Additional information
| Size | 3.5 x 265mm, 4 x 280mm, 4.5 x 295mm, 5 x 315mm, 5.5 x 330mm, 6 x 330mm, 6.5 x 350mm, 7 x 370mm, 7.5 x 370mm, 8 x 390mm, 8.5 x 390mm, 9 x 410mm, 9.5 x 410mm, 10 x 430mm |
|---|
BORDO Extra Deep Hole HSS-Co5 Metric Series 3
- HSS-Co5 (Cobalt) Extra Deep Hole Drills
- DIN1869
- HSS-Co5 (Cobalt), 130° UX Point, 40° Helix Parabolic.
- Cobalt HSS drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
Related products
-
Drill Bits/SetsBORDO 4 Cutter Glass and Tile Drill Set
- 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
- Tungsten Carbide 4 Cutter Glass and Tile Drill Set
- Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
- Fast starting with reduced bit wander.
- Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
- Not suitable for use with toughened or laminated safety glass.
- Use a slow speed with steady but gentle pressure.
- Reduce the pressure at break through.
- For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
- When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
- Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
- Carbide is three times stiffer than steel and is much denser than either steel or titanium.
- Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
- Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
- Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
- Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
(0 reviews) -
Drill Bits/SetsSUTTON Jobber Drill Sets – TiNite
Sutton Tools TiNite® jobber drills are for high performance drilling. Lasts up to 6 times longer than standard HSS drill bits. For drilling metal & tougher alloy steels such as steel, stainless steel, copper, brass, aluminium & cast iron.
(0 reviews) -
Drill Bits/SetsBORDO Scotch Pattern Auger Bit 305mm
- Scotch Pattern Auger Bit High Carbon Steel.
- Heavy duty two flute auger bits are extremely efficient cutting – perfect for Australian soft and hard woods.
- Wide flutes provide rapid chip evacuation with a heavy duty worm point that resists breakage.
- Unlikely to deviate due to grain or imperfections in the timber (such as knots).
- Heavy duty milled flute design.
- Hardened cutting edge for long life in hard timber.
- Fully-forged bit for maximum durability.
- Resharpenable.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits/SetsSUTTON Centre Drill Sets – Plain – Type
For drilling 60° centre holes in the end of shafts
(0 reviews)