Mixing Nozzles & Dispensing Tips
Showing all 6 results
-
Mixing Nozzles & Dispensing TipsCHEMTOOLS Bayonet Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml & 50ml Dual Cartridges)
The Bayonet Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-50 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Bayonet Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml Dual Cartridges)
The Bayonet Helical Static Mixing Nozzle contains 16 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-25 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Bell Head Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 290ml & 400ml Dual Cartridges)
The Bell Head Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-400 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS F System Static Mixing Nozzle
(10:1 Ratio, Suitable for 4900ml Dual Cartridges)
The F System Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channeling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-490 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(10:1 Ratio, Suitable for 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The smooth, tapered nozzle allows for dispensing directly onto surfaces to be glued, while its rounded shape ensures an easy fit into tight spaces.
The spiralling/bow-tie elements of the inner core repeatedly divide and combine both materials in a circular flow to provide consistent, high quality intermixing, effectively channelling the material radially from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-50 is specially designed for use with most 10:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml & 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 16 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-25 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews)