Industrial Equipment & Supplies
Showing 361–396 of 6362 results
-
InsertsBONDSERT Carbon Steel Thin Wall UNC / UNF
- Bondsert Threaded Inserts provide a stronger fastener assembly in soft materials such as aluminium, magnesium and even cast iron.
- They can be used for repairing stripped threads, and for use in creating stronger threads in original equipment.
- External threads are manufactured with standard size and pitch to permit the use of standard drills and taps.
- The inserts can be installed with a screwdriver, bolt/jam nut, or power drive tool.
- Bondsert Threaded Inserts are vibration resistant.
- Within minutes of installation, the micro-encapsulated adhesive begins to set, and the newly installed inserts are fastener-ready within 5 minutes and will not back out.
- The adhesive seals against liquids and gases up to 6,000 psi when fully cured after 72 hours.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ToolsBONDSERT Drive Tools
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Workshop KitsBONDSERT Range Kits
- Bondsert Threaded Inserts provide a stronger fastener assembly in soft materials such as aluminium, magnesium and even cast iron.
- They can be used for repairing stripped threads, and for use in creating stronger threads in original equipment.
- External threads are manufactured with standard size and pitch to permit the use of standard drills and taps.
- The inserts can be installed with a screwdriver, bolt/jam nut, or power drive tool.
- Bondsert Threaded Inserts are vibration resistant.
- Within minutes of installation, the micro-encapsulated adhesive begins to set, and the newly installed inserts are fastener-ready within 5 minutes and will not back out.
- The adhesive seals against liquids and gases up to 6,000 psi when fully cured after 72 hours.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
InsertsBONDSERT Stainless Steel Heavy Wall UNC / UNF
- Bondsert Threaded Inserts provide a stronger fastener assembly in soft materials such as aluminium, magnesium and even cast iron.
- They can be used for repairing stripped threads, and for use in creating stronger threads in original equipment.
- External threads are manufactured with standard size and pitch to permit the use of standard drills and taps.
- The inserts can be installed with a screwdriver, bolt/jam nut, or power drive tool.
- Bondsert Threaded Inserts are vibration resistant.
- Within minutes of installation, the micro-encapsulated adhesive begins to set, and the newly installed inserts are fastener-ready within 5 minutes and will not back out.
- The adhesive seals against liquids and gases up to 6,000 psi when fully cured after 72 hours.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
BONDSERT Stainless Steel Thin Wall Metric
- Bondsert Threaded Inserts provide a stronger fastener assembly in soft materials such as aluminium, magnesium and even cast iron.
- They can be used for repairing stripped threads, and for use in creating stronger threads in original equipment.
- External threads are manufactured with standard size and pitch to permit the use of standard drills and taps.
- The inserts can be installed with a screwdriver, bolt/jam nut, or power drive tool.
- Bondsert Threaded Inserts are vibration resistant.
- Within minutes of installation, the micro-encapsulated adhesive begins to set, and the newly installed inserts are fastener-ready within 5 minutes and will not back out.
- The adhesive seals against liquids and gases up to 6,000 psi when fully cured after 72 hours.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO 11 Pce Screwdriver Power Bit Set + Handle
- 11 Piece Standard Screwdriver Power Bit Pouch with Heavy Duty Screwdriver Handle Handle
- Contains a heavy duty quick change screwdriver handle and a variety of popular Power Bit styles in a tough nylon pouch.
Components:
Part Number Quantity 5400-PH1X100 1 5400-PH2X75 1 5400-PH2X100 1 5400-PH2X150 1 5400-PH3X100 1 5400-PZ2x100 1 5400-HX5x100 1 5400-SR2x100 1 5400-SL4x100 1 5400-SL6x100 1 5750-14DH 1 (0 reviews) -
ScrewdriversBORDO 19 Piece IMPACT Screwdriver Insert Bit, Power Bit and Nutsetter Set with Square Adapators
- 19 Piece IMPACT Screwdriver Insert Bit, Power Bit and Nutsetter Set with MP-QR+ Insert Bit Holder
- Bordo Impact Bits are designed and manufactured for optimum performance in modern impact drivers.
- Not only do they offer significantly increased bit life in impact applications but they also offer exceptional performance in standard driving usage.
- The impact driver action places high peak torque demands on both insert and power bits.
- Our range features a uniquely engineered torsion zone with multi-stage hardening and tempering to dissipate damaging peak loads.
- Many manufacturers spruik the benefits of their “high torque”, “torsion” and “impact” bits.
- The vast majority do not live up to the hype.
- Bordo Impact Bits significantly outperform those of our competitors.
