Sikasil® Pool is a one component, neutral curing silicone sealant for use in swimming pools and permanently wet areas.
Very good water resistance
High chlorine resistance
Very good resistance to fungal attack
Sikasil® Pool is designed for joints in and around swimming pools, areas under permanent water immersion and frequently wet areas between tiles, concrete, glass and metals.
CRC ZINC IT is a single component zinc rich compound with a special epoxy binder and contains 95% of the highest purity zinc in the dried film, to give galvanic rust prevention.
Recommended for use on structural steel, trailers, roofs, guard rails, welding seams, rivet holes, fencing, storage tank transformers, power generation equipment, off shore oil rigs, ships, railroad equipment, substation equipment, transmission towers, touch up over galvanized coatings, coastal and ship borne installations subject to severe salt water and salt spray corrosion.
Easy to apply – aerosol only. Long term protection to steel because of cathodic action. Metallic zinc coating is universally accepted as the best method of rust prevention. Flexible continuous protective film. Does not contain lead. Excellent weldability.
Ready to use water based general purpose surface filler for use in wet areas
Sika® Filler-107 is a water based, ready to use general purpose surface and joint filler intended for use in wet areas
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Sika® Filler-107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers in wet environments such as kitchens and bathrooms.
Sika® Filler-107 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
Sika Boom® Cleaner is an active cleaner for cleaning Sika Boom® application guns and fresh Sika Boom® residue from surfaces.
Very good PU foam cleaner
Very good PU spray gun and equipment cleaner
Integral valve for precise application
Clean Sika® PU foam application equipment after use.
Removes fresh, uncured polyurethane foam residue from equipment and other surfaces, as well as cleaning and removing grease from contaminated substrates.