Additional information
| Size | 75ml Tube, 500ml Pot, 400ml Aerosol |
|---|
CRC Copper Anti-Seize
DESCRIPTION
CRC Copper Anti-Seize and Lubricating Compound is a general purpose anti-seize lubricant that prevents seizing and galling caused by high temperatures, heavy loads, vibration and corrosion. This unique formula has a smooth texture, fine particle sizing and familiar copper colour, making it an excellent choice for closely fitted parts that need extreme lubrication. Regular use of Copper Anti-Seize will increase performance and prolong equipment life.
Applications
A copper-Based compound, safe for use on both ferrous and non-ferrous metals. CRC Copper Anti seize is electrically conductive and resistant to high temperatures, protecting parts up to 982°C. It makes a good choice for use on soft metals as it does not compromise integrity of soft metals. It does not harden, and heat does not affect the lubricating qualities of this product.
Features/Benefits:
Lubricates, prevents seizing and galling of surfaces.Highly suitable for closely fitting parts.Recommended for use on bolts, bushings, fittings, flanges, gaskets, headers, manifolds, nuts, packings, pipes, plugs, screws, studs, threaded surfaces and wire
Related products
-
Corrosion InhibitorsCRC Etch It
DESCRIPTION
CRC Etch It is a single pack etch primer with excellent adhesion to bare metal. It is formulated for etching and key-coating bare aluminium, stainless steel, brass, copper and galvanised metal surfaces and forms a tenacious key coat to provide adhesion for a paint system.Applications
Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply one thin coat with smooth even strokes to clean, dry surface holding can approximately 25cm from surface. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.
Features/Benefits:
Provides adhesion for top coating aluminium, stainless steel, brass, copper and galvanised iron. Tough durable film. Fast drying. Compatible with most standard decorative paint systems for metals. Effective on clean metals. Ready to Use Aerosol – No additional mixing or chemical additives required. Easy application. No clean up.
(0 reviews) -
Corrosion InhibitorsCRC Prep It
DESCRIPTION
CRC Prep It is a single pack high build easy-sanding metal primer with a grey finish. Formulated with anti-corrosive zinc complexes, it outlasts most high build primers by inhibiting corrosion and forms a quick-drying protective coating with excellent adhesion to bare metal. CRC Prep It is ideal as a general purpose primer and filler coat over bare metal or as an intermediate coat over CRC Zinc It, Prime It, Rust Converter or Etch It or to facilitate high build and prepare surface prior to finish coating. It can be applied directly over CRC polyester automotive fillers.Applications
Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply with smooth even strokes to clean, dry surface holding can approximately 25cm from surface until desired coverage is achieved. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.
Features/Benefits:
High Build, Easy Sanding – Ideal as primer coat over bare metal or intermediate coat. Zinc enriched for corrosion protection. Excellent adhesion to bare metal. Heat Resistance – Up to 120oC. Fast drying – Touch dry in 20 minutes, recoat immediately, full cure in 24 hours. Ready to Use Aerosol – No additional mixing or chemical additives required. Easy application. No clean up. Grey finish. Does not contain CFCs, methylene chloride. Compatible with most standard decorative paint systems for metals
(0 reviews) -
Corrosion InhibitorsCRC Orange Zinc
DESCRIPTION
CRC Orange Zincs unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating and a coloured satin finish in recognised safety colours. High levels of anti-corrosive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent adhesion to bare metal. CRC Orange Zinc provides a satin top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion by forming an effective corrosion barrier. For ultimate protection, prime the metal surface with CRC Zinc It prior to applying CRC Orange Zinc. To achieve a high film build, use CRC Prep It as an intermediate coat if required. Ongoing protection can be achieved through simple re-coating within 3 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.Applications
Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply a number of thin coats with smooth even strokes to clean, dry surface holding can approximately 25cm from surface. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.
Features/Benefits:
Zinc enriched for corrosion protection – High levels of anti-corrosive zinc complexes in the dried film, embedded in a protective enamel coating Satin finish – Available in seven colours. Safety – Colours conform to British Safety Colour standards. Excellent adhesive qualities – Forms a tough coat for long-term protection. Heat Resistance – Up to 120°C. Corrosion protection – Corrosion Protection Factor 36 (up to 3 years before recoating is necessary, depending on conditions). Fast drying – Touch dry in 20 minutes, recoat within 30 minutes, full cure in 24 hours. Easy re-application over existing film and/or clean surfaces – For ongoing protection. Single coat – No over coating required.
(0 reviews) -
Corrosion InhibitorsCRC Red Urethane Seal Coat
DESCRIPTION
CRC Urethane Seal Coat is an excellent adhering one component polyurethane coating. Its abrasive resistant insulation acts as a protective film. CRC Urethane Seal Coats are stable single component polyurethane coating that dries fast, adheres well and forms a hard, durable, flexible and non-conductive film.Applications
Recommended for protecting components from condensation & moisture, protecting printed circuit boards, insulates cables & wires, coating terminal strips, screw connections, & switch boxes that are exposed to atmospheric effects, coating for electric motor windings, armature coils, commutator ends, transformer ends, coating for housings & bus bars and protective coating for tools Recommended for electrical and electronic applications
Features/Benefits:
Clear or red – available in two conformal colours. Humidity and salt spray resistant – provides heavy corrosion protection to preserve and lengthen useful life of equipment. Protection – offers protective resistance to shocks, abrasion and aggressive chemicals.
(0 reviews)