[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

BORDO Non-Ferrous Cut Cylindrical Ball Nose 1/4″ Shank Diameter

  • SC-1 Non-ferrous cut tungsten carbide burr.
  • Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
  • Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
  • Harder materials require slower running speeds.
  • Smaller burrs require faster running speeds.
  • Long shank burrs require slower speeds for safety reasons.
  • Apply constant movement and light pressure when using the burr.
  • Running below the optimum speed will cause chipping.
  • Running above optimum speed will cause premature tooth wear.
  • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
  • Using tools and collets which have become worn will cause chipping.
  • Do not sink the burr for more than one third of its periphery.

In Stock
SKU: N/A Categories: ,

Additional information

Size

1/4", 3/8", 1/2", 5/8", 3/4"

Related products

  • Burrs

    BORDO Express Cut Tree Radius Nose 1/8″ Shank Diameter
    • Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
    • Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
    • Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
    • Harder materials require slower running speeds.
    • Smaller burrs require faster running speeds.
    • Long shank burrs require slower speeds for safety reasons.
    • Apply constant movement and light pressure when using the burr.
    • Running below the optimum speed will cause chipping.
    • Running above optimum speed will cause premature tooth wear.
    • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
    • Using tools and collets which have become worn will cause chipping.
    • Do not sink the burr for more than one third of its periphery.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Burrs

    BORDO Express Cut Oval 1/4″ Shank Diameter
    • Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
    • Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
    • Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
    • Harder materials require slower running speeds.
    • Smaller burrs require faster running speeds.
    • Long shank burrs require slower speeds for safety reasons.
    • Apply constant movement and light pressure when using the burr.
    • Running below the optimum speed will cause chipping.
    • Running above optimum speed will cause premature tooth wear.
    • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
    • Using tools and collets which have become worn will cause chipping.
    • Do not sink the burr for more than one third of its periphery.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Burrs

    BORDO Express Cut Included Angle 1/8″ Shank Diameter
    • Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
    • Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
    • Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
    • Harder materials require slower running speeds.
    • Smaller burrs require faster running speeds.
    • Long shank burrs require slower speeds for safety reasons.
    • Apply constant movement and light pressure when using the burr.
    • Running below the optimum speed will cause chipping.
    • Running above optimum speed will cause premature tooth wear.
    • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
    • Using tools and collets which have become worn will cause chipping.
    • Do not sink the burr for more than one third of its periphery.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Burrs

    BORDO Express Cut Included Angle Long 1/4″ Shank Diameter
    • Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
    • Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
    • Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
    • Harder materials require slower running speeds.
    • Smaller burrs require faster running speeds.
    • Long shank burrs require slower speeds for safety reasons.
    • Apply constant movement and light pressure when using the burr.
    • Running below the optimum speed will cause chipping.
    • Running above optimum speed will cause premature tooth wear.
    • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
    • Using tools and collets which have become worn will cause chipping.
    • Do not sink the burr for more than one third of its periphery.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page