Components:
Part Number Quantity 5405-PH1X50 1 5405-PH2X50 1 5405-PH2X100 1 5405-PH2X150 1 5405-PH3X50 1 5405-HX5X50 1 5405-HX6X50 1 5405-HX8X50 1 5405-SL6X50 1 5405-SR1X50 1 5405-SR2X50 1 5405-SR3X50 1 5505-PH2DX65 1 5605-NS1/4X42 1 5605-NS5/16X65 1 5605-NS3/8X65 1 5615-SD1/4X50 1 5615-SD3/8X50 1 5615-SD1/2X50 1 (0 reviews) -
Chemicals, Lubricants & AdhesivesBORDO 250ml SlickDTR Drilling, Tapping and Reaming Fluid
- 250ml SlickDTR Drilling, Tapping and Reaming Fluid
- SlickDTR is formulated with extreme pressure additives that significantly reduce friction at the cutting edge, extending tool life, increasing performance and producing a superior finish.
- SlickDTR is suitable for use on all metals including hardened steels, titaniums and nimonics.
- Extreme cutting performance.
- Reduces friction for longer tool life.
- Eliminates galling and seizing.
- Improves tool performance.
- Excellent surface finish.
- Extreme pressure performance.
- Aquatically non-toxic.
- Fully biodegradable.
- Derived from renewable resources.
- Safe and easy to use and clean up.
- Australian made from local ingredients.
- Non-irritating.
- No obnoxious fumes.
- Washes off with water.
- Non-flammable.
- Eliminates need for solvent degreasing chemicals and high VOC solvents.
- Very low coefficient of friction.
- Does not contain chlorine, phenols or toxic metals.
(0 reviews) -
BurrsBORDO 3 Pce S3 Express Cut Burr Set
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews) -
Annular Cutters & SetsBORDO 3/4″ Universal Extension
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO 32 Piece IMPACT Screwdriver Insert Bit Set
- Bordo Impact Bits are designed and manufactured for optimum performance in modern impact drivers.
- Not only do they offer significantly increased bit life in impact applications but they also offer exceptional performance in standard driving usage.
- The impact driver action places high peak torque demands on both insert and power bits.
- Our range features a uniquely engineered torsion zone with multi-stage hardening and tempering to dissipate damaging peak loads.
- Many manufacturers spruik the benefits of their “high torque”, “torsion” and “impact” bits.
- The vast majority do not live up to the hype.
- Bordo Impact Bits significantly outperform those of our competitors.
PH1, PH2(x3), PH3, PH2 Grippa, SL4, SL5, SL6, HX5, TL, PZ1, PZ2, PZ3, TX10, TX15, TX20, TX25, TX27, TX30, TX40, SR1, SR2, SR3, TX10TR, TX15TR, TX20TR
(0 reviews) -
ScrewdriversBORDO 32 Piece IMPACT Screwdriver Insert Bit, Power Bit and Nutsetter Set with MP-QR+ Insert Bit Holder
- 32 Piece IMPACT Screwdriver Insert Bit, Power Bit and Nutsetter Set with MP-QR+ Insert Bit Holder
- Bordo Impact Bits are designed and manufactured for optimum performance in modern impact drivers.
- Not only do they offer significantly increased bit life in impact applications but they also offer exceptional performance in standard driving usage.
- The impact driver action places high peak torque demands on both insert and power bits.
- Our range features a uniquely engineered torsion zone with multi-stage hardening and tempering to dissipate damaging peak loads.
- Many manufacturers spruik the benefits of their “high torque”, “torsion” and “impact” bits.
- The vast majority do not live up to the hype.
- Bordo Impact Bits significantly outperform those of our competitors.
Components:
Part Number Quantity 5305-PH1X25 1 5305-PH2X25 2 5305-PH3x25 1 5305-HX5X25 1 5305-SR1X25 1 5305-SR2X25 1 5305-SR3X25 1 5305-SL6X25 1 5405-PH1X50 1 5405-PH2X50 1 5405-PH2X75 1 5405-PH2X100 1 5405-PH2X150 1 5405-PH2GX150 1 5405-PH3X50 1 5405-HX5X50 1 5405-HX6X50 1 5405-SR1X50 1 5405-SR1X150 1 5405-SR2X50 1 5405-SR2X75 1 5405-SR2X150 1 5405-SR3X50 1 5405-SR3X150 1 5405-SL6X50 1 5405-SL6X50 1 5605-NS1/4X65 1 5605-NS5/16X65 1 5605-NS5/16X150 1 5605-NS3/8X65 1 5605-NS7/16X65 1 5360-MPQR1/4X70 1 (0 reviews) -
ScrewdriversBORDO 34 Pce Screwdriver Power Bit Set
- 34 Piece Standard Screwdriver Power Bit Set
- Contains a variety of popular Power Bit styles and a quick change adaptor in a tough case.
