[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

DYMAXION Diamond Saw Blades Diamond Cup grinding wheels

  • Diamond Cup Wheel Turbo.
  • For light grinding, shaping and finishing in concrete, stone and general masonry.
  • Improved cooling for increased cup life.
  • 100, 115, 125 & 180mm diameters.
  • Ideal for removing formwork seams and imperfections in concrete and stone.

In Stock
SKU: N/A Categories: ,

Additional information

Size

100mm, 115mm, 125mm, 180mm, 200mm, 230mm, 300mm, 350mm

Related products

  • Cutting Wheels

    DYMAXION Diamond Saw Blades Turbo Rim for porcelain and granite
    • Turbo blades typically have soft to medium bonds for a variety of general purpose to specific cutting applications.
    • Turbo blades feature a continuous rim with an edge that is serrated.
    • This serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
    • Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
    • The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
    • Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
    • If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
    • If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
    • Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
    • The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
    • The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Grinding Wheels

    DYMAXION Grinding Disc Ferrous and Stainless Steels
    • Suitable for grinding ferrous and stainless steels (inox).
    • High grinding performance.
    • High stock removal rates even at low pressure due to long tool life.
    • Do not exceed maximum safe speed of 80m/s.
    • Complies with DIN EN 12413 European standard and AS1788.1-1987 Australian standard.
    • Grinding disc must be mounted correctly as per machine manufacturer’s specifications.
    • Metal guards must be fitted and used on all machines.
    • If grinding disc is chipped,cracked or damaged it must not be used, and needs to be replaced.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Cutting Wheels

    DYMAXION Diamond Saw Blades Trenching and Chasing blades
    • Rapid brick and mortar removal when trenching for electrical or plumbing applications.
    • Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
    • Use when trenching or wall chasing in clay brick.
    • Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
    • The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
    • Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
    • If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
    • If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
    • Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
    • The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
    • The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Tool Accessories

    MILWAUKEE CARBIDE ABRASIVE WHEEL

    The Milwaukee® 49943005 is a 76mm x 1mm x 10mm (3” x .040″ x 3/8”) cut-off wheel. Intended to be a general-purpose wheel when paired with the Milwaukee M12 FUEL™ Cut-Off Tool (M12FCOT-0), this wheel is a unique solution that delivers the capability to cut a wide range of materials quickly and efficiently. Whether it’s drywall, cement backer board, PVC, plastics, etc., carbide abrasive wheels are suitable for the task when used with the M12 FUEL™ Cut-Off Tool (M12FCOT-0).

    (0 reviews)
    Add to Quote