Machines, Rigs and Pumps
Showing all 11 results
-
Machines, Rigs and PumpsDYMAXION Accessory Kit for Vacuum Pump/Plate
- 3m of air hose, 2 satin steel tail and socket air fittings, 2 pipe clamps.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Core Drilling Machine 1700 Watt Hand Held 3 Speed 1.1/4 UNC Spindle
- Maximum 90mm diameter core drill in concrete and reconstituted limestone when using a drilling rig.
- Maximum 133mm diameter core drill in brick when drilling by hand.
- Heavy duty die cast aluminium machine casing.
- Low 950 RPM speed for large diameter hand held coring in materials such as brick and limestone.
- High 2400 RPM speed for small diameters used in chemical anchors and glass fence balustrading.
- RCD protection.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Core Drilling Machine 2000 Watt Hand Held 3 Speed 1.1/4 UNC Spindle
- Maximum 160mm diameter core drill in concrete and reconstituted limestone when using a drilling rig.
- Maximum 200mm diameter core drill in brick when drilling by hand.
- Heavy duty entry level trade focused core drill machine.
- Low 400-850 RPM speed for large diameter hand held coring in materials such as brick and limestone.
- High 1550-3450 RPM speed for small diameters used in chemical anchors and glass fence balustrading.
- RCD protection.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Core Drilling Machine 2200 Watt Rig Mounted 3 Speed 1.1/4 UNC Spindle
- Maximum 250mm diameter core drill in reinforced concrete.
- Built in bubble level, water swivel and RCD protection.
- Heavy duty machine suitable for coring through rebar and mesh embedded concrete.
- Designed for the toughest coring operations thick concrete over 300mm thick.
- Angle adjustment.
- Die cast aluminium base and extruded aluminium mast.
- Base includes wheels.
- Four levelling bolts are widely spaced for maximum stability.
- Fitted with stabilising back stays.
- Four nylon guide wheels firmly secure the machine bracket to the mast and allow for smooth travel.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Core Drilling Machine Rig Vertical Only
- Die cast aluminium base and extruded aluminium mast.
- Four levelling bolts are widely spaced for maximum stability.
- Suitable for use with both the PCD1700HH and the AGCDM160.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Core Drilling Machine Rig with Angle Adjustment
- Die cast aluminium base and extruded aluminium mast.
- Base includes wheels.
- Four levelling bolts are widely spaced for maximum stability.
- Fitted with stabilising back stays.
- Four nylon guide wheels firmly secure the machine bracket to the mast and allow for smooth travel.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Replacement Neoprene Vacuum Seal
- Replacement neoprene vacuum seal strip for use in vacuum hold down plate.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Vacuum Air Tank 8Lt Capacity
- The alternative to bolting down a core drilling rig is to use a vacuum system.
- This vacuum air tank can be used in conjunction with the AGVAC140 Vacuum Suction Pump.
- Anti vibration feet support the IP4 protected housing.
- 8 litre capacity.
- In the event of a suction loss from the pump the air tank will maintain the vacuum for several minutes.
- Tank also prevent water and slurry from being drawn into the vacuum pump.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Vacuum Bundle – includes AGVAC140, AGTANK140 & 2.5m Air Hose
- The alternative to bolting down a core drilling rig is to use a vacuum system.
- This bundle includes the AGVAC140 Vacuum Suction Pump and the AGTANK140 Vacuum Air Tank.
- Pump includes a water filter cartridge to prevent moisture damaging electrical components.
- Anti vibration feet support the IP4 protected housing.
- Pump is fitted with inline RCD protection.
- Air flow 30.5 l/min.
- Maximum vacuum -0.9 Bar (-13 PSI).
- Tank has 8 litre capacity.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Vacuum Plate for Rig Base
- Vacuum suction hold down plate for use with Dymaxion core drilling rigs.
(0 reviews) -
Machines, Rigs and PumpsDYMAXION Vacuum Suction Pump 200 Watt
- The alternative to bolting down a core drilling rig is to use a vacuum system.
- Includes a water filter cartridge to prevent moisture damaging electrical components.
- Anti vibration feet support the IP4 protected housing.
- Fitted with inline RCD protection.
- Air flow 30.5 l/min.
- Maximum vacuum -0.9 Bar (-13 PSI).
(0 reviews)