Components:
Part Number Quantity 5400-PH1x50 2 5400-PH2x50 3 5400-PH2Gx50 3 5400-PH3x50 2 5400-PZ1x50 2 5400-PZ2x50 2 5400-PZ3x50 2 5400-SL3x50 2 5400-SL4x50 2 5400-SL5x50 2 5400-SL6x50 2 5400-SL8x50 2 5400-HX5x50 2 5400-SR1x50 2 5400-SR2x50 2 5600-NS5/16X42 1 5750-14×65 1 (0 reviews) -
Drill Bits & SetsBORDO 4 Cutter Glass and Tile Drill Hex Shank
- Tungsten Carbide 4 Cutter Glass and Tile Drill
- Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
- Fast starting with reduced bit wander.
- Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
- Not suitable for use with toughened or laminated safety glass.
- Use a slow speed with steady but gentle pressure.
- Reduce the pressure at break through.
- For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
- When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
- Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
- Carbide is three times stiffer than steel and is much denser than either steel or titanium.
- Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
- Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
- Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
- Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO 4 Cutter Glass and Tile Drill Set
- 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
- Tungsten Carbide 4 Cutter Glass and Tile Drill Set
- Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
- Fast starting with reduced bit wander.
- Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
- Not suitable for use with toughened or laminated safety glass.
- Use a slow speed with steady but gentle pressure.
- Reduce the pressure at break through.
- For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
- When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
- Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
- Carbide is three times stiffer than steel and is much denser than either steel or titanium.
- Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
- Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
- Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
- Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
(0 reviews) -
ScrewdriversBORDO 41 Piece Standard Screwdriver Insert Bit, Power Bit and Nutsetter Set with Swivel Head Bit Holder and Magnetic Sleeve Insert Bit Holder
- 41 Piece Standard Screwdriver Insert Bit, Power Bit and Nutsetter Set with Swivel Head Bit Holder and Magnetic Sleeve Insert Bit Holder
- Contains a variety of popular Insert Bits, Power Bits and Nutsetters in a tough blow mould case.
Components:
Part Number Quantity 5300-PH0X25 1 5300-PH1GX25 1 5300-PH2GX25 1 5300-PH3GX25 1 5300-PZ2X25 1 5300-HX5X25 1 5300-SR1X25 1 5300-SR2X25 1 5300-SL4X25 1 5300-SL5X25 1 5300-SL6X25 1 5300-TX10X25 1 5300-TX15X25 1 5300-TX20X25 1 5300-TX25X25 1 5300-TX27X25 1 5300-TX30X25 1 5300-TX40X25 1 5400-PH1X50 1 5400-PH2X50 1 5400-PH3X50 1 5400-HX5X50 1 5400-HX6X50 1 5400-SR1X50 1 5400-SR2X50 1 5400-SR3X50 1 5400-SL6X50 1 5400-PH1X100 1 5400-PH2X100 1 5400-PH3X100 1 5400-PZ2X100 1 5400-HX5X100 1 5400-SR1X100 1 5400-SR2X100 1 5400-SR3X100 1 5400-SL6X100 1 5600-NS1/4X65 1 5600-NS5/16X65 1 5600-NS3/8X65 1 5360-SW1/4X75 1 5350-MH1/4SLX80 1 (0 reviews) -
BurrsBORDO 5 Pce #5 Express Cut Burr Set
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews) -
ScrewdriversBORDO 59 Piece Standard Screwdriver Insert Bit, Power Bit and Nutsetter Set with Magnetic Sleeve Insert Bit Holder
- 59 Piece Standard Screwdriver Insert Bit, Power Bit and Nutsetter Set with Magnetic Sleeve Insert Bit Holder
- Contains a variety of popular Insert Bits, Power Bits and Nutsetters in a tough blow mould case.
