ALEMLUBE Low Pressure Oil System 240v Electric Piston Micropump 5min.
- Low pressure oil system 240V electric piston micropump 5 minutes pause time
- Suitable to be used with metered flow units
- Supplied with 1 litre reservoir
- In-built control, fixed pause times & low level control
- Handles up to 250 cst maximum lubricant types
- Includes outlet & 4mm tube
- Complete range of low pressure electric piston micropumps & low pressure hand operated oil pumps
- Complete range of oil flow metering components available
Related products
-
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Sight Gravity Solenoid Operated Drip Feed Oiler 3000ml
- Alemlube sight gravity brass solenoied operated drip feed oiler glass reservoir 3000ml capacity
- Made from brass, glass bottle, nitrile seals with nickel finish
- Solenoid valve operated with 1/4″ BSP fitting with 3000ml capacity
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Sight Gravity Brass Drip Feed Oiler Glass Reservoir 35ml
- Alemlube sight gravity brass drip feed oiler glass reservoir 35ml capacity
- Made from brass, plexiglass & nitrile seals
- 1/8″ BSP fitting with 35ml capacity
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMITE Relief Fitting 1/8″ Npt 45 – 80 Psi
- Alemite Relief Fittings are used on gearbox housings & bearings (kingpins, universal joints, etc.) where excessive lubrication pressure is unsuitable
- Flush type fitting with 1/8″ NPT thread type
- Relief pressure minimum 1 PSI, maximum 5 PSI
- Pressure based on using Air/Grease/Oil air at 1.2 Ft3/Hr
- Exceeds 72-hour salt spray test
- Trivalent zinc plating
- RoHS compliant
- Fittings open at predetermined pressure
- May be used with grease or oil
- Complete range of oil relief fittings & oil air vents available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Oil Flow Metering Manifold Component
- Oil flow metering unit size 5 manifold component
- Size 5 manifold
- 160 drops flow rating per minute
- Full brass construction
- Maximum operating pressure 75psi (5.5 bar)
- Suitable for lube oils between 30 cst & 800 cst
- Complete range of low pressure electric piston micropumps, and low pressure hand operated oil pumps & oil flow metering components available
(0 reviews)