Additional information
| Size | 24mm, 25mm |
|---|
BORDO SDS Max DELTABIT 380mm
- The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications.
- Deltabits offer specific advantages over standard SDS masonry bits.
- Three edge cutter provides high durability and improved drilling speed.
- Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
- Eliminates rifling – drilling holes close to perfect roundness.
- Extremely round holes result in improved fastener performance by increasing pull out loads.
- More accurate hole starting without bit walk.
- Limited circumferential wear.
- Drills through reinforcing mesh and reinforcing bar.
- Minimised bit binding against reinforcing bar – increasing operator safety.
- Easily drills through all typical steel decking plate including Bondek®.
- Reduced vibration minimising operator fatigue.
- Extremely hard wearing for long tool life.
- Triple fluted for improved dust extraction.
- Asymmetrical five cutter head on a select range of sizes in SDS Max.
Related products
-
Drill Bits/SetsBORDO TCT Ceramic Tile Drill Set
- 5-8mm 5 Pce TCT Ceramic Tile Drill Set
- Extreme Performance Multi-Facet Tungsten Carbide Tipped Ceramic Tile Drill.
- These Rotary Only ceramic tile drills provide outstanding performance and extended tool life in hard ceramic materials.
- Unique cutting edge geometry in conjunction with high temperature brazing to ensure reliable and accurate drilling in multiple hole applications.
- Use of water cooling will extend bit life.
- Although these drill bits are not recommended for drilling vitrified porcelain, their superior multi-facet tungsten carbide tip enables them to drill most materials of this type, albeit with a reduced tool life.
- These ceramic tile drills can also be used to successfully drill in brick, concrete and other masonry materials.
(0 reviews) -
Drill Bits/SetsBORDO Ship Auger Bits 190mm
- Ship Auger.
- Bordo Ship Augers are single twist bits, easily recognised by their lack of a central core.
- The ship head features a single cutter with a coarse screw.
- Their open pattern allows for the efficient evacuation of shavings and makes them ideal for deep hole applications.
- The absence of cutting spurs (or lips) makes them less susceptible to deviation due to grain and imperfections making them the preferred option for timber with a strong grain.
- Hardened cutting edge for long life in hard timber, including nail-embedded wood.
- Ideal for deep hole applications.
- Fully-forged bit for maximum durability.
- Resharpenable.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsBORDO Quick Change Extensions
- 1/4″ x 75mm Standard Magnetic Bit Holder – Clam
- The Bordo range of magnetic bit holders feature powerful magnets.
- Suitable for use with all 1/4″ 25mm insert bits.
(0 reviews) -
Drill Bits/SetsBORDO 4 Cutter Glass and Tile Drill Hex Shank
- Tungsten Carbide 4 Cutter Glass and Tile Drill
- Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
- Fast starting with reduced bit wander.
- Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
- Not suitable for use with toughened or laminated safety glass.
- Use a slow speed with steady but gentle pressure.
- Reduce the pressure at break through.
- For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
- When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
- Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
- Carbide is three times stiffer than steel and is much denser than either steel or titanium.
- Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
- Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
- Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
- Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page