Components:
Part Number Quantity 5300-PH0X25 1 5300-PH1GX25 1 5300-PH2GX25 1 5300-PH3GX25 1 5300-PZ2X25 1 5300-HX5X25 1 5300-SR1X25 1 5300-SR2X25 1 5300-SL4X25 1 5300-SL5X25 1 5300-SL6X25 1 5300-TX10X25 1 5300-TX15X25 1 5300-TX20X25 1 5300-TX25X25 1 5300-TX27X25 1 5300-TX30X25 1 5300-TX40X25 1 5400-PH1X50 1 5400-PH2X50 1 5400-PH3X50 1 5400-HX5X50 1 5400-HX6X50 1 5400-SR1X50 1 5400-SR2X50 1 5400-SR3X50 1 5400-SL6X50 1 5600-NS1/4X65 1 5600-NS5/16X65 1 5600-NS3/8X65 1 5600-NS7/16×65 1 5300-TX10TRX25 1 5300-TX15TRX25 1 5300-TX20TRX25 1 5300-TX25TRX25 1 5300-TX27TRX25 1 5300-TX30TRX25 1 5300-TX40TRX25 1 5300-TW0X25 1 5300-TW1X25 1 5300-TW2X25 1 5300-TW3X25 1 5300-TW4X25 1 5300-TW5X25 1 5300-IH3/32X25 1 5300-IH1/8X25 1 5300-IH5/32X25 1 5300-IH3/16X25 1 5300-IH7/32X25 1 5300-IH3X25 1 5300-IH4X25 1 5300-IH5X25 1 5300-IH6X25 1 5300-PD4X25 1 5300-PD6X25 1 5300-PD8X25 1 5300-PD10X25 1 5300-TLX25 1 5350-MH1/4SLX80 1 (0 reviews) -
Chemicals, Lubricants & AdhesivesBORDO 5L SlickDTR Drilling, Tapping and Reaming Fluid
- 5L SlickDTR Drilling, Tapping and Reaming Fluid
- SlickDTR is formulated with extreme pressure additives that significantly reduce friction at the cutting edge, extending tool life, increasing performance and producing a superior finish.
- SlickDTR is suitable for use on all metals including hardened steels, titaniums and nimonics.
- Extreme cutting performance.
- Reduces friction for longer tool life.
- Eliminates galling and seizing.
- Improves tool performance.
- Excellent surface finish.
- Extreme pressure performance.
- Aquatically non-toxic.
- Fully biodegradable.
- Derived from renewable resources.
- Safe and easy to use and clean up.
- Australian made from local ingredients.
- Non-irritating.
- No obnoxious fumes.
- Washes off with water.
- Non-flammable.
- Eliminates need for solvent degreasing chemicals and high VOC solvents.
- Very low coefficient of friction.
- Does not contain chlorine, phenols or toxic metals.
(0 reviews) -
BurrsBORDO 8 Pce #10 Express Cut Burr Set
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews) -
BurrsBORDO 8 Pce #11 Express Cut Burr Set
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews) -
BurrsBORDO 8 Pce #4 Express Cut Burr Set
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews) -
BurrsBORDO 8 Pce #6 Express Cut Burr Set
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews) -
Annular Cutters & SetsBORDO 90 Degree 3 Flute HSS Countersink with Universal Shank
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Clean & Strip DiscsBORDO Abrasives Clean & Strip Discs Black
- Silicon carbide impregnated nylon Clean & Strip Discs for removing rust, paint, corrosion from ferrous and non-ferrous metals, wood, fibreglass, brick and stone.
- Silicon carbide and non-woven nylon fibres are bonded together using resin to create these versatile discs.
- Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as preparation prior to painting and general surface cleaning.
- While silicon carbide breaks down faster than aluminium oxide, it produces a superior finish with a sharp, consistent cut without gouging or damaging the surface of the workpiece.
- As the disc wears the resin bonds breaks down gradually revealing new fibres and sharp abrasive, giving a consistent cut over the life of the disc.
- Additionally the open weave of the nylon fibres permits air flow and prevents clogging.
- The sharp-cutting nature of silicon carbide in conjunction with the open web make this product well suited for removing surface coatings, sealants, rust removal, weld cleaning, and paint removal.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Clean & Strip DiscsBORDO Abrasives Clean & Strip Discs Blue
- Silicon carbide impregnated nylon Clean & Strip Discs for removing rust, paint, corrosion from ferrous and non-ferrous metals, wood, fibreglass, brick and stone.
- Silicon carbide and non-woven nylon fibres are bonded together using resin to create these versatile discs.
- Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as preparation prior to painting and general surface cleaning.
- While silicon carbide breaks down faster than aluminium oxide, it produces a superior finish with a sharp, consistent cut without gouging or damaging the surface of the workpiece.
- As the disc wears the resin bonds breaks down gradually revealing new fibres and sharp abrasive, giving a consistent cut over the life of the disc.
- Additionally the open weave of the nylon fibres permits air flow and prevents clogging.
- The sharp-cutting nature of silicon carbide in conjunction with the open web make this product well suited for removing surface coatings, sealants, rust removal, weld cleaning, and paint removal.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Clean & Strip WheelsBORDO Abrasives Clean & Strip Wheels
- Single thickness, 1/4″ hex shank.
