Premium polyurethane construction adhesive with fast build up of Strength
SikaBond®-145 SuperGrip is a premium grade one-component polyurethane construction adhesive with good initial grab and high strength after 30 minutes^. SikaBond®-145 SuperGrip is a versatile, ready to use, fast curing, general purpose construction adhesive suitable for interior and exterior use.
One-component.
Interior & exterior.
Non-shrink.
SikaBond®-145 SuperGrip is suitable for use in construction and repair applications where a permanent strong bond is required between porous-nonporous surfaces. SikaBond®-145 SuperGrip is suitable for bonding most common construction materials such as:
Wood
MDF
Concrete
Brick
Metal
Polystrene
Polyurethane foam
Some PVC
Marble
Granite
Ceramic
LOSP Timber
One-component.
Interior & exterior.
Non-shrink.
Non-sag.
High initial grab.
Adheres rapidly.
Stong bond in 30 minutes^.
Fast cure.
Solvent-free.
Resistant to heat.
Resistant to weathering.
Water resistant -D4 according to DIN En 204
Applies white, can dry translucent if applied in thin layers.
1-component neutral cure roof and gutter silicone sealant
SikaSeal® Roof & Gutter is a one-component, neutral curing, low odour silicone sealant with excellent adhesion to most construction surfaces.
SikaSeal® Roof & Gutter cures through the absorption of atmospheric moisture to give a tough but flexible waterproof seal.
Neutral cure
Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
Non-sag
Roofs
Gutters
Polycarbonate roof sheeting
Around plumbing fixtures and penetrations
General interior & exterior sealing around the home
Advantages
Neutral cure
Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
SikaBond®-115 Max Tack is a 1-part construction adhesive with high final strength which bonds most construction material substrates. Internal and sheltered outdoor use.
Easy to apply
Easy to clean
Rapid build-up of strength
An adhesive to bond most construction components such as:
Skirting boards
Wooden frames
Battens
Mouldings
Panels,
Terracotta tiles
Anodised aluminium
Polystyrene mouldings and ceiling tiles
An adhesive to bond most construction materials such as:
EPOXY HIGH PERFORMANCE CHEMICAL ANCHORING ADHESIVE
Sika AnchorFix®-3001 is an epoxy resin based, 2-part, thixotropic, 1:1 mixing ratio, high performance anchoring adhesive. It is specifically designed for anchoring threaded rods and reinforcement bars in both cracked and un-cracked dry or damp concrete.
Long open time
Can be used in damp concrete
High load capacity
Anchoring adhesive for fixing of non-expanding anchors in the following: Structural work
Rebar / steel reinforcement anchoring in new and refurbishment works
Threaded rods
Bolts and special fastening / fixing systems
Metalwork, carpentry
Handrails, balustrades and supports
Railings
Window and door frames
Substrates
Concrete (cracked and un-cracked)
Hollow and solid masonry
Wood
Natural and reconstituted stone
Solid rock
Advantages
Long open time
Can be used in damp concrete
High load capacity
ETA to ETAG 001 for anchoring in cracked concrete
ETA to ETAG 001 for rebar connections
ESR to AC308 by ICC-ES, anchoring in cracked concrete for static, wind and earthquake loading
Seismic tested (C1)
Suitable for contact with drinking water
Fire resistant
Styrene-free
Good adhesion to the substrate
Shrinkage-free hardening
Standard sealant guns can be used (250 ml cartridge)