Sika Boom® Cleaner is an active cleaner for cleaning Sika Boom® application guns and fresh Sika Boom® residue from surfaces.
Very good PU foam cleaner
Very good PU spray gun and equipment cleaner
Integral valve for precise application
Clean Sika® PU foam application equipment after use.
Removes fresh, uncured polyurethane foam residue from equipment and other surfaces, as well as cleaning and removing grease from contaminated substrates.
Multifunctional adhesive sealant for marine applications
Sikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).
Bonds well to a wide variety of substrates
Good ageing and weathering resistance
Elastic
Bonds well to a wide variety of substrates
Good ageing and weathering resistance
Elastic
Low odour
Non-corrosive
Can be over painted
Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Multi-purpose adhesive sealant with a wide adhesion range
Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
Passes EN45545-2 R1/R7 HL3
Non-corrosive
Low odour
NSF-approved for incidental food contact
Potable water approved (meets AS4020 requirements)
Usage
Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals . Suitable substrate materials are metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is ideally used for internal sealing and simple bonding applications. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-221 on materials prone to stress cracking. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
CRC Brakleen Brake and Parts Cleaner formulated to quickly and safely remove brake fluid, grease, oil and other contaminants from brake linings, pads, drums and callipers. Selected solvents, controlled evaporation, low surface tension and high density ensure superior cleaning and degreasing properties and can even lift and remove oil and grease that has already penetrated linings.
Recommended for the cleaning and effective removal of grease and oil from mechanical brake linings, drums, brake shoes, disc brake pads, discs, wedge brakes, springs, callipers, clutches, clutch discs, chains, wire ropes, dies, moulds, parts and bearings
Fast evaporation. Minimizes downtime associated with ‘clean-in-place’ cleaning methods. Residue free. Prevents harmful build-up and eliminates rinsing or wiping. Non-staining, and non-corrosive.
(0 reviews)
Add to Quote
This product has multiple variants. The options may be chosen on the product page
CRC BRAKLEEN NON FLAMMABLE is a powerful, heavy duty cleaner and degreaser for brake, clutch parts and general mechanical equipment. It is formulated to quickly and safely dissolve and flush away grease, oil, transmission fluid, brake fluid, hardened deposits and other contaminants, without the need for disassembly – reducing maintenance costs. It’s also perfect for degreasing components prior to reassembly – especially prior to thread locking.
Spray parts liberally with CRC BRAKLEEN NF and allow to run off. Air dry or dry with soft cloth If necessary, repeat application Protect rubber brake parts and painted surfaces from overspray Protect rubber brake parts and painted surfaces from overspray. Ideal for use where a non-flammable parts cleaner is required.
Quick cleaning and quick evaporating. Non-staining, non-corrosive, no residue. Does not contain silicones. No disassembly required – saves time and maintenance cost. Controlled spray action – assists cleaning through surface agitation.
(0 reviews)
Add to Quote
This product has multiple variants. The options may be chosen on the product page