[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

BORDO Radius Cylinder + End Cut

  • 1/2″ Radius Burr – Cylinder with Endcut
  • Unique design transforms the conventional cylinder burr.
  • Stronger flute geometry – increases productivity.
  • Unique design – Facilitates the blending operation between two surfaces.
  • Prevents stress on the work piece at the intersection point on the component.
  • CNC Machined – high consistent quality.
  • Manufactured from high quality sintered tungsten carbide – guaranteed high performance and durability.
  • Manufactured to strict quality control standards – Incorporates 100% inspection of brazed joints.
  • Suitable for use on a wide range of metals, alloys and other materials including titanium, bronze, stainless steel, cast iron and brass.

In Stock
SKU: 6400-37349 Categories: ,

Related products

  • Burrs

    BORDO E-Z Chamfer Hex Shank De-Burring & Chamfering Tool
    • 18-38mm E-Z Chamfer hex shank de-burring and chamfering tool
    • 18-38mm (23/32-1.1/2″) capacity.
    • E-Z Chamfer efficiently removes burrs and ridges from bolts, pipe, threaded rod, bar and dowels. It is suitable for use on metals including mild and hardened steels, stainless steel, copper and brass, as well as timber, fibreglass and plastics.
    • E-Z Chamfer prevents sparks and burns. When used correctly at low RPMs the tool will not overheat the workpiece. Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die.
    • Unique patented design!
    • World first M2-HSS Chamfer Tool!
    • Heavy duty single piece construction!
    • Suitable for use on ferrous and non-ferrous metals including MILD STEEL – U.S. Grade 2 – Metric Grade 4.8
    • Suitable for use on ferrous and non-ferrous metals including HARD STEEL – U.S. Grade 5 – Metric Grade 8.8
    • Suitable for use on ferrous and non-ferrous metals including VERY HARD STEEL – U.S. Grade 8 – Metric Grade 10.9
    • Suitable for use on ferrous and non-ferrous metals including STAINLESS STEEL – 300 Series
    (0 reviews)
    Add to Quote
  • Burrs

    BORDO Express Cut Cylindrical Ball Nose 1/4″ Shank Diameter
    • Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
    • Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
    • Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
    • Harder materials require slower running speeds.
    • Smaller burrs require faster running speeds.
    • Long shank burrs require slower speeds for safety reasons.
    • Apply constant movement and light pressure when using the burr.
    • Running below the optimum speed will cause chipping.
    • Running above optimum speed will cause premature tooth wear.
    • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
    • Using tools and collets which have become worn will cause chipping.
    • Do not sink the burr for more than one third of its periphery.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Burrs

    BORDO Express Cut Ball 1/4″ Shank Diameter
    • Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
    • Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
    • Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
    • Harder materials require slower running speeds.
    • Smaller burrs require faster running speeds.
    • Long shank burrs require slower speeds for safety reasons.
    • Apply constant movement and light pressure when using the burr.
    • Running below the optimum speed will cause chipping.
    • Running above optimum speed will cause premature tooth wear.
    • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
    • Using tools and collets which have become worn will cause chipping.
    • Do not sink the burr for more than one third of its periphery.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Burrs

    BORDO Express Cut Cylindrical with End Cut 1/4″ Shank Diameter
    • 6.35mm (1/4″) Shank.
    • Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
    • Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
    • Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
    • Harder materials require slower running speeds.
    • Smaller burrs require faster running speeds.
    • Long shank burrs require slower speeds for safety reasons.
    • Apply constant movement and light pressure when using the burr.
    • Running below the optimum speed will cause chipping.
    • Running above optimum speed will cause premature tooth wear.
    • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
    • Using tools and collets which have become worn will cause chipping.
    • Do not sink the burr for more than one third of its periphery.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page