Additional information
| Size |
|---|
AUSTLIFT Lifting Point with Key Yoke
In StockRelated products
-
Eye Bolts & Eye NutsAUSTLIFT Swivel Lifting Point Yoke
- Rotates through 360° and pivots 90°.
- Manufactured from alloy steel, quenched and tempered.
- Tested in accordance with EN1677-1.
- Certified by DGUV GS-OA 15-04.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts and cap screw are traceable to Test Certification.
- Bolts are Metric thread.
- Proof tested to 2.5 times the WLL.
- Fatigue rated to 20,000 cycles at 1.5 times the WLL.
- Meets or exceeds all the requirements of ASME B30.26.
- Quick and simple assembly, just a tapped hole is required
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Eye Bolt DIN580 Zinc
Eye bolts DIN580 are generally used as a removable lifting point where a rated female thread or nut can be utilised also can be used as a termination for chain, wire rope and other assembles where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish, manufactured with a standard larger eye. Only available in metric thread sizes.
• Conforms to DIN580 and DIN582 marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Super Weld-on Point Yoke
• Load ring pivots 180°.
• Full Loading Capacity in all directions.
• Manufactured from forged alloy steel, quenched and tempered.
• Tested in accordance with EN1677-1.
• 100% magnaflux crack detected.
• Parts individually forged with batch code to ensure full traceability.
• The permitted WLL forged onto each product for quick and easy identification.
• Lugs designed to assist the welding process.
• A protected spring keeps the loading ring in the required position. The parts are connected in such a way that they remain captive. The spring also reduces noise caused by vibrations.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Bolt on Tie down Yoke
• Designed with spring, stop at any angle supplied without bolt
• Pivots 180° and allows side load lifting.
• Manufactured from forged alloy steel, quenched and tempered.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts are traceable to Test Certification.
• Supplied without bolts; usage of Grade 10.9 or Grade 12.9 bolts is recommended.
• Proof tested to 2.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page