[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

BORDO SDS Plus X-BIT 160mm

  • Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits.
  • Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X-Bit.
  • The single piece* 4 edge tungsten carbide head offers extreme toughness and wear resistance drilling with exceptionally low vibration.
  • The precision cutting facets create dimensionally accurate holes for improved anchor performance.
  • Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing.
  • Hole positioning is simplified with the self-centering drill tip reducing bit wander.
  • Four flute geometry ensures efficient dust removal while retaining a solid engineered heavy duty core the length of the drill to prevent bending and breakage.
  • Suitable for use in: Concrete, High MPA Concrete, Hard Aggregate, Masonry, Hard Stone and Brick.
  • * X-Bits with a diameter greater than 12mm utilise a conventional three piece tungsten carbide arrangement.

In Stock
SKU: N/A Categories: ,

Additional information

Size

5mm, 5.5mm, 6mm, 6.5mm, 8mm, 10mm, 12mm

Related products

  • Drill Bits/Sets

    BORDO HSS Power-Bore Auger Bit
    • HSS Power-Bore self feeding auger drill.
    • The Bordo range of Power-Bore HSS split point auger bits outperform conventional augers in tough Australian hardwood.
    • Hex shank eliminates chuck slip.
    • Self feeding HSS threaded split point.
    • Outperforms and outlasts conventional augers.
    • Extreme performance in tough Australian hardwoods.
    • Heavy duty construction for long life – guaranteed!
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Drill Bits/Sets

    BORDO Solid Core Extensions
    • 1/4″ x 75mm Standard Magnetic Bit Holder – Clam
    • The Bordo range of magnetic bit holders feature powerful magnets.
    • Suitable for use with all 1/4″ 25mm insert bits.
    (0 reviews)
    Add to Quote
  • Drill Bits/Sets

    BORDO 4 Cutter Glass and Tile Drill Hex Shank
    • Tungsten Carbide 4 Cutter Glass and Tile Drill
    • Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
    • Fast starting with reduced bit wander.
    • Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
    • Not suitable for use with toughened or laminated safety glass.
    • Use a slow speed with steady but gentle pressure.
    • Reduce the pressure at break through.
    • For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
    • When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
    • Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
    • Carbide is three times stiffer than steel and is much denser than either steel or titanium.
    • Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
    • Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
    • Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
    • Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Drill Bits/Sets

    BORDO Self Feeding Wood Bit Grub Screw
    • Self Feeding Wood Bit Grub Screw.
    • The Bordo range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications.
    • 7/16″ hex shanks to suit drills with 1/2″ (or larger) chuck.
    • Precision milled shank which eliminates wobble and runout.
    • Spurs on the outside diameter cut holes cleanly and accurately.
    • Dual inside cutting planes shave hole radius for clean, smooth holes without pressure.
    • Fored in one piece from high carbon steel for maximum strength under the toughest drilling conditions.
    (0 reviews)
    Add to Quote