[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

BORDO HSS Co5 Bright Single Flute 90° Countersink Set

  • 5 Pce 10-30mm 90 Degree HSS Co5 Single Flute Countersink Set
  • Single flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
  • The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
  • This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
  • Use on light to medium materials.
  • Resharpenable.
  • M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
  • This increases tool life in all production applications.

In Stock
SKU: 3842-S Categories: ,

Related products

  • Countersink

    BORDO HSS Co5 Bright Cross Hole 90° Countersink Set
    • 5 Pce 10-30mm 90 Degree HSS Co5 Cross Hole Countersink Set
    • Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
    • The intersection of the hole and cone form the cutting edge on the tool.
    • The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
    • If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
    • This clearance is referred to as cutting relief.
    • The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
    • These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
    (0 reviews)
    Add to Quote
  • Countersink

    BORDO HSS Co5 TiN Coated Single Flute 90° Countersink Set
    • 5 Pc 10-30mm 90 Degree TiN Coated Single Flute Countersink Set
    • Single flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
    • The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
    • This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
    • Use on light to medium materials.
    • Resharpenable.
    • M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
    • This increases tool life in all production applications.
    • Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
    • This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
    • This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
    • As with all surface coated tools, performance will deteriorate after resharpening
    (0 reviews)
    Add to Quote
  • Countersink

    BORDO HSS Co5 TiN Coated Cross Hole 90° Countersink Set
    • 5 Pc 10-30mm 90 Degree TiN Coated Cross Hole Countersink Set
    • Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
    • The intersection of the hole and cone form the cutting edge on the tool.
    • The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
    • If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
    • This clearance is referred to as cutting relief.
    • The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
    • These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
    • Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
    • This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
    • This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
    • As with all surface coated tools, performance will deteriorate after resharpening.
    (0 reviews)
    Add to Quote
  • Countersink

    BORDO HSS Co5 Bright Cross Hole 60° Countersink Set
    • 5 Pce 10-30mm 60 Degree HSS Co5 Cross Hole Countersink Set
    • Cross hole countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
    • The intersection of the hole and cone form the cutting edge on the tool.
    • The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
    • If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
    • This clearance is referred to as cutting relief.
    • The radially relieved single cutting edge provide fast stock removal with low vibration for chatter- free operation ensuring the smoothest finish.
    • These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
    (0 reviews)
    Add to Quote