[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

DYMAXION Core Drilling Machine 2200 Watt Rig Mounted 3 Speed 1.1/4 UNC Spindle

  • Maximum 250mm diameter core drill in reinforced concrete.
  • Built in bubble level, water swivel and RCD protection.
  • Heavy duty machine suitable for coring through rebar and mesh embedded concrete.
  • Designed for the toughest coring operations thick concrete over 300mm thick.
  • Angle adjustment.
  • Die cast aluminium base and extruded aluminium mast.
  • Base includes wheels.
  • Four levelling bolts are widely spaced for maximum stability.
  • Fitted with stabilising back stays.
  • Four nylon guide wheels firmly secure the machine bracket to the mast and allow for smooth travel.

In Stock
SKU: AGCDM250 Categories: ,

Related products

  • Drill Bits & Sets

    BORDO HSS Power-Bore Auger Bit
    • HSS Power-Bore self feeding auger drill.
    • The Bordo range of Power-Bore HSS split point auger bits outperform conventional augers in tough Australian hardwood.
    • Hex shank eliminates chuck slip.
    • Self feeding HSS threaded split point.
    • Outperforms and outlasts conventional augers.
    • Extreme performance in tough Australian hardwoods.
    • Heavy duty construction for long life – guaranteed!
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Drill Bits & Sets

    BORDO Scotch Pattern Auger Bit 610mm
    • Long Scotch Pattern Auger Bit High Carbon Steel.
    • Heavy duty two flute auger bits are extremely efficient cutting – perfect for Australian soft and hard woods.
    • Wide flutes provide rapid chip evacuation with a heavy duty worm point that resists breakage.
    • Unlikely to deviate due to grain or imperfections in the timber (such as knots).
    • Heavy duty milled flute design.
    • Hardened cutting edge for long life in hard timber.
    • Fully-forged bit for maximum durability.
    • Resharpenable.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Drill Bits & Sets

    BORDO 4 Cutter Glass and Tile Drill Set
    • 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
    • Tungsten Carbide 4 Cutter Glass and Tile Drill Set
    • Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
    • Fast starting with reduced bit wander.
    • Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
    • Not suitable for use with toughened or laminated safety glass.
    • Use a slow speed with steady but gentle pressure.
    • Reduce the pressure at break through.
    • For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
    • When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
    • Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
    • Carbide is three times stiffer than steel and is much denser than either steel or titanium.
    • Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
    • Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
    • Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
    • Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
    (0 reviews)
    Add to Quote
  • Drill Bits & Sets

    BORDO 4 Cutter Glass and Tile Drill Hex Shank
    • Tungsten Carbide 4 Cutter Glass and Tile Drill
    • Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
    • Fast starting with reduced bit wander.
    • Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
    • Not suitable for use with toughened or laminated safety glass.
    • Use a slow speed with steady but gentle pressure.
    • Reduce the pressure at break through.
    • For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
    • When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
    • Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
    • Carbide is three times stiffer than steel and is much denser than either steel or titanium.
    • Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
    • Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
    • Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
    • Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page