Automotive Supplies
Showing 73–108 of 520 results
-
Air & Power ToolsITM M7 Ratchet Wrench 1/2″ Drive
1/2″ Square Drive Air Ratchet WrenchSquare Drive: 1/2″
Torque Range: 10-55 ft-lb / 13.5-74 Nm
Max Torque at 5 seconds: 100 ft-lb / 135.6 Nm
Free Speed: 160 RPM
Air Requirement: 4 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 280mm
Net Weight: 1.3kg
Sound Pressure: 84dBA
Vibration Level: 4.4m/s²(0 reviews) -
Automotive SuppliesITM Outside Micrometer 0-25mm
Enamelled frame.
Ratchet stop and locking screw.
Carbide tipped measuring faces.
Ratchet thimble.
Durable plastic storage case.- Range: 0 – 25mm
- Graduation: 0.01mm
- Accuracy: +/- 0.04mm
- Jaw reach: 29mm
(0 reviews) -
AccessoriesITM Pilot Pin – To Suit 25mm Depth
A pilot pin serves three main purposes:.
Ejects the slug at the end of the cut.
Provides coolant feed into the centre of the cutter.
Locates the centre of the cutHOLEMAKER PILOT PIN, 6.34MM x 77MM, TO SUIT 25MM DEPTH OF CUT CUTTERS
Diameter: 6.34mm
Annular Cutter Depth of Cut: 25mm
Overall Length: 77mm(0 reviews) -
Accessories
ITM Pilot Pin – To Suit 50mm Depth
A pilot pin serves three main purposes:.
Ejects the slug at the end of the cut.
Provides coolant feed into the centre of the cutter.
Locates the centre of the cutHOLEMAKER PILOT PIN, 6.34MM x 102MM, TO SUIT 50MM DEPTH OF CUT CUTTERS
Diameter: 6.34mm
Annular Cutter Depth of Cut: 50mm
Overall Length: 102mm(0 reviews) -
MeasuringITM Precision Engineers Square
Blade Length: 150mm
Stock Length: 100mm
Code: SS/A/6
Straightness of blade edges: 0.00031 inch / 8 microns
Flatness of working faces of stock: 0.00023 inch / 6 microns
Parallelism of working faces of stock: 0.0002 inch / 5 microns(0 reviews) -
Automotive SuppliesITM Vernier Calipers
Metric and imperial measurements.
Manufactured from hardened stainless steel.
Convenient thumb screw locking mechanism.
Suitable for inside, outside, depth and step measurements.
Durable plastic storage case.
Graduation: 1mm intervals.
Lower resolution: 0.05mm.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Accessories & PartsITM Worksharp Benchtop Precision Knife Sharpener
The Precision Adjust Knife Sharpener is an angle adjustable, three abrasive grit, knife sharpening system that delivers precision and repeatability. Sharpening angle can be easily adjusted from 15° to 30° in 1° increments to sharpen every knife you own. Tri-Brasive™ includes coarse 320 and fine 600 grit diamond plates to quickly restore a sharp edge, and a fine grit ceramic stone to hone an incredibly keen edge on any knife. Innovative clamp design quickly and safely secures the knife. Sharpening base provides a stable platform for benchtop sharpening.
Angles: 15° to 30°.
Abrasives: Coarse diamond, fine diamond, fine ceramic.(0 reviews) -
AccessoriesKLEIN TOOLS Canvas Tool Bags
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AccessoriesKLEIN TOOLS Canvas Tool Pouches
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AccessoriesKLEIN TOOLS Vinyl Tool Bags
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AccessoriesKLEINS TOOLS Zippered Tool Bags
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Alligator
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx.61 HRC: high wear resistance and stable gripping
- Box-joint design: high stability due to double guide
- Robust construction, insensitive to dirt- particularly suitable for outdoor work
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Alligator XL
- The classic model, now also in 400 mm length
- Robust construction, insensitive to dirt- particularly suitable for outdoor work
- Good access to the workpiece due to slim size of head and joint area
- Guard prevents operators’ fingers being pinched
- Gripping surfaces with special hardened teeth, teeth hardness approx.61 HRC: high wear resistance and stable gripping
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Box-joint design: high stability due to double guide
- Robust adjustment mechanism, insensitive to dirt, easy to clean- particularly suitable for outdoor work.11-notch adjustment positioning with a gripping capacity up to 3 1/2″, optimised adjustment to the workpiece and user-friendly handle position
- Chrome vanadium electric steel, forged, oil-hardened
(0 reviews) -
Hand ToolsKNIPEX Assembly Pliers
- Specially suitable for gripping and assembly work with a higer prehensile power
- Knurled gripping surfaces
- High-grade special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Aviation Plier Wrench
- High pressing strength: hand’s power is increased by 10 times
- Fast adjustment by pushing a button directly onto work piece
- No unintentional adjustment and no slipping of joint
- Plier and spanner in one tool
- Chrome plated
- 250mm
- Chrome vanadium electric steel, forged, oil-hardened
- Transversal cutting edge for confined areas
- Unique multi-grip style plier designed specifically for aviation applications
- Suitable for forcing off aluminium break-away nuts (collars) e.g on Hi-Lok® screw fasteners (not suitable for steel or titanium collars)
- Ideal for general, gripping, holding, pressing and bending
- 86 05 250 S4 – Cutting edge angled at 45° for better accessibility
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Bolt Cutters
- Cutting capacity up to 48 HRC hardness
- Robust cutting edges are additionally induction hardened, cutting-edge hardness approx.62 HRC
