Additional information
| Size/Container | 240g Aerosol |
|---|
CHEMTOOLS ChemTig™ Prep-Solv Metal Cleaner & Degreaser
ChemTig™ Prep-Solv Metal Cleaner & Degreaser
ChemTig™ Prep-Solv Metal Cleaner & Degreaser is a blend of fast drying aliphatic solvents, formulated to effectively penetrate and dissolve a diverse range of oils, coolants, greases, and waxes. It is compatible with most metals and alloys, including steel, stainless steel, aluminium, and copper.
Prep-Solv leaves no visible residues and can be used to wipe away finger prints, machine oil, and greases prior to welding. It will also remove any remaining anti-spatter residue from metal surfaces prior to painting or powder coating.
This product contains no CFCs or chlorinated solvents.
Related products
-
Chemicals, Lubricants & AdhesivesSIKA Sika® Filler-101
Ready to use water based fine surface and joint fillerSika® Filler-101 is a water based, ready to use joint filling and wide spreading of internal surfaces
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Sika® Filler-101 is suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
- Sika® Filler-101 has a very smooth finish
- Sika® Filler-101 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
Advantages
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Quick drying
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Filler-105
Ready to use water based thick layer surface fillerSika® Filler-105 is a water based, ready to use thick layer surface filler for internal surfaces.
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- Sika® Filler-105 is suitable for indoor filling and repair where thicker filling capability are needed
- A finer grade filler such as Sika® Filler-101 should be used for finishing surfaces before painting
- Sika® Filler-105 complies with EN 15824 “Specifications for external and internal plasters based on organic binders”
Advantages
- Ready to use, no mixing required
- Easy application
- Thick layer filling and levelling ability
- High initial tack or grab on plaster and concrete
- Quick drying
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika Boom® G
Highly expansive, gun applied polyurethane fixing foamSika Boom® G is a one-component, fast curing, gun applied polyurethane foam with a very high expansion rate.
- One-Component
- Easy application with application gun
- High expansion rate
Sika Boom® G is designed for fixing, insulating and filling connection joints around window and door frames, air-conditioning vents and roller blind housings.
Sika Boom® G allows insulation against noise, cold and draughts after a single application.Advantages
- One-Component
- Easy application with application gun
- High expansion rate
- Fast curing
- Very good thermal insulation
- Effective sound dampening
- HFC-free
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA SikaSeal® Roof & Gutter
1-component neutral cure roof and gutter silicone sealantSikaSeal® Roof & Gutter is a one-component, neutral curing, low odour silicone sealant with excellent adhesion to most construction surfaces.
SikaSeal® Roof & Gutter cures through the absorption of atmospheric moisture to give a tough but flexible waterproof seal.- Neutral cure
- Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
- Non-sag
- Roofs
- Gutters
- Polycarbonate roof sheeting
- Around plumbing fixtures and penetrations
- General interior & exterior sealing around the home
Advantages
- Neutral cure
- Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
- Non-sag
- Great tooling characteristics
- Interior and exterior usage
- Fast curing
- Minimum movement capability ±25%
- High temperature resistance (-40°c to +150°c)
(0 reviews)