPACT WRENCH WITH FRICTION RING (TOOL ONLY)
The M18 FUEL™ 1/2″ Compact Impact Wrench with Friction Ring delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE™ Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 1/2″ Compact Impact Wrench with Friction Ring has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 1/2″ COMPACT IMPACT WRENCH WITH PIN DETENT (TOOL ONLY)
The M18 FUEL™ 1/2″ Compact Impact Wrench with Pin Detent delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE™ Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 1/2″ Compact Impact Wrench with Pin Detent has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 1/2″ HIGH TORQUE IMPACT WRENCH WITH FRICTION RING (TOOL ONLY)
The M18 FUEL High Torque ½” Impact Wrench with Friction Ring provides a full corded replacement delivering 1354Nm of fastening torque and 1897Nm of nut-busting torque. The industry’s most compact cordless High Torque Impact wrench at 213mm in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This tool includes a ½” Friction Ring anvil which provides quick changing sockets. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 1/2″ MID-TORQUE IMPACT WRENCH WITH PIN DETENT (TOOL ONLY)
The M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Pin Detent delivers access in tight spaces, up to 881 Nm of nut-busting torque, and maximum power to weight ratio. This battery-powered impact wrench weighs only 1.58 kg, makin it extremely versatile, capable of performing a wide variety of applications. A POWERSTATE™ Brushless Motor provides the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The MILWAUKEE® 1/2″ Mid-Torque Impact Wrench with Pin Detent is only 152 mm in length, providing users access to stubborn fateners where larger impact wrenches cannot fit without needing to disassemble components to reach bolts. Tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 48 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 1/4″ BRAKING DIE GRINDER WITH SLIDE SWITCH (TOOL ONLY)
The M18 FUEL™ 1/4″ Braking Die Grinder with Slide Switch delivers corded performance allowing users to remove up to 305mm of weld bead per charge on a M18B5. Equipped with RAPIDSTOP™ technology that provides braking in under 2 seconds, the M18 FUEL™ 1/4″ Braking Die Grinder with Slide Switch enhances safety while maximising productivity. The POWERSTATE™ brushless motor delivers 27,000 RPM and maximum power to allow users to maintain grinding power while in the tight spaces. The cordless braking die grinder has up to 55mm accessory compatibility for surface prep applications and material removal while featuring REDLINK PLUS™ Intelligence, an advanced system of cordless power tool electronics, for maximum performance and tool life.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 1/4″ HEX IMPACT DRIVER (TOOL ONLY)
The M18 FUEL™ 1/4″ Hex Impact Driver features the POWERSTATE™ Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 1/4″ RIVET TOOL WITH ONE-KEY™ (TOOL ONLY)
The M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ delivers fast cordless riveting. It eliminates the need for hoses and compressors while delivering maximum life. This rivet gun significantly increases productivity and portability, and ensures a higher level of safety. The premium steel alloy 3-jaw design delivers more work between jaw changes. While lightweight, the M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ has been designed to withstand harsh shop or assembly plant environments. Manufactured with an all-metal gearcase, impact strength plastics, and protective over-mold the tool is designed for maximum durability. The POWERSTATE™ Brushless Motor delivers 2,041 kg of pulling force for high strength blind rivets in all materials. This rivet tool pulls up to 900 3/16” (4.76 mm) aluminium or 500 1/4” (6.35 mm) aluminium blind rivets on one charge with an M18™ REDLITHIUM™-ION 2.0Ah battery (not included). REDLINK™ PLUS Intelligence ensures maximum performance and protects the tool and battery against overloads, over-heating, and over-discharge. With ONE-KEY™ compatibility, the tool allows the user to track and manage the tool within their inventory.