- Forged-in stopper with comfortable shock- absorber
- Good access due to very flat construction of head and joint area
- Ergonomically angled handles to minimise effort
- Sturdy non-slip two-colour dual component handle sleeves
- Precise adjustment (12 positions) by eccentric bolt
- High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio
- Bolted cutter head, replaceable
- Blade: chrome vanadium heavy-duty steel, forged, oil-hardened
- Joint: special tool steel, forged
- Handles: steel tube, powder-coated
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Bolt End Cutting Nippers
- Powerful, compact, comfortable
- Compared to conventional lever-assisted end cutting nippers, greater cutting capacity, less effort required and better handling
- For all wire classes including piano wire
- Exceptionald cutting capacity due to high-leverage joint
- Cutting edges additionally induction hardened, cutting edge hardness approx.64 HRC
- Vanadium electric steel- forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Bowden Cable Cutter
- For Bowden cables and soft wire rope up to 3.0 mm dia.(also V2A)
- Smooth and clean cutting due to special shape of the cutting edges
- Sickle shape cutting edges surround the material and prevent the wire rope fanning out
- Little handforce required due to very high transmission ratio
- With opening spring and locking device
- Cutting edges additionally induction hardened
- High-grade special tool steel, forged, oil-hardened
- With opening spring and locking device
- Little handforce required due to very high transmission ratio
- Cutting edges additionally induction hardened
- For Bowden cables and soft wire rope up to 3.0 mm dia.(also V2A)
- Smooth and clean cutting due to special shape of the cutting edges
- Sickle shape cutting edges surround the material and prevent the wire rope fanning out
(0 reviews) -
Hand ToolsKNIPEX Cable Cutter – Ratchet Action
- For cutting copper and aluminium single conductors as well as multiple stranded cables
- Not suitable for steel wire and wire ropes
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- One-hand operation using ratchet principle
- Little handforce required due to very high transmission ratio
- Two-stage ratchet drive for easy cutting
- Simple handling as a result of low weight and compact design – can be used even in confined areas
- Guard prevents operators’ fingers being pinched
- High-grade special tool steel, forged, oil-hardened
- Fixed handle with support area for putting down the pliers when cutting
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Cutter – Telescopic Handles
- For copper and aluminium single conductors as well as multiple stranded cables – also with hard rubber or plastic sheath
- Not suitable for steel wire and wire ropes
- Also suitable for cables with iron sheath reinforcement
- Little hand force required for cutting due to optimum transmission ratio
- High cutting capacity due to two-hand operation and ratchet action
- The blade can be opened in any cutting position
- Handle length with multiple position adjustment from 400 – 610 mm (short transport length, individual adaptation to working conditions)
- Blade: special-quality high-grade tool steel, oil-hardened
- Handles: high-strength oval aluminium tubing
- Tool length: 600 – 810 mm
- Weight only approx.3820 g
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Shears
- For cutting copper and aluminium single conductors as well as multiple stranded cables
- Not suitable for steel wire and hard drawn copper conductors
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- Easy cutting with one-hand operation
- Guard prevents operators’ fingers being pinched
- Adjustable bolted joint, self-retaining screw
- High-grade special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Shears – Surgical Steel
- Not suitable for steel wire and hard drawn copper conductors
- Precision ground, hardened blades
- No crushing, slight deformation of the cable only
- Guard prevents operators’ fingers being pinched
- Adjustable bolted joint
- Shears body: surgical steel, stainless, vaccum-hardened
- Handles: plastic, impact-proof
- With opening spring and locking device
- Blades made of stainless steel
- Oil-hardened and tempered
- Cuts cables up to 10 mm dia./ 24 mm²
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Shears – Telescopic Handles
- Cable shears with adjustable telescopic handles allowing angular positioning
- For cable diameters up to 38 mm, handles can be positioned at an angle to set the optimum handle width, which makes the shear also suitable for work in confined areas
- Comfortable work thanks to ratchet action and low weight
- Heavy duty telescopic handles made of oval aluminium tubing- extendable up to 770 mm for maximum leverage on large cable diameters- retractable down to 570 mm for minimum space requirements during transport
- Replaceable cutting head
- Extensive cutting range up to max.38 mm or max.280 mm² (e.g.4 x 70 mm² NYY) in copper and aluminium cables
- Easier, neater cut due to optimised cutting-edge geometry
- Adjustable bolted joint
- Cutting head: special quality high-grade tool steel, oil-hardened
- Handles: high-strength oval aluminium tubing
(0 reviews) -
Hand ToolsKNIPEX Cable Shears – Tubular Handle
