CRESCENT 1320mm/52″ Rebar Cutter and Bender – 16mm/5/8″
The H.K. Porter rebar cutter and bender is perfect for any job site where rebar needs to be cut to length or bent to fit into forms. The tool’s shear cutting head is capable of cutting and bending up to 5/8-inch thick (#5) steel rebar. Cutting head and lower bar are designed to be easily mounted to a bench or work station allowing for increased leverage.
-
Features
- Shear-cut blades
- Cuts and bends to 90° or 180°
- Mounts on most flat surfaces to enhance leverage and increase safety
- Maximum rebar size capacity: 5/8 inches
- Steel construction for durability
- NEVER use any H.K. Porter cutters on electrified circuits, wire, or cable!
-
Specifications
- Weight (Catalog) : 44.00 lb
- Warranty : Full Lifetime
- Handled : Yes
- Overall Length : 52.0 in
- Packaging : Boxed
- Overall Width : 9.25 in
- Overall Height : 10.43 in
- UPC : 037103222916
- Type : Rebar Tools
- Material : Steel
- Jaw Capacity : 0.625 in
- Indexing : No
- Extendable Length : No
- Handle Color : Red
- End : Rebar Bender
- Handle Material : Steel
- Handle Length : 42.5 in
SKU: 0590RBJN
Categories: Pipe Bending Pliers, Pipe Cutters, Rebar Tools
Related products
-
Rebar Tools
CRESCENT Replacement Cutter Head for Rebar Bender
Since 1880, Crescent H.K. Porter has been the preeminent brand in industrial cutters with a worldwide reputation for quality, strength, and durability. The extensive line of products includes manual cutters, pneumatic cutters, and accessories, designed to handle everything from light wires and brushes to heavy steel rods and bars.
-
Features
- Replacement kit for HK Porter Rebar cutter and bender
- Left and Right hand forged shear cut blades
- Assemble head forged from alloy steel construction
- Specially hardened blades for performance
- 2 Assembly nuts, 1 assembly bolt and a washer
- Bender: Follower pin (includes roller), 2 sleeve rollers, 2 snap rings
- .750inch spacers (for earlier versions)
- Straight Jaws
-
Specifications
- Weight (Catalog) : 8.700 lb
- Warranty : Full Lifetime
- UPC : 037103223869
- Type : Rebar Tools
- Material : Steel
- Jaw Capacity : 0.625 in
- Indexing : No
- Extendable Length : No
- Handled : No
- Packaging : Boxed
(0 reviews) -
-
Cable Cutters - Ratchet Action 3 Stage
KNIPEX Cable Cutter – Ratchet Action 3 Stage
-
- Sturdy. Easy to use. Stable
- Innovative ratchet-drive
- For cable up to 60 mm diameter
- Easy handling due to low weight (825 g) and compact construction (320 mm length) – also usable in confined areas
- Cutting through copper and aluminium cables with diameters of up to 60 mm in one-hand and two-hand operation
- Hardened cutting edges, precisely ground, cut smoothly and neatly without crushing
- For cutting copper and aluminium single conductors as well as multiple stranded cables (not suitable for steel wire and wire ropes)
- Innovative three-stage ratchet-drive with high leverage for easy cutting in one-hand and two-hand operation
- Fixed handle with support area for putting down the pliers when cutting
- High-grade special tool steel, forged, oil-hardened
- 320mm
(0 reviews) -
-
Pipe Cutters
KNIPEX TubiX® XL Pipe Cutter
- Cuts pipes from Ø 6 – 76mm (1/4” – 3”) and a wall thickness up to 2mm
- Cutting wheel made of high-grade ball-bearing steel
- Quick replacement of the cutting wheel without any tools needed – spare cutting wheel stored in the handle
- Lightweight and durable aluminium housing
- Removable, precision-ground deburring tool
- For plumbing, heating and air conditioning: easily cut gas and water pipes made of copper, brass and stainless steel
- For the electrical trade: cuts rigid steel conduits and for stripping steel wire armoured cables
ATTRIBUTES
Cutting Capacity Ø 6-76mm / 1/4 – 3inch Description – Short The perfect cut for larger pipes with QuickLock mechanism. Significantly easier pipe cutting due to the combination of the QuickLock mechanism and guide rollers with needle-bearings Dimensions 260 x 170 x 45 mm Length 260mm Spares Part no: 90 31 03 E01 – Deburring tool
Part no: 90 39 02 V01 – Cutting wheel
Part no: 90 39 02 V03 – Pack of 5x cutting wheelsStyle Cutter for XL Copper, Brass and Stainless Steel Pipes Weight 950g (0 reviews) -
Pipe Cutters
KNIPEX DPT50 Pipe Cutter
- Ideal for plumbing and industrial use – cuts and chamfers 32, 40, and 50mm plastic pipes in a single step
- Clean, smooth cuts: no readjustment, no need for deburring and no cracking of brittle materials
- Designed for PVC, PP and PE pipes with wall thicknesses of 2.5 – 3.5mm
- Self-adjusting rollers with plain bearings ensure optimal pipe guidance and effortless cutting
- Precise cut alignment with a clear view of the cutting point
- High-performance, multi-piece blade – extremely sharp and reversible for double the lifespan
- Spring-loaded blade ensures no unnecessary adjustment
- Constructed from tough, glass fibre reinforced plastic
ATTRIBUTES
Barcode 4003773092186 Cutting Capacity Ø 32, 40, 50mm and 2.5 – 3.5mm wall thickness Length 202mm Spare Blades Part No. 90 23 02 E01 Style Cutter for Plastic Pipes Weight 295g (0 reviews)




