Hand Tools
Showing 73–108 of 203 results
-
Punches & Punch SetsITM Groz Nail Punches
Manufactured from high grade carbon steel, accurately hardened and tempered for increased service life. Clean-cut knurled round shank provides a positive non-slip grip. The 9.5mm (3/8″) square head provides a larger striking area and also prevents the punch from rolling off. The striking end is chamfered to prevent breakage. This range of punches has a black oxide finish.
Nail Punches are designed for driving nail heads below the surface of wood. The working end is cupped to follow the nail head without sliding off. These can also be used to remove nails that have an exposed point.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Punches & Punch SetsITM Groz Number Punch Sets
Manufactured from quality carbon steel. Punches are induction hardened, which gives durability and extended life for repeated use. The hardness at the stamping end is maintained at 58-62 HRC, the striking end is tempered to 38-43 HRC. This prevents the punch from splintering during use. The striking end is chamfered to prevent breakage.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MicrometersITM Groz Outside Micrometer
Ratchet stop.
Enamel frame.
Carbide anvil with 0.000024″ (0.6 mircron) flatness.
Accuracy : 4 micron (0.00015″).
Resolution : 0.01mm.
Ratchet thimble.
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
MicrometersITM Groz Outside Micrometer Set
Ratchet stop.
Enamel frame.
Carbide anvil with 0.000024″ (0.6 mircron) flatness.
Accuracy : 4 micron (0.00015″).
Resolution : 0.01mm.
Ratchet thimble.
Supplied with master for periodic calibration (except 0 – 25mm & 0 – 1″).
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Punches & Punch SetsITM Groz Pin Punch Set 4pc
Features
These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish.
Single piece construction with a 45mm (1-3/4″) long pin.Specifications
4 Piece Set Includes:
1/8″
5/32″
3/16″
1/4″
Vinyl Pouch(0 reviews) -
Punches & Punch SetsITM Groz Pin Punch Set 5pc
Features
These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish.
Two piece construction with a 90mm (3-3/4″) long pin. The two piece construction allows the pin to have a separate hardness from the body which prevents “œpeening” and also ensures complete straightness over such a long length.Specifications
5 Piece Set Includes:
1/8″
3/16″
1/4″
5/16″
3/8″
Vinyl Pouch(0 reviews) -
Punches & Punch SetsITM Groz Pin Punch Set 8pc
Features
These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish.
Two piece construction with a 90mm (3-3/4″) long pin. The two piece construction allows the pin to have a separate hardness from the body which prevents “œpeening” and also ensures complete straightness over such a long length.Specifications
8 Piece Set Includes:
1/16″
3/32″
1/8″
5/32″
3/16″
1/4″
5/16″
3/8″
Vinyl Pouch(0 reviews) -
Punches & Punch SetsITM Groz Pin Punch Set 8pc
Features
These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish.
Single piece construction with a 45mm (1-3/4″) long pin.Specifications
8 Piece Set Includes:
1/16″
3/32″
1/8″
5/32″
3/16″
7/32″
1/4″
5/16″
Round Wooden Case(0 reviews) -
Gauges & IndicatorsITM Groz Radius Gauges
Very useful for tool and diemakers, machinists, screw machine operators and pattern makers to lay out and check radii of tools, dies, and patterns.
Made of stainless steel.
Size is marked on each gauge leaf.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Punches & Punch SetsITM Groz Roll Pin Punch Set 6pc
Features
Single piece construction with hexagonal shank imparts additional durability. Body has a premium powder coated finish with chamfered striking end that helps reduce mushrooming & chipping.
The heat – treated point has a rounded ball to centre the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal and eliminating any damage to the pin or wall.Specifications
6 Piece Set Includes:
2.5mm
3mm
4mm
5mm
6mm
8mm(0 reviews) -
Punches & Punch SetsITM Groz Roll Pin Punches
Single piece construction with hexagonal shank imparts additional durability. Body has a premium powder coated finish with chamfered striking end that helps reduce mushrooming & chipping.
The heat-treated point has a rounded ball to centre the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal and eliminating any damage to the pin or wall.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Gauges & IndicatorsITM Groz Screw Cutting Gauge
Manufactured from hardened and polished stainless steel, all gauge surfaces are accurately ground.
It is most useful for checking tool angle while cutting threads in metal turning lathes. The angle on the thread cutting tool is checked on the V slots in the gauge.
Relief at the end of each slot enables proper seating of the cutting tool in the slot thus ensuring correct angle.
The gauge clearly indicates 55° for Whitworth and BSF Threads; 47-1/2° for BA Threads, 60° for Metric and American National Threads and 14-1/2° for Acme threads.(0 reviews) -
Gauges & IndicatorsITM Groz Sheet Metal & Wire Gauge
Made from heavy gauge hardened stainless steel.
Designed for measuring steel wire, hot & cold rolled steel sheet etc & check sizes from 0 to 36 gauge.
The gauge has metric dimensions marked on one side and gauge markings on the other.
Accuracy : within 100 microns.(0 reviews) -
Gauges & IndicatorsITM Groz Universal Surface Gauge
A basic tool for machinists and toolmakers, the Universal Surface Gauge is used for accurately scribing lines, transferring measurements or probing surfaces in inspection work.
Design incorporates:.
A fully hardened and ground base which serves as an accurate reference surface.
A machined Vee groove in the base allows the gauge to be used conveniently on curved surfaces.
A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as a height gauge and also as a depth gauge.
Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work.
A 6.34 mm hole in the spring loaded scriber holder allows a dial indicator to be attached conveniently making the gauge useful for checking flatness, parallelism, heights, depths etc.
Grooves on the side of the base allow for comfortable grip.