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cable Shears – Twin Cutting Edge
- For cutting copper and aluminium cables
- Not suitable for steel wire and hard drawn copper conductors
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- By dividing the cutting actions into initial cut (insulating sheath in the front cutting area) and final cut (conductor in the back cutting area), cables up to20 mm can be cut in one-hand operation
- Less effort required due to favourable lever ratio and optimised cutting-edge geometry
- Guard prevents operators’ fingers being pinched
- Adjustable bolted joint, self-retaining screw
- High-grade special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Carpenters’ Pinchers
- For heaviest duty
- Specially favoured by craftsmen for their precise workmanship
- Extreme wear resistance and well balanced
- Cutting edges additionally hardened- cutting edge hardness approx.60 HRC
- Special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Centre Cutters
- 250mm
- With integrated forged axle for heaviest duty
- With precision cutting edges for soft, hard and piano wire
- Cuts thick wires with less effort than other diagonal cutters of the same length
- Centric precision cutting edges
- High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio
- Cutting edges additionally induction hardened, cutting edge hardness approx.64 HRC
- Chrome vanadium heavy-duty steel, forged, oil-hardened
(0 reviews) -
Hand ToolsKNIPEX Circlip Pliers – External
- For fitting circlips on shafts, range of application from 3 – 140 mm dia
- Solid style, forged
- Non-slip, solid tips
- Pliers body and tips: chrome vanadium steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Circlip Pliers – Large External Circlips
- For assembling circlips on shafts within the range of122 – 400 mm
- With locking device, can be released
- With replaceable tips made of tempered steel
- Black powder coated
- Pliers body: rolled steel, high-strength
- Tips: special tool steel, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Circlip Pliers – Large Internal Circlips
- For assembling circlips into bores within the range of122 – 400 mm
- With locking device, can be released
- With replaceable tips made of tempered steel
- Black powder coated
- Pliers body: rolled steel, high-strength
- Tips: special tool steel, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Circlip Pliers for Grip Rings
- For fitting grip rings on shafts from 1.5 – 30 mm dia
- With opening spring
- Solid style, forged
- Non-slip, solid tips
- Pliers body and tips: chrome vanadium steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Circlip Pliers for Internal Circlips
- For fitting circlips into bores, range of application from 8 – 140 mm dia
- Solid style, forged
- Non-slip, solid tips
- Pliers body and tips: chrome vanadium steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cobalt Compact Bolt Cutters
- 200mm
- Precision cutting edges for soft and hard wire as well as piano wire
- Cuts bolts, nails, rivets, etc.up to 5.2 mm dia
- Most efficient joint design ensures exceptional cutting performance
- Cutting edges additionally induction hardened, cutting edge hardness approx.64 HRC
- Chrome vanadium heavy-duty steel, forged, oil-hardened
- Improved cutting performance
- Micro-structured cutting edge allows easy cutting of large cross-sections
- With gripping surface below the joint for gripping and pulling wires with a diameter as from 1.0 mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hand ToolsKNIPEX Cobalt XL Compact Bolt Cutters
- The compact bolt cutters from KNIPEX now available in 250 mm length for one and two hand operation
- Up to a 40-fold increase of manual force
- For powerful cutting of larger cross-sections as well as very hard materials
- Two-hand operation for maximum cutting force
- 60 % less effort required compared to high leverage diagonal cutters of the same size: 40-fold increase of manual force due to special joint design
- with a gripping surface below the joint for gripping and pulling wires with a diameter from 1.0 mm
- induction-hardened precision blades: cutting edge hardness approx. 64 HRC
- Chrome vanadium heavy-duty
(0 reviews) -
Hand ToolsKNIPEX Cobolt S Compact Bolt Cutters
- Compact and powerful: cuts bolts, nails, and rivets etc up to a diameter of 4.4mmØ
- At only 160mm in length, the Cobolt S is the perfect tool to fit into tight areas and carry in your pocket wherever you go
- Compact and powerful: cuts bolts, nails, rivets etc. up to a diameter of 4.4 mm
- Heavy duty, induction hardened cutting edge for thin, hard wire, screws and springs. Cutting edge hardness approx. 64HRC
- Less physical effort due to efficient lever action mechanism
- No slipping of the material to be cut due to lasered cutting edge
- With gripping surface below the joint for gripping and pulling wires with a diameter from as Ø 1.0 mm
- Chrome vanadium heavy-duty steel, forged, multi stage oil-hardened
(0 reviews) -
Hand ToolsKNIPEX Cobra
- Push the button for adjustment on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping
- Box-joint design: high stability due to double guide
- Reliable catching of the hinge bolt: no unintentional shifting
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, oil hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page