(0 reviews) -
M18 Power PacksMILWAUKEE M18 FUEL™ 10 PIECE POWER PACK 10C3
WHAT’S INCLUDED
M18 FUEL™ 13mm Hammer Drill/Driver (Tool Only)
M18 FUEL™ 1/4″ Hex Impact Driver (Tool Only)
M18 FUEL™ 1/2″ Compact Impact Wrench with Friction Ring (Tool Only)
M18 FUEL™ 125mm (5″) Angle Grinder with Deadman Paddle Switch (Tool Only)
M18 FUEL™ 165mm Circular Saw (Tool Only)
M18 FUEL™ HACKZALL™ Reciprocating Saw (Tool Only)
M18 FUEL™ Multi-Tool (Tool Only)
M18™ Compact Blower (Tool Only)
M18™ Pivoting Area Light (Tool Only)
M18™ 7.5 Litre Wet/Dry Vacuum (Tool Only)
(0 reviews) -
M18 Power PacksMILWAUKEE M18 FUEL™ 11 PIECE POWER PACK 11A3
WHAT’S INCLUDED
M18 FUEL™ 13mm Hammer Drill/Driver (Tool Only)
M18 FUEL™ 1/4″ Hex Impact Driver (Tool Only)
M18 FUEL™ 184mm Circular Saw (Tool Only)
M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Friction Ring (Tool Only)
M18 FUEL™ 125mm (5″) Angle Grinder with Deadman Paddle Switch (Tool Only)
M18 FUEL™ 26mm SDS Plus Rotary Hammer (Tool Only)
M18 FUEL™ D-Handle Jigsaw (Tool Only)
M18 FUEL™ SAWZALL™ Reciprocating Saw (Tool Only)
M18™ LED Work Light (Tool Only)
M18 FUEL™ Multi-Tool (Tool Only)
M18™ 7.5 Litre Wet/Dry Vacuum (Tool Only
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 125MM (5″) FLATHEAD BRAKING ANGLE GRINDER W/ DEADMAN PADDLE SWITCH (TOOL ONLY)
The M18 FUEL™ 125mm (5″) Flathead Braking Angle Grinder with Deadman Paddle Switch is the newest addition to Milwaukee’s cordless angle grinder line-up. The M18FAGF125XPDB features a low profile flathead design that can fit into 42° angles for greater accessibility into tight spaces. The POWERSTATE™ Brushless Motor delivers 8,500 RPM and maximum sustained power to complete even the toughest grinding and cutting applications whilst REDLINK™ PLUS Intelligence ensures unmated levels of performance, protection, and compatibility. The M18 FUEL™ 125mm (5″) Flathead Braking Angle Grinder with Deadman Paddle Switch provides enhanced performance, runtime, and accessibility.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 125MM (5″) VARIABLE SPEED BRAKING ANGLE GRINDER WITH DEADMAN PADDLE SWITCH (TOOL ONLY)
The M18 FUEL™ 125mm (5″) Variable Speed Braking Angle Grinder with Deadman Paddle Switch brings versatility of variable speed to the M18 FUEL™ angle grinder range. The POWERSTATE™ Brushless Motor delivers a range of 3,500 to 8,500 RMP for use with a variety of materials and applications. The RAPID STOP™ brake stops the disc in under 2 seconds. REDLINK™ PLUS Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL™ 125mm (5″) Variable Speed Braking Angle Grinder with Deadman Paddle Switch includes an electronic clutch for kickback protection, as well as overload protection to maximise motor life. With tool-free accessory and guard adjustments, users will experience fast accessory changes, and less downtime, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL™ 125mm (5″) Variable Speed Braking Angle Grinder with Deadman Paddle Switch takes cordless grinders to the next level.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 13MM DRILL/DRIVER (TOOL ONLY)
The M18 FUEL 13mm Drill Driver provides maximum power and fast speeds under heavy load, in a compact design. The POWERSTATE Brushless motor delivers 135Nm of torque and 2,000 RPMs, providing fast drilling through demanding applications. At 175mm in length, this is the most compact drill in its class, giving better access in tight spaces and reducing fatigue. The REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating and over-discharge. The all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 15 GAUGE ANGLED FINISHING NAILER (TOOL ONLY)
The M18 FUEL™ 15 Gauge Angled Finishing Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the 15 Gauge Nailer allows the user to consistently sink nails to the required depth in hard and soft woods while leaving clean nail holes, allowing for repeatable results and easy filling. The nitrogen air spring mechanism, combined with our POWERSTATE™ Brushless Motor and REDLINK™ PLUS Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, for minimal down time and maximum efficiency throughout the job. The nailer also features a compact and ergonomic design providing access into tight spaces where nailing is required while limiting fatigue when using the tool. When paired with a M18™ REDLITHIUM™-ION 2.0Ah battery, the nailer fires up to 750 nails per charge. The MILWAUKEE® M18 FUEL™ 15 Gauge Angled Finishing Nailer delivers the pneumatic performance that professional users demand, with the freedom and convenience of cordless.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 150MM (6″) RANDOM ORBITAL POLISHER (TOOL ONLY)
By harnessing the power, performance, and run-time of M18 FUEL™ technology, the M18 FUEL™ Random Orbital Polisher delivers corded performance while providing you with the freedom to work anywhere. This battery-powered polisher gives you total control with its variable speed trigger, 8-position speed dial with RPM settings ranging from 2,400-4,500 RPM, trigger lock-on button, and maintains speed under load. The M18 FUEL™ Random Orbital Polisher frees you from the fear and frustration you may face in applications from surface damage or cord management. With over 50mm of battery clearance and proper use, you can rest assured that their work surface is protected from dents and scratches. The MILWAUKEE® M18 FUEL™ Random Orbital Polisher provides the run-time necessary to keep professionals productive during polishing and heavy correction applications when paired with M18™ REDLITHIUM™-ION HIGH OUTPUT™ 6.0Ah batteries. This polishing tool is easy to use and comfortable for extended periods with an optimised center of balance and ergonomic design.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 15GA FINISH NAILER (TOOL ONLY)
