[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

BORDO Cobalt HSS-Co5 Jobber Drill Metric Set

  • Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
  • DIN338
  • 135° Split Point (crankshaft point).
  • Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
  • The 135° point should be used to cut harder steel materials especially in deep hole applications.
  • In these situations it will produce thicker chips minimising work hardening of the cavity.
  • Faster penetration reduces abrasion and friction along the cutting edges.
  • Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
  • Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.

In Stock
SKU: N/A Categories: ,

Additional information

Set

1-10mm 19 Pce, 1-13mm 25 Pce, 1-13mm 19 Pce

Related products

  • Colour Band

    BORDO Blue Band Stub HSS-Co TiAlN Stainless Steel Drilling Metric
    • Bordo Metric Blue Band HSS-Co TiAlN Coated Stub Drills for Stainless Steel.
    • DIN1897
    • Multi-faceted point with two helical flutes with 35 degrees of helix angle.
    • The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools.
    • They are designed primarily for machining operations in lathes (screw machines) but can also be used in manual hand held drills.
    • The Blue Band – Stainless Steel – Series has been specifically designed to suit these difficult machining requirements.
    • TiAlN coating increases tool surface hardness to 87Rc.
    • For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/mm2.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Colour Band

    BORDO Yellow Band HSS Aluminium Drilling
    • Bordo Metric Yellow Band HSS Twist Drills for Aluminium and its alloys.
    • DIN338
    • 130° web thinned point with two helical flutes with 35 degrees of helix angle.
    • The alloying elements which achieve varying Aluminium Alloys have an effect on the machining properties of these materials.
    • This generally creates a difficult long chip formation and material which has tendencies to stick to the tool, placing a unique set of demands on tooling. Yellow Band Series contends with these difficulties.
    • For machining materials with Hardness < 200 HB : Tensile Strength <700 N/mm2.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Black Finish HSS

    BORDO Black Finish HSS Jobber Drill Fractional Set
    • Bordo Black Knight M2-HSS Twist Drills.
    • ANSI B94-11
    • 118° Split Point (crankshaft point)
    • Split point is self centering and reduces the need for end thrust.
    • Friction at workpiece is reduced.
    • 118° point angles are ideal for use in materials such as mild steel and cast iron.
    • The 118° point creates easily controlled chips which are wide and thin.
    • Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
    • This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
    • Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Black Finish HSS

    BORDO Black HSS Jobber Drill Metric Set
    • DIN338
    • 118° Split Point (crankshaft point)
    • Split point is self centering and reduces the need for end thrust.
    • Friction at workpiece is reduced.
    • 118° point angles are ideal for use in materials such as mild steel and cast iron.
    • The 118° point creates easily controlled chips which are wide and thin.
    • Black Finish Twist Drills (also called blue finish) achieve their distinctive colour by steam tempering, a thermal process resulting in a porous tool coating.
    • This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life.
    • Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page