- Silicon carbide impregnated nylon Clean & Strip Discs for removing rust, paint, corrosion from ferrous and non-ferrous metals, wood, fibreglass, brick and stone.
- Silicon carbide and non-woven nylon fibres are bonded together using resin to create these versatile discs.
- Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as preparation prior to painting and general surface cleaning.
- While silicon carbide breaks down faster than aluminium oxide, it produces a superior finish with a sharp, consistent cut without gouging or damaging the surface of the workpiece.
- As the disc wears the resin bonds breaks down gradually revealing new fibres and sharp abrasive, giving a consistent cut over the life of the disc.
- Additionally the open weave of the nylon fibres permits air flow and prevents clogging.
- The sharp-cutting nature of silicon carbide in conjunction with the open web make this product well suited for removing surface coatings, sealants, rust removal, weld cleaning, and paint removal.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Flap DiscsBORDO Abrasives Flap Discs
- Zirconia (Zirconium Oxide)
- Flap discs are available in a wide range of sizes and grits and are used for applications including weld seam removal, surface blending, edge grinding and weld preparation on ferrous and non-ferrous metals.
- Their main advantage over other types of abrasives in that they grind and finish in one operation, thereby, reducing both finishing time and finishing costs.
- Flap discs produce very little vibration and noise during use.
- Zirconia is significantly tougher than aluminium oxide abrasives which makes zirconia well suited to high pressure machining and grinding applications.
- Zirconia has a good heat resistance and is commonly used in general steel fabrication for the grinding and finishing of steel, and stainless steel.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Flap WheelsBORDO Abrasives Flap Wheels
- Aluminium Oxide.
- Flap wheels are ideal for stock removal, deburring, cleaning, blending and finishing in a variety of applications, including stainless steel pipe fabrication and stainless steel vessels.
- A flap wheel is an abrasive wheel made from abrasive strips (flaps) radiating from a centre hub.
- Bordo flap wheels come in many different diameters, widths and grits.
- The outside diameter of the wheel can range from 30mm to 80mm.
- Bordo flap wheels use Aluminium Oxide (Al2O3) as the abrasive material which is bonded to the strips of the wheel.
- Aluminium oxide is a fused, hard synthetic crystalline abrasive.
- Within the abrasive compound the Aluminium and Oxygen elements are held very close together causing these two relatively light elements to make a hard, dense crystal.
- On the MOHS scale of hardness Aluminium Oxide is 9.0.
- This hard crystal structure has a tendency to slowly dull or round and is hard to fracture.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutters & SetsBORDO Adaptor 3/4″ Universal Male to 3/4″ Weldon Female
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AdjustableBORDO Adjustable Fractional Reamer
- Bordo Adjustable Reamers are made from premium HSS.
- Precise hole control through adjustable sizing.
- Replaceable blades for maximum tool life.
- With adjustable size control an adjustable hand reamer is designed as a general purpose reamer that can cover a small range of sizes and produce a clean, accurate hole.
- Because there is no spiral in the flutes, hole size is obtained by removing a small amount of material with each cut.
- Progressive cuts of around 0.05mm per pass are required to avoid chatter.
- Adjustable reamers are ideal for light usage in unbroken holes, in plastics and non-ferrous metals.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO Adjustable Hole Cutters
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AdjustableBORDO Adjustable Nut
- Bordo Adjustable Reamers are made from premium HSS.
- Precise hole control through adjustable sizing.
- Replaceable blades for maximum tool life.
- With adjustable size control an adjustable hand reamer is designed as a general purpose reamer that can cover a small range of sizes and produce a clean, accurate hole.
- Because there is no spiral in the flutes, hole size is obtained by removing a small amount of material with each cut.
- Progressive cuts of around 0.05mm per pass are required to avoid chatter.
- Adjustable reamers are ideal for light usage in unbroken holes, in plastics and non-ferrous metals.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AdjustableBORDO Adjustable Pilot
- Bordo Adjustable Reamers are made from premium HSS.
- Precise hole control through adjustable sizing.
- Replaceable blades for maximum tool life.
- With adjustable size control an adjustable hand reamer is designed as a general purpose reamer that can cover a small range of sizes and produce a clean, accurate hole.
- Because there is no spiral in the flutes, hole size is obtained by removing a small amount of material with each cut.
- Progressive cuts of around 0.05mm per pass are required to avoid chatter.
- Adjustable reamers are ideal for light usage in unbroken holes, in plastics and non-ferrous metals.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