Well tapered scriber for better sighting while working. The scriber tip is hardened to 55-60 HRC.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Vernier CalipersITM Groz Vernier Caliper
Metric & Imperial.
Stainless steel rule.
Convenient to use thumb screw locking mechanism.
Suitable for inside, outside, depth & step measurements.
Lower resolution : 0.02mm(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Depth GaugesITM Groz Vernier Depth Gauge
Made from stainless steel with thumbscrew locking mechanism.
Metric & Imperial.
Extendable depth gauge.
Accuracy : ± 0.05mm.
Resolution : 0.05mm.
Supplied in moulded plastic case(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Toggle ClampsITM Horizontal, Flanged Base, Flat Handle
Industrial quality toggle clamp for precision clamping tasks.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Toggle ClampsITM Horizontal, Flanged Base, Straight Handle
Industrial quality toggle clamp for precision clamping tasks.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Toggle ClampsITM Horizontal, Side Mount, Straight Handle
Industrial quality toggle clamp for precision clamping tasks.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Toggle ClampsITM Horizontal, Straight Base, Flat Handle
Industrial quality toggle clamp for precision clamping tasks.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Magnetic Welding ClampsITM Inside & Outside Adjustable Angle Welding Magnet, 17kgs Force 95mm 60° & 90°, Powerful NDFEB Magnet
Features
- Powerful NdFeB magnet
- Create 90° corners by holding from the outside providing you with an unobstructed area for inside welds
- Use the different outer edges of the magnet to set up metal at 30°, 60° and 90°
- Includes 2 welding magnets
Specifications
Size: 95mm
Force: 17kg
Angles: Inside: 90°, Outside: 60°(0 reviews) -
Magnetic Welding ClampsITM Inside & Outside Adjustable Angle Welding Magnet, 22kgs Force 105mm 20° to 200°, Powerful NDFEB Magnet
Features
- Powerful NdFeB magnet
- Hold metal at 20° to 200° from the outside providing you with an unobstructed area for inside welds, or hold from the inside for outside welds
- Strong locking bolt and accurate gradient scale ensures the required angles are achieved correctly
Specifications
Size: 105mm
Force: 22kg
Angles: 20° To 200°(0 reviews) -
Magnetic Welding ClampsITM Inside & Outside Adjustable Angle Welding Magnet, 30kgs Force 84mm 30°, 60° & 90°, Powerful NDFEB Magnet
Features
- Powerful NdFeB magnet
- Create 90° corners by holding from the outside providing you with an unobstructed area for inside welds
- Use the different outer edges of the magnet to set up metal at 30°, 60° and 90°
- Includes 2 welding magnets
Specifications
Size: 84mm
Force: 30kg
Angles: 30°, 60°, 90°(0 reviews) -
Magnetic Welding ClampsITM Inside & Outside Adjustable Angle Welding Magnet, 35kgs Force 110mm 30°, 60° & 90°, Powerful NDFEB Magnet
Features
- Powerful NdFeB magnet
- Create 90° corners by holding from the outside providing you with an unobstructed area for inside welds
- Use the different outer edges of the magnet to set up metal at 30°, 60° and 90°
- Includes 2 welding magnets
Specifications
Size: 110mm
Force: 35kg
Angles: 30°, 60°, 90°(0 reviews) -
Magnetic Welding ClampsITM Inside & Outside Adjustable Angle Welding Magnet, 35kgs Force 130mm 20° to 200°, Powerful NDFEB Magnet
Features
- Powerful NdFeB magnet
- Hold metal at 20° to 200° from the outside providing you with an unobstructed area for inside welds, or hold from the inside for outside welds
- Strong locking bolt and accurate gradient scale ensures the required angles are achieved correctly
Specifications
Size: 130mm
Force: 35kg
Angles: 20° To 200°(0 reviews) -
Toggle ClampsITM Latch, Flanged Base, Straight Handle
Industrial quality toggle clamp for precision clamping tasks.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
General MeasuringITM Lutron Digital Tachometer
Multi function, Photo Tachometer (RPM) & Contact Tachometer (RPM, m/min, ft/min).
The last value/max, value/min, value will be automatically stored in memory and can be obtained by the push of a button.
High visibility 5 digit display.
Durable, long lasting components including strong, lightweight ABS-plastic housing.Package Includes:
- Tachometer
- Carry Case
- Reflective Tape (600mm)
- Cone RPM adaptor
- Funel RPM adaptor
- Surface Speed Test Wheel
- User Manual
(0 reviews) -
General MeasuringITM Lutron Sound Level Meter
Features
Time weighting (fast & slow) dynamic characteristic modes.
Maximum Hold Function.
– Stores the maximum value read.
Durable, long lasting components including strong, lightweight ABS-plastic housing, assures maintenance free performanceSpecifications
35 – 130dB range, 0.1dB increments
Comes complete with Carry Case(0 reviews) -
1-1/2" Drive Impact SocketsITM M7 1-1/2″ Drive 6pt Deep Impact Socket Imperial
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1-1/2" Drive Impact Sockets
ITM M7 1-1/2″ Drive 6pt Deep Impact Socket Metric
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1-1/2" Drive Impact SocketsITM M7 1-1/2″ Drive 6pt Impact Socket Imperial
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1-1/2" Drive Impact Sockets
ITM M7 1-1/2″ Drive 6pt Impact Socket Metric
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1" Drive Impact SocketsITM M7 1″ Drive 4pt Impact Deep Socket Metric
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1" Drive Impact SocketsITM M7 1″ Drive 4pt Impact Socket Imperial
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1" Drive Impact Sockets
ITM M7 1″ Drive 4pt Impact Socket Metric
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1" Drive Impact Sockets
ITM M7 1″ Drive 6pt Deep Impact Socket Imperial
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page