The M18 FUEL 15ga Finish Nailer delivers on the promise of peak productivity at your worksite, providing unmatched driving power, speed and efficiency – with practically no set up and minimal maintenance. Using the exceptional application speed, power and durability of our compact POWERSTATE Brushless Motor, plus our ready to fire cylinder design, this tool is capable of fully sinking 64mm nails into solid oak with zero ramp-up time. This 18-volt nailer operates from the revolutionary REDLITHIUM-ION Battery for unbeatable strength and run-time, eliminating the mess and cost of gas cartridges. It also includes REDLINK PLUS Intelligence, the most advanced electronic system on the market, to prevent damage to the nailer and battery from overloading and overheating. The M18 FUEL Nailer not only primes you for top performance; it also creates the experience of a pneumatic nailer that professional carpenters and remodelers expect, without the hassle of compressors and hoses.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 16 GAUGE ANGLED FINISHING NAILER (TOOL ONLY)
The M18 FUEL™ 16 Gauge Angled Finishing Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the 16 Gauge Nailer allows the user to consistently sink nails to the required depth in hard and soft woods while leaving clean nail holes, allowing for repeatable results and easy filling. The nitrogen air spring mechanism, combined with our POWERSTATE™ Brushless Motor and REDLINK™ PLUS Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, for minimal down time and maximum efficiency throughout the job. The nailer also features a compact and ergonomic design providing access into tight spaces where nailing is required while limiting fatigue when using the tool. When paired with a M18™ REDLITHIUM™-ION 2.0Ah battery, the nailer fires up to 750 nails per charge. The MILWAUKEE® M18 FUEL™ 16 Gauge Angled Finishing Nailer delivers the pneumatic performance that professional users demand, with the freedom and convenience of cordless.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 165MM CIRCULAR SAW (TOOL ONLY)
The M18 FUEL 165mm Circular Saw is the fastest saw in its class, offering fast cutting speeds, maximum runtime and longer tool life. The POWERSTATE Brushless Motor outpowers all other 18-Volt cordless circular saws and allows you to perform jobs that previously required a corded tool. The M18 REDLITHIUM-ION 5.0Ah Extended Capacity Battery Pack (not included) delivers maximum runtime and provides more work per charge and more work over the life of the pack. The saw’s REDLINK PLUS Intelligence ensures optimised performance and protection from overloading, overheating and over-discharging. The 18-volt circular saw’s guards and shoe are built of cast magnesium to provide a durable, lightweight base. The saw also features an integrated LED light and a rafter hook for convenient storage on the job. The saw includes a blade wrench and a blade.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 18 GAUGE BRAD FINISHING NAILER (TOOL ONLY)
The M18 FUEL™ 18 Gauge Brad Finishing Nailer delivers peak productivity on the jobsite, providing users with the power to nail, without the hassle of a compressor and hose. Leveraging Milwaukee’s nitrogen air spring mechanism, the M18 FUEL™ 18 Gauge Brad Finishing Nailer allows users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of the POWERSTATE™ Brushless Motor and REDLINK™ PLUS Intelligence delivers users the ability for fast nailing, with a fire rate of 3 nails per second (in contact actuation mode) with zero ramp-up time, for maximum efficiency throughout the day. Additionally, the nailer operates using our REDLITHIUM™-ION batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and maintenance associated with other nailers. The M18 FUEL™ 18 Gauge Brad Finishing Nailer is compact in size, and lightweight, providing the user with unmatched access into tight spaces and limiting fatigue with low recoil. The M18 FUEL™ 18 Gauge Brad Finishing Nailer delivers the pneumatic performance that professional carpenters and remodelers expect, with the freedom and convenience of cordless technology.
(0 reviews) -
M18 SkinsMILWAUKEE M18 FUEL™ 180MM VARIABLE SPEED POLISHER (TOOL ONLY)
The M18 FUEL™ 180mm Variable Speed Polisher is the world’s first cordless full-size rotary polisher. By harnessing the power, performance and run-time of M18 FUEL™ technology, this tool delivers corded performance that allows users to power through the most demanding applications. At more than 450g lighter than corded, and the ability to deliver total control through a variable speed dial and trigger, the new M18 FUEL™ Polisher frees users from the extra work, distractions, paint damage, and inconvenience caused by cords. Paired with M18™ 5.0Ah REDLITHIUM™-ION batteries, the M18 FUEL™ Polisher can complete a full-size car on one charge when working on moderate to good paint.The M18 FUEL™ Polisher is equipped with a rubber overmold front housing to protect the paint from scratches in use as well as a removable dust cover to protect the motor and electronics from wool fibers and residue. The new tool is designed to distribute more of its weight over the pad, providing natural pressure on the surface area and more.
(0 reviews)
