SYKES-PICKAVANT Infrared Laser Tachometer
- Non-contact Infra-Red Laser Tachometer for measuring RPM on rotating shafts, pulleys, wheels etc.
- Infra-red laser picks up signal from reflective tape which is placed on the rotating shaft
- Features bright and powerful laser optical system for easy targeting of rotating object, even in bright daylight
- Measurements can be obtained from safe and comfortable distances from 5 to 50cm
- The large 5 digits display allows measurements without the need to switch scales or multiply reading ranges
- Unit comes complete with batteries and reflective tape in a soft carrying pouch
Related products
-
Diagnostic ToolsKLEIN TOOLS Digital Multimeter Electrical Test Kit
- Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
- Meter also test batteries, diodes and continuity
- Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
- Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
- ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
- Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
- RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld
IC-PM-500
This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.
Series 500 Lithium Air Quality Portable Monitor features and specifications:Features:– Simple to use, easy to maintain, multiple applications.– Interchangeable gas sensor heads.– Field replaceable long life Lithium battery (up to 8 hours).– Minimum, maximum and average readings.Specifications:– Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F– Reading functions: Instant, minimum, maximum, average– Sensor head: Interchangeable, replaceable– Display status indicators: Battery, sensor, standby– Sensor calibration: Zero and gain calibration– Analog output: 0-5 V– Digital Interface: RS-232 to USB– Data logging: Up to 8,188 records (2706 incl. Temp/RH)– PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.– Clock function: Real time– Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)– Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h– Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent– Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)– Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing– Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RHParticulate Matter Sensor features and specifications:The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.– Range: 0.000 to 1.000 mg /m3– Measurement Parameters: PM2.5 and PM10– Sensor Type: Laser particle counter– Minimum Detection Limit: 0.001 mg/m3– Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)– Resolution: 0.001 mg/3– Response Time: 5 Seconds– Temp: 0 to 40C– Relative Humidity: 0 to 90% non-condensating(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Scarlet Heat Stress Detector
IC-TWL-1SPlease note; These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.Features:– Dash board: Colorful LCD backlight tells you the risk level based on the TWL value. Work-rest schedule and fluid intake are integrated into the display. A countdown timer shows the time remaining before a recommended rest.
– Cup anemometer captures winds from any direction. You do not have to manually decide the wind direction before measuring the wind speed. Compared to the impeller, wind cup is not restricted to the direction of the wind. It considers all the horizontal components of winds that move the anemometer. A silicone pad covers the top of the bearing to prevent it from dust accumulation.– Data Logger : TWL-1S can record data with configurable sampling rate. PC side software helps download the data for further analysis using other analytical tools, and it also synchronizes the date and time of the device with PC.– Optimised Globe: TWL theory considers Mean Radiant Temperature (MRT), the most important parameter governing human energy balance. MRT can be derived from globe temperature (GT) measured by the black-bulb thermometer. The smaller the surface area of the black bulb, the greater the effect of the air temperature and air velocity is, thus causing inaccuracy of the calculation of MRT. Therefore, it needs a modifying formula to adjust it to the standard globe bulb with a diameter of 15 cm. The 7.5 cm globe bulb is the optimal size for a portable based on our research and experiments.– Sensor Protection : Delicate temperature and humidity sensor are well protected by a replaceable polypropylene (PP) filter in a solid shield, exempted the sensors from dust damage and external strike. A silicone pad protects the mechanism of anemometer from dust.Measurement specifications:– Air Temperature (Range): 0-60 C
– Air Temperature (Accuracy): 0.6 C– Globe Bulb Indoor (Range) 0-80 C– Globe Bulb Indoor (Accuracy): 1.0 C (15…40 C); 1.5 C (others)– Globe Bulb Outdoor (Range): 0-80 C– Globe Bulb Outdoor (Accuracy): 1.5 C (15…40 C); 2.0 C (others)– Relative Humidity (Range): 5-95 %rh– Relative Humidity (Accuracy): 3% (at 25 C; 10…90 %rh) 5% (others)– Wind Speed (Range): 0.5 – 10 m/s– Wind Speed (Accuracy): (2% of reading + 0.2) m/sMeter specifications:– Operating range electronics: -1060 C
– Accuracy at 23 5 C: 1.0 %rh / 0.2 K– Power supply / consumption: 4 AAA 3V battery, power supply 4 mA consumption without lighting– Probe protection: Polypropylene plastic cage– Calibration / adjustment: Scarlet calibration kit– Measurement interval: 2 seconds– Back-light: with Back-light– Alarm indicators: Yes– Battery indicator: Low Batt. Display– Software: Scarlet TWLIT– Risk level indicator: Yes. 3 color LCD backlight: red (risk), yellow (med), green (safe)– Data logger: Yes. Min data rate 10 min, 2,000 data.– Connection Interface: Mini USB (UART)– Enclosure material: ABS(0 reviews) -
Diagnostic ToolsSP TOOLS Professional Timing Light
- 4 function digital display readout and easy to read backlit LCD
- Heavy duty inductive pick-up and clamps
- One handed operation
- Detachable leads for easy replacement and use
- Protective hand guard for added safety
- Rotating barrel for better aim at timing mark and LCD viewing angle
- Patented Skip circuitry – Tests up to 10,000 RPM
- Easy access slim-line barrel
- Optical correct lens
- Shock resistant boots
- Tachometer: 249 to 9,990 RPM (+/-1% accuracy)
- Advance degrees (2 and 4 cycle DIS and conventional): 0º to 90º (+/- 5º accuracy)
- Dwell: 0º to 180º /2-12 cylinders (+/-1% accuracy)
- Voltage: 10 to 16 volts DC (+/- 1% accuracy)
(0